Hi,
Is there a way to find out which process consumed CPU cores as per the
below sar output? OS is Red Hat Enterprise Linux Server release 7.7 (Maipo)
with 64-bit arch.
04:40:01 PM CPU %user %nice %system %iowait %steal
%idle
04:50:01 PM all 4.25 0.00 0.69 0.00 0.03
95.03
05:00:01 PM all 4.41 0.00 0.70 0.00 0.03
94.85
*05:10:02 PM all 40.92 0.01 1.23 0.01 0.06
57.7705:20:01 PM all 90.54 0.00 0.90 0.00 0.02
8.5305:30:01 PM all 19.06 0.00 1.53 1.25
0.04 78.12*
05:40:01 PM all 3.99 0.00 0.29 0.03 0.02
95.66
05:50:01 PM all 2.97 0.00 0.25 0.00 0.02
96.75
06:00:01 PM all 2.69 0.00 0.24 0.00 0.02
97.04
06:10:01 PM all 2.61 0.01 0.26 0.00 0.02
97.09
# lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 8
On-line CPU(s) list: 0-7
Thread(s) per core: 2
Core(s) per socket: 4
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 63
Model name: Intel(R) Xeon(R) CPU E5-2666 v3 @ 2.90GHz
Stepping: 2
CPU MHz: 2899.842
BogoMIPS: 5800.13
Hypervisor vendor: Xen
Virtualization type: full
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 25600K
NUMA node0 CPU(s): 0-7
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx pdpe1gb rdtscp
lm constant_tsc rep_good nopl xtopology eagerfpu pni pclmulqdq ssse3 fma
cx16 pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave
avx f16c rdrand hypervisor lahf_lm abm invpcid_single fsgsbase bmi1 avx2
smep bmi2 erms invpcid xsaveopt
# nproc
8
#
Thanks in advance and i look forward to hearing from you.
Best Regards,
Kaushal
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
