Hello,
With RHEL6 on a SAN environment, is it possible to display dead paths
with "multipath" ?
This is the output of "multipath -ll" a RHEL4 server :
data (360050768028107fac00000000000009f)
[size=150 GB][features="1 queue_if_no_path"][hwhandler="0"]
\_ round-robin 0 [enabled]
\_ 3:0:0:2 sde 8:64 [failed][faulty]
\_ 4:0:0:2 sdm 8:192 [failed][faulty]
\_ round-robin 0 [prio=20][active]
\_ 3:0:1:2 sdi 8:128 [active][ready]
\_ 4:0:1:2 sdq 65:0 [active][ready]
We can see failed paths. And this is the output on RHEL6 :
sata (360050768028107fac0000000000000d0) dm-3 IBM,2145
size=170G features='1 queue_if_no_path' hwhandler='0' wp=rw
`-+- policy='round-robin 0' prio=10 status=active
|- 4:0:1:1 sdf 8:80 active ready running
`- 3:0:1:1 sdj 8:144 active ready running
Increasing the verbose level of "multipath" doesn't work (the
"/etc/multipath.conf" file is classic on both systems).
Thanks,
Nicolas
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
