When running the 'kfree_rcu_test' test case with commands [1] the call
trace [2] was thrown. This was because the kfree_scale_thread thread(s)
still run after unloading rcuscale and torture modules. Fix the call
trace by invoking kfree_scale_cleanup() from rcu_scale_cleanup() when
removing the rcuscale module.
Additionally, current rcuscale.c defines kfree_scale_cleanup() after
rcu_scale_cleanup(), to avoid the declaration of kfree_scale_cleanup()
when rcu_scale_cleanup() invoking kfree_scale_cleanup(), move
rcu_scale_cleanup() after kfree_scale_cleanup().
[1] modprobe rcuscale kfree_rcu_test=1
// After some time
rmmod rcuscale
rmmod torture
[2] BUG: unable to handle page fault for address: ffffffffc0601a87
#PF: supervisor instruction fetch in kernel mode
#PF: error_code(0x0010) - not-present page
PGD 11de4f067 P4D 11de4f067 PUD 11de51067 PMD 112f4d067 PTE 0
Oops: 0010 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 1798 Comm: kfree_scale_thr Not tainted 6.3.0-rc1-rcu+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
RIP: 0010:0xffffffffc0601a87
Code: Unable to access opcode bytes at 0xffffffffc0601a5d.
RSP: 0018:ffffb25bc2e57e18 EFLAGS: 00010297
RAX: 0000000000000000 RBX: ffffffffc061f0b6 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff962fd0de RDI: ffffffff962fd0de
RBP: ffffb25bc2e57ea8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000000 R14: 000000000000000a R15: 00000000001c1dbe
FS: 0000000000000000(0000) GS:ffff921fa2200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffc0601a5d CR3: 000000011de4c006 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? kvfree_call_rcu+0xf0/0x3a0
? kthread+0xf3/0x120
? kthread_complete_and_exit+0x20/0x20
? ret_from_fork+0x1f/0x30
</TASK>
Modules linked in: rfkill sunrpc ... [last unloaded: torture]
CR2: ffffffffc0601a87
---[ end trace 0000000000000000 ]---
Fixes: e6e78b004fa7 ("rcuperf: Add kfree_rcu() performance Tests")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@xxxxxxxxx>
---
v1 -> v2:
- Move rcu_scale_cleanup() after kfree_scale_cleanup() to eliminate the
declaration of kfree_scale_cleanup().
- Remove the unnecessary step "modprobe torture" from the commit message.
- Add the description for why move rcu_scale_cleanup() after
kfree_scale_cleanup() to the commit message.
Thanks Paul's comments on eliminating the extra function declaration and
removing the unnecessary "modprobe torture" from the commit message.
Thanks Joel's constructive comments that for long-term maintenance we may
need to split out the common code within current {ref,rcu}scale.c files.
kernel/rcu/rcuscale.c | 201 ++++++++++++++++++++++--------------------
1 file changed, 103 insertions(+), 98 deletions(-)
diff --git a/kernel/rcu/rcuscale.c b/kernel/rcu/rcuscale.c
index 91fb5905a008..5a000d26f03e 100644
--- a/kernel/rcu/rcuscale.c
+++ b/kernel/rcu/rcuscale.c
@@ -522,89 +522,6 @@ rcu_scale_print_module_parms(struct rcu_scale_ops *cur_ops, const char *tag)
scale_type, tag, nrealreaders, nrealwriters, verbose, shutdown);
}
-static void
-rcu_scale_cleanup(void)
-{
- int i;
- int j;
- int ngps = 0;
- u64 *wdp;
- u64 *wdpp;
-
- /*
- * Would like warning at start, but everything is expedited
- * during the mid-boot phase, so have to wait till the end.
- */
- if (rcu_gp_is_expedited() && !rcu_gp_is_normal() && !gp_exp)
- SCALEOUT_ERRSTRING("All grace periods expedited, no normal ones to measure!");
- if (rcu_gp_is_normal() && gp_exp)
- SCALEOUT_ERRSTRING("All grace periods normal, no expedited ones to measure!");
- if (gp_exp && gp_async)
- SCALEOUT_ERRSTRING("No expedited async GPs, so went with async!");
-
- if (torture_cleanup_begin())
- return;
- if (!cur_ops) {
- torture_cleanup_end();
- return;
- }
-
- if (reader_tasks) {
- for (i = 0; i < nrealreaders; i++)
- torture_stop_kthread(rcu_scale_reader,
- reader_tasks[i]);
- kfree(reader_tasks);
- }
-
- if (writer_tasks) {
- for (i = 0; i < nrealwriters; i++) {
- torture_stop_kthread(rcu_scale_writer,
- writer_tasks[i]);
- if (!writer_n_durations)
- continue;
- j = writer_n_durations[i];
- pr_alert("%s%s writer %d gps: %d\n",
- scale_type, SCALE_FLAG, i, j);
- ngps += j;
- }
- pr_alert("%s%s start: %llu end: %llu duration: %llu gps: %d batches: %ld\n",
- scale_type, SCALE_FLAG,
- t_rcu_scale_writer_started, t_rcu_scale_writer_finished,
- t_rcu_scale_writer_finished -
- t_rcu_scale_writer_started,
- ngps,
- rcuscale_seq_diff(b_rcu_gp_test_finished,
- b_rcu_gp_test_started));
- for (i = 0; i < nrealwriters; i++) {
- if (!writer_durations)
- break;
- if (!writer_n_durations)
- continue;
- wdpp = writer_durations[i];
- if (!wdpp)
- continue;
- for (j = 0; j < writer_n_durations[i]; j++) {
- wdp = &wdpp[j];
- pr_alert("%s%s %4d writer-duration: %5d %llu\n",
- scale_type, SCALE_FLAG,
- i, j, *wdp);
- if (j % 100 == 0)
- schedule_timeout_uninterruptible(1);
- }
- kfree(writer_durations[i]);
- }
- kfree(writer_tasks);
- kfree(writer_durations);
- kfree(writer_n_durations);
- }
-
- /* Do torture-type-specific cleanup operations. */
- if (cur_ops->cleanup != NULL)
- cur_ops->cleanup();
-
- torture_cleanup_end();
-}
-
/*
* Return the number if non-negative. If -1, the number of CPUs.
* If less than -1, that much less than the number of CPUs, but
@@ -624,21 +541,6 @@ static int compute_real(int n)
return nr;
}
-/*
- * RCU scalability shutdown kthread. Just waits to be awakened, then shuts
- * down system.
- */
-static int
-rcu_scale_shutdown(void *arg)
-{
- wait_event(shutdown_wq,
- atomic_read(&n_rcu_scale_writer_finished) >= nrealwriters);
- smp_mb(); /* Wake before output. */
- rcu_scale_cleanup();
- kernel_power_off();
- return -EINVAL;
-}
-
/*
* kfree_rcu() scalability tests: Start a kfree_rcu() loop on all CPUs for number
* of iterations and measure total time and number of GP for all iterations to complete.
@@ -875,6 +777,109 @@ kfree_scale_init(void)
return firsterr;
}
+static void
+rcu_scale_cleanup(void)
+{
+ int i;
+ int j;
+ int ngps = 0;
+ u64 *wdp;
+ u64 *wdpp;
+
+ /*
+ * Would like warning at start, but everything is expedited
+ * during the mid-boot phase, so have to wait till the end.
+ */
+ if (rcu_gp_is_expedited() && !rcu_gp_is_normal() && !gp_exp)
+ SCALEOUT_ERRSTRING("All grace periods expedited, no normal ones to measure!");
+ if (rcu_gp_is_normal() && gp_exp)
+ SCALEOUT_ERRSTRING("All grace periods normal, no expedited ones to measure!");
+ if (gp_exp && gp_async)
+ SCALEOUT_ERRSTRING("No expedited async GPs, so went with async!");
+
+ if (kfree_rcu_test) {
+ kfree_scale_cleanup();
+ return;
+ }
+
+ if (torture_cleanup_begin())
+ return;
+ if (!cur_ops) {
+ torture_cleanup_end();
+ return;
+ }
+
+ if (reader_tasks) {
+ for (i = 0; i < nrealreaders; i++)
+ torture_stop_kthread(rcu_scale_reader,
+ reader_tasks[i]);
+ kfree(reader_tasks);
+ }
+
+ if (writer_tasks) {
+ for (i = 0; i < nrealwriters; i++) {
+ torture_stop_kthread(rcu_scale_writer,
+ writer_tasks[i]);
+ if (!writer_n_durations)
+ continue;
+ j = writer_n_durations[i];
+ pr_alert("%s%s writer %d gps: %d\n",
+ scale_type, SCALE_FLAG, i, j);
+ ngps += j;
+ }
+ pr_alert("%s%s start: %llu end: %llu duration: %llu gps: %d batches: %ld\n",
+ scale_type, SCALE_FLAG,
+ t_rcu_scale_writer_started, t_rcu_scale_writer_finished,
+ t_rcu_scale_writer_finished -
+ t_rcu_scale_writer_started,
+ ngps,
+ rcuscale_seq_diff(b_rcu_gp_test_finished,
+ b_rcu_gp_test_started));
+ for (i = 0; i < nrealwriters; i++) {
+ if (!writer_durations)
+ break;
+ if (!writer_n_durations)
+ continue;
+ wdpp = writer_durations[i];
+ if (!wdpp)
+ continue;
+ for (j = 0; j < writer_n_durations[i]; j++) {
+ wdp = &wdpp[j];
+ pr_alert("%s%s %4d writer-duration: %5d %llu\n",
+ scale_type, SCALE_FLAG,
+ i, j, *wdp);
+ if (j % 100 == 0)
+ schedule_timeout_uninterruptible(1);
+ }
+ kfree(writer_durations[i]);
+ }
+ kfree(writer_tasks);
+ kfree(writer_durations);
+ kfree(writer_n_durations);
+ }
+
+ /* Do torture-type-specific cleanup operations. */
+ if (cur_ops->cleanup != NULL)
+ cur_ops->cleanup();
+
+ torture_cleanup_end();
+}
+
+/*
+ * RCU scalability shutdown kthread. Just waits to be awakened, then shuts
+ * down system.
+ */
+static int
+rcu_scale_shutdown(void *arg)
+{
+ wait_event(shutdown_wq,
+ atomic_read(&n_rcu_scale_writer_finished) >= nrealwriters);
+ smp_mb(); /* Wake before output. */
+ rcu_scale_cleanup();
+ kernel_power_off();
+ return -EINVAL;
+}
+
static int __init
rcu_scale_init(void)
{
--
2.17.1
