Scsi cd-rom support in arjanv's 2.6 test series kernel ?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello all,

Has anyone out there had any problems with their scsi cdrom when running
arjanv's 2.6 test series kernels ?

The problem I am having with it is, the kernel detects my cdrom on
startup giving me a message like

Vendor: YAMAHA Model: CRW2100S Rev: 1.0N
Type: CD-ROM ANSI SCSI revision: 02

but when i try to "mount /dev/sdc0 -t iso9660 -r /mnt/cdrom/" i get the
message "mount: special device /dev/sdc0 does not exist"

i double checked to see if the sr_mod (scsi cdrom module) was loaded and
it wasn't so i did a "modprobe sr_mod" and it loaded successfully, but
the mount command still produces the same output as it did before.

Also when I do an "ls /dev/scd0" it shows /dev/scd0 in yellow writing
with a black background, which i have no idea what that means.

Just to exclude some things my scsi host controller and hard disk are
working fine, and I can also use my ide cdrom drive.

Any thoughts on this would be much appreciated,
Thanks,
Adam Bowns 
-- 

+--------------------------------+
|           Adam Bowns           |
| Email: adam-bowns@xxxxxxxxxxxx |
|     http://www.bowns.co.uk     |
+--------------------------------+


-- 
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list

[Index of Archives]     [CentOS]     [Kernel Development]     [PAM]     [Fedora Users]     [Red Hat Development]     [Big List of Linux Books]     [Linux Admin]     [Gimp]     [Asterisk PBX]     [Yosemite News]     [Red Hat Crash Utility]


  Powered by Linux