Problem with Partition tweaking

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear All,

I have satelite C640 Toshiba laptop with 500GB HD.
Iam using dual boot with Windows 7 and RHEL 6.
I have previously given 200GB to a backup partion with ntfs formating, I was running out of space to install Fedora 16 so I have taken backup of D: drive and deleted it using fdisk and recreating it with 110 GB partition with ntfs partition. Leaving around 90GB of free disk space. Now Iam unable to create new patition with fdisk or by installing the fedora 16.
Below are some commands output. 

Kindly give a solution to the problem.
Thanks in Advance.  



[root@localhost Desktop]# fdisk /dev/sda

WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
         switch off the mode (command 'c') and change display units to
         sectors (command 'u').

Command (m for help): p

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x8321ce36

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1          13      102400    7  HPFS/NTFS
Partition 1 does not end on cylinder boundary.
/dev/sda2              13        6375    51096576    7  HPFS/NTFS
/dev/sda3            6375       20735   115353887+   7  HPFS/NTFS
/dev/sda4           32891       60802   224194560    5  Extended
/dev/sda5           32891       33226     2688000   83  Linux
/dev/sda6           33226       43266    80645120   83  Linux
/dev/sda7           43266       49959    53763072   83  Linux
/dev/sda8           49959       56652    53763072   83  Linux
/dev/sda9           56652       60668    32258048   82  Linux swap / Solaris
/dev/sda10          60668       60802     1071104    6  FAT16

Command (m for help): n
No free sectors available

Command (m for help): c
DOS Compatibility flag is not set

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.

WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
Syncing disks.



[root@localhost Desktop]# partprobe /dev/sda
Warning: WARNING: the kernel failed to re-read the partition table on /dev/sda (Device or resource busy).  As a result, it may not reflect all of your changes until after reboot.
[root@localhost Desktop]# ^C



Thanks and Regards,

Prashant Singh Genda



________________________________
 From: "redhat-list-request@xxxxxxxxxx" <redhat-list-request@xxxxxxxxxx>
To: redhat-list@xxxxxxxxxx 
Sent: Wednesday, 21 December 2011 10:30 PM
Subject: redhat-list Digest, Vol 94, Issue 9
 
Send redhat-list mailing list submissions to
    redhat-list@xxxxxxxxxx

To subscribe or unsubscribe via the World Wide Web, visit
    https://www.redhat.com/mailman/listinfo/redhat-list
or, via email, send a message with subject or body 'help' to
    redhat-list-request@xxxxxxxxxx

You can reach the person managing the list at
    redhat-list-owner@xxxxxxxxxx

When replying, please edit your Subject line so it is more specific
than "Re: Contents of redhat-list digest..."


Today's Topics:

   1. 2 master with 1 slave ? (Piyush Sharma)


----------------------------------------------------------------------

Message: 1
Date: Wed, 21 Dec 2011 17:22:16 +0530
From: Piyush Sharma <piyushmap@xxxxxxxxx>
To: redhat-list@xxxxxxxxxx
Subject: 2 master with 1 slave ?
Message-ID:
    <CAF4e9NK2C84j1a3+5KZEPvuMZumELT09v8mjokEufD2KHfw+AQ@xxxxxxxxxxxxxx>
Content-Type: text/plain; charset=ISO-8859-1

Hi,

How to configure 2 master dns server with 1 slave dns server ?

   zone "example.com." IN {
       type slave;
           masters { 192.168.10.10; };
       file "slave/abc.zone";
   };
   zone "10.in-addr.arpa." IN {
       type slave;
           masters { 192.168.10.1; };
       file "slave/abc-rev.zone";
   };

Now how to configure multiple master in slave server with different-2 file
   name ?

-- 
Regards,


Piyush M Sharma
My Linux Blog <http://www.linuxsurgeon.org/kb>
RedHat Certified Engineer
09413194321
Linux Administrator

http://in.linkedin.com/in/linuxboy

Skype Id :- piyushbmap


------------------------------

__
redhat-list mailing list
Unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list

End of redhat-list Digest, Vol 94, Issue 9
******************************************
-- 
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list



[Index of Archives]     [CentOS]     [Kernel Development]     [PAM]     [Fedora Users]     [Red Hat Development]     [Big List of Linux Books]     [Linux Admin]     [Gimp]     [Asterisk PBX]     [Yosemite News]     [Red Hat Crash Utility]


  Powered by Linux