Hi, If the mapper device have been created suceesfully then you may try to map the raw devices on rc script (rc.local) This worked for me. My rc.local looks like; MAKEDEV raw sleep 2 raw /dev/raw/raw1 /dev/mapper/mpath1p1 Hope this helps. Regards, Raj On Tue, Jan 25, 2011 at 10:17 PM, Matty Sarro <msarro@xxxxxxxxx> wrote: > Hey everyone. I am trying to run Oracle ORION, which requires that we > provide raw disk mappings for it to run. This is to perform a SAN > evaluation. > I have created /dev/raw/. > I have edited the /etc/udev/rules.d/60-raw.rules file trying the > following configurations: > > ACTION=="add", KERNEL="/dev/mpath/mpath0",RUN+="/bin/raw /dev/raw/raw0 %N" > ACTION=="add", KERNEL="/dev/mpath/mpath1",RUN+="/bin/raw /dev/raw/raw1 %N" > ACTION=="add", KERNEL="/dev/mpath/mpath2",RUN+="/bin/raw /dev/raw/raw2 %N" > > ACTION=="add", KERNEL="/dev/mapper/mpath0",RUN+="/bin/raw /dev/raw/raw0 %N" > ACTION=="add", KERNEL="/dev/mapper/mpath1",RUN+="/bin/raw /dev/raw/raw1 %N" > ACTION=="add", KERNEL="/dev/mapper/mpath2",RUN+="/bin/raw /dev/raw/raw2 %N" > > ACTION=="add", KERNEL="/dev/dm-0",RUN+="/bin/raw /dev/raw/raw0 %N" > ACTION=="add", KERNEL="/dev/dm-1",RUN+="/bin/raw /dev/raw/raw1 %N" > ACTION=="add", KERNEL="/dev/dm-2",RUN+="/bin/raw /dev/raw/raw2 %N" > > None of them work. After adding them, I run /sbin/start_udev. > Running raw -qa displays nothing. > > Has anyone tried this? Any advice? I've managed to get ORION running > in a handicapped fashion but it dies after the first volley of tests. > Still some usable data, but it can't do any of the large writes. > > -- > redhat-list mailing list > unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe > https://www.redhat.com/mailman/listinfo/redhat-list > -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
