Also if you are using RHEL 5 / 6, you might want to check under /sys or use the systool comnand to extract enough info about the HBAs - Ajay On Mar 14, 2012 9:51 AM, "ajay raghuraj" <ajay.raghuraj@xxxxxxxxx> wrote: > Hi > > Try ethtool or peek into /proc to check the network interface stats. You > could use the HBA vendor's software installed on the OS to support the > hardware. > > Example: If the HBA were from emulex then you could check the hbaanywhere > cli commands to run a healthcheck > > - Ajay > On Mar 13, 2012 9:39 PM, "unix syzadmin" <unixsyzadmin@xxxxxxxxx> wrote: > > > > Thanks. > > I have downloaded and installed the OpenManage from Dell. > > The following commands say if the health of system components is OK. > > omreport chassis - health of all main components of the system chassis > > omreport chassis processors - cpu health > > omreport chassis memory - memory health > > omreport chassis pwrsupplies - power supply health > > omreport storage controller - raid controller health > > > > However this leaves out the integrated NIC ports and the HBA adapters. > > What linux / dell open manage commands can be used to confirm if those > are > > healthy as well? > > > > Thanks, > > > > > > On Mon, Mar 12, 2012 at 9:00 PM, Paul Tader <ptader@xxxxxxxxxxxxxx> > wrote: > > > > > On 3/12/12 5:28 PM, unix syzadmin wrote: > > > > > >> Hi, > > >> > > >> We run redhat linux on intel hardware (mostly Dell, lately dell > R710s). > > >> We want to be able to catch any hardware issues when they occur to > act on > > >> them as quickly as possible. > > >> > > >> My understanding is that all hardware events/issues/errors are logged > in > > >> /var/log/mcelog (Machine Check Events log). Is this correct? Can't > > >> stress > > >> this enough; does it log all hardware issues > > >> (cpu,memory,disk,ethernet,**fibre/hba etc) ? > > >> > > >> Thanks, > > >> > > > > > > I've used MCElog to catch some CPU events but I think you might want to > > > check out Dell's OpenManage client. It will report/monitor a lot more > > > information. > > > > > > > > > http://linux.dell.com/wiki/**index.php/Repository/OMSA< > http://linux.dell.com/wiki/index.php/Repository/OMSA> > > > > > > > > > To install: > > > > > > # wget -q -O - > http://linux.dell.com/repo/**hardware/latest/bootstrap.cgi< > http://linux.dell.com/repo/hardware/latest/bootstrap.cgi>| bash > > > # yum install srvadmin-base > > > # yum install srvadmin-storageservices > > > > > > (logout / login for environment variables to take effect) > > > > > > # /opt/dell/srvadmin/sbin/**srvadmin-services.sh start > > > ... > > > > > > # omreport chassis > > > Health > > > > > > Main System Chassis > > > > > > SEVERITY : COMPONENT > > > Ok : Fans > > > Ok : Intrusion > > > Ok : Memory > > > Ok : Power Supplies > > > Ok : Processors > > > Ok : Temperatures > > > Ok : Voltages > > > Ok : Hardware Log > > > Ok : Batteries > > > > > > # omreport chassis temps > > > Temperature Probes Information > > > > > > ------------------------------**------ > > > Main System Chassis Temperatures: Ok > > > ------------------------------**------ > > > > > > Index : 0 > > > Status : Ok > > > Probe Name : System Board Ambient Temp > > > Reading : 20.0 C > > > Minimum Warning Threshold : 8.0 C > > > Maximum Warning Threshold : 42.0 C > > > Minimum Failure Threshold : 3.0 C > > > Maximum Failure Threshold : 47.0 C > > > > > > # omreport storage pdisk controller=0 > > > > > > List of Physical Disks on Controller SAS 6/iR Integrated (Embedded) > > > > > > Controller SAS 6/iR Integrated (Embedded) > > > ID : 0:0:0 > > > Status : Ok > > > Name : Physical Disk 0:0:0 > > > State : Online > > > Failure Predicted : No > > > Certified : Not Applicable > > > Encryption Capable : No > > > Secured : Not Applicable > > > Progress : Not Applicable > > > Bus Protocol : SAS > > > Media : HDD > > > Capacity : 67.75 GB (72746008576 bytes) > > > Used RAID Disk Space : 67.75 GB (72746008576 bytes) > > > Available RAID Disk Space : 0.00 GB (0 bytes) > > > Hot Spare : No > > > Vendor ID : DELL > > > Product ID : ST973402SS > > > Revision : S229 > > > > > > <snip> > > > > > > You get the idea. > > > > > > -- > > > redhat-list mailing list > > > unsubscribe mailto:redhat-list-request@**redhat.com< > redhat-list-request@xxxxxxxxxx> > > > ?subject=unsubscribe > > > https://www.redhat.com/**mailman/listinfo/redhat-list< > https://www.redhat.com/mailman/listinfo/redhat-list> > > > > > -- > > redhat-list mailing list > > unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe > > https://www.redhat.com/mailman/listinfo/redhat-list > -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
