On Tue, Mar 13, 2012 at 1:36 PM, unix syzadmin <unixsyzadmin@xxxxxxxxx>wrote: > Thanks. > I have downloaded and installed the OpenManage from Dell. > The following commands say if the health of system components is OK. > omreport chassis - health of all main components of the system chassis > omreport chassis processors - cpu health > omreport chassis memory - memory health > omreport chassis pwrsupplies - power supply health > omreport storage controller - raid controller health > > However this leaves out the integrated NIC ports and the HBA adapters. > What linux / dell open manage commands can be used to confirm if those are > healthy as well? > > Thanks, > > > On Mon, Mar 12, 2012 at 9:00 PM, Paul Tader <ptader@xxxxxxxxxxxxxx> wrote: > > > On 3/12/12 5:28 PM, unix syzadmin wrote: > > > >> Hi, > >> > >> We run redhat linux on intel hardware (mostly Dell, lately dell R710s). > >> We want to be able to catch any hardware issues when they occur to act > on > >> them as quickly as possible. > >> > >> My understanding is that all hardware events/issues/errors are logged in > >> /var/log/mcelog (Machine Check Events log). Is this correct? Can't > >> stress > >> this enough; does it log all hardware issues > >> (cpu,memory,disk,ethernet,**fibre/hba etc) ? > >> > >> Thanks, > >> > > > > I've used MCElog to catch some CPU events but I think you might want to > > check out Dell's OpenManage client. It will report/monitor a lot more > > information. > > > > > > http://linux.dell.com/wiki/**index.php/Repository/OMSA< > http://linux.dell.com/wiki/index.php/Repository/OMSA> > > > > > > To install: > > > > # wget -q -O - > http://linux.dell.com/repo/**hardware/latest/bootstrap.cgi< > http://linux.dell.com/repo/hardware/latest/bootstrap.cgi>| bash > > # yum install srvadmin-base > > # yum install srvadmin-storageservices > > > > (logout / login for environment variables to take effect) > > > > # /opt/dell/srvadmin/sbin/**srvadmin-services.sh start > > ... > > > > # omreport chassis > > Health > > > > Main System Chassis > > > > SEVERITY : COMPONENT > > Ok : Fans > > Ok : Intrusion > > Ok : Memory > > Ok : Power Supplies > > Ok : Processors > > Ok : Temperatures > > Ok : Voltages > > Ok : Hardware Log > > Ok : Batteries > > > > # omreport chassis temps > > Temperature Probes Information > > > > ------------------------------**------ > > Main System Chassis Temperatures: Ok > > ------------------------------**------ > > > > Index : 0 > > Status : Ok > > Probe Name : System Board Ambient Temp > > Reading : 20.0 C > > Minimum Warning Threshold : 8.0 C > > Maximum Warning Threshold : 42.0 C > > Minimum Failure Threshold : 3.0 C > > Maximum Failure Threshold : 47.0 C > > > > # omreport storage pdisk controller=0 > > > > List of Physical Disks on Controller SAS 6/iR Integrated (Embedded) > > > > Controller SAS 6/iR Integrated (Embedded) > > ID : 0:0:0 > > Status : Ok > > Name : Physical Disk 0:0:0 > > State : Online > > Failure Predicted : No > > Certified : Not Applicable > > Encryption Capable : No > > Secured : Not Applicable > > Progress : Not Applicable > > Bus Protocol : SAS > > Media : HDD > > Capacity : 67.75 GB (72746008576 bytes) > > Used RAID Disk Space : 67.75 GB (72746008576 bytes) > > Available RAID Disk Space : 0.00 GB (0 bytes) > > Hot Spare : No > > Vendor ID : DELL > > Product ID : ST973402SS > > Revision : S229 > > > > <snip> > > > > You get the idea. > > > > -- > > redhat-list mailing list > > unsubscribe mailto:redhat-list-request@**redhat.com< > redhat-list-request@xxxxxxxxxx> > > ?subject=unsubscribe > > https://www.redhat.com/**mailman/listinfo/redhat-list< > https://www.redhat.com/mailman/listinfo/redhat-list> > > > -- > redhat-list mailing list > unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe > https://www.redhat.com/mailman/listinfo/redhat-list > Have you installed all OMSA components? See the CLI User's Guide http://support.dell.com/support/edocs/software/svradmin/7.0/en/index.htm http://support.dell.com/support/edocs/software/svradmin/7.0/en/CLI/PDF/CLIUG.pdf Have you tried to open 1311 port and connect to the https://<server>:1311 to check if the OMSA is showing everything? You can try: omreport system summary or omreport servermodule summary or omreport chassis nics index=n or omreport mainsystem nics index=n or omreport chassis nics config=team index=n or omreport mainsystem nics config=team index=n Regards, Ges -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
