Hello All,
I just wonder if it is known case that right after installation of RHEL
5.3 x64 on FTS RX300 S6 the grub is even not loading.
What I've done is standard RAID (mirroring) configuration in the LSI
menu (CTRL + C during post)
hd1 + hd3 = mirror1
hd2 + hd4 = mirror2
I've booter from DVD installed like via gui (no lvm) everything on sda:
/boot ext3 200MB (sda1)
/ ext3 40960MB (sda2)
Swap ext3 20480MB
/opt ext3 <Free space>
/var ext3 10240MB
/usr ext3 10240MB
/home ext3 20480MB
/tmp ext3 20480MB
Then after reboot when the server wants to boot the screen becomes
black, and there is no grub.
I've booted to rescue mode with rhel DVD, performed grub installation
"setup (hd0) (hd0,0)" the result was successful but still after reboot
the screen is black :(.
Do you have any hints about this?
Do you think that using dd to load stage1 directly into /dev/sda could
be good idea?
Regards
Tomek
--
Tomasz Ostrowski
Nokia Siemens Networks Ltd, Thailand
OPS Integrated OEM and Digital Supply/APAC
Mobile NEW: +66 824 85 87 70
Time Zone: GMT+7
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
