John Kennedy wrote:
Good morning,
i am trying to establish a network using
1 RH-9 server [ LAN ] 2 hosts [ NK and LK ]
The dialup server [ LAN ] has 2 nics [eth0 and eth1] which are connected to [NK] and [LK] by Crossover Cables directly [I'm not using a Hub]
My Problem:
I can ping successfully from LAN to both LK AND NK...
I can ping from NK to both of the nics on LAN, but not to the nic on LK. And i can access the Internet from NK as well.
I can not ping anything from LK to LAN or NK
Is my routing screwed up? I'm confused. Thanks in advance for any help I'm given.
Johnny
My routing setup.....
[root@lan root]# netstat -nr
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
10.112.112.112 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
172.17.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 10.112.112.112 0.0.0.0 UG 0 0 0 ppp0
My /etc/hosts file.... # Do not remove the following line, or various programs # that require network functionality will fail. 127.0.0.1 lan.famlan.abc lan localhost.localdomain localhost
192.168.1.100 lan.famlan.abc lan [ this is= eth0 ] 192.168.1.105 nk.famlan.abc nk
172.17.0.1 intgw2.famlan.abc intgw2 [ this is= eth1 ] 172.17.0.2 lk.famlan.abc 39zv701 lk
-- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
