Le 05/06/2011 12:55, Nicolas C. a écrit :
Hello,
I've installed Red Hat Enterprise Linux 6 on a Dell PowerEdge M610 blade
server connected to a SAN. It works but the internal RAID of the server
(not multipathed) is appearing on the "multipath -ll" output :
mpathc (3600508e000000000108c991ede8ca20f) dm-0 Dell,VIRTUAL DISK
size=136G features='0' hwhandler='0' wp=rw
`-+- policy='round-robin 0' prio=1 status=active
`- 2:1:0:0 sdi 8:128 active ready running
I tried to blacklist it by adding this at the /etc/multipath.conf, but
it has no effect :
blacklist {
wwid 3600508e000000000108c991ede8ca20f
}
I have no problem with RHEL5.
Reply to myself : multipath is loaded early in the boot process, the
multipath.conf is embedded in the initrd.
After changes in the multipath.conf file, initrd must be rebuilded with
"dracut".
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
