Pin 1 is on the left if the "hook" is on the bottom. Like an earlier poster said, it really doesn't matter what color goes where, as it's the order that counts. The most common standard used these days (568B) is as Harold pointed out: 1 White-orange 2 Orange 3 White-green 4 Blue 5 White-blue 6 Green 7 White-brown 8 Brown It's also worth mentioning that if you want to make a crossover cable, just swap the orange and green pairs on 1 end of the cable. > -----Original Message----- > From: cajun [mailto:cajunlee@xxxxxxxxxx] > Sent: Friday, October 03, 2003 11:18 AM > To: redhat-list@xxxxxxxxxx > Subject: Re: Using RJ45 crimp tool > > > Harold Martin wrote: > > >Hello, > >Can anyone point mt toward a how-to on using an RJ45 crimp tool? > >Thanks, > >Harold > > > > > > > > > Hi Harold, > > I don't think there is any how to on that. What are you > needing to know > exactly? Or you needing to know the pin out for the wiring? > If so here > is what I have always used: > > Pin No. Strand Color > 1 white & orange > 2 orange > 3 white & green > 4 blue > 5 white & blue > 6 green > 7 white & brown > 8 brown > > HTH!! > > Lee Perez > > > -- > redhat-list mailing list > unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe > https://www.redhat.com/mailman/listinfo/redhat-list > -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
