Hi Vlad, Paul,
On Thu, Jun 09, 2022 at 03:10:57PM +0200, Uladzislau Rezki wrote:
> On Tue, Jun 7, 2022 at 5:47 AM Paul E. McKenney <paulmck@xxxxxxxxxx> wrote:
> >
> > On Sun, Jun 05, 2022 at 11:10:31AM +0200, Uladzislau Rezki wrote:
> > > > On Thu, Jun 02, 2022 at 10:06:44AM +0200, Uladzislau Rezki (Sony) wrote:
> > > > > Currently the monitor work is scheduled with a fixed interval that
> > > > > is HZ/20 or each 50 milliseconds. The drawback of such approach is
> > > > > a low utilization of page slot in some scenarios. The page can store
> > > > > up to 512 records. For example on Android system it can look like:
> > > > >
> > > > > <snip>
> > > > > kworker/3:0-13872 [003] .... 11286.007048: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000026522604 nr_records=1
> > > > > kworker/3:0-13872 [003] .... 11286.015638: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000095ed6fca nr_records=2
> > > > > kworker/1:2-20434 [001] .... 11286.051230: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000044872ffd nr_records=1
> > > > > kworker/1:2-20434 [001] .... 11286.059322: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000026522604 nr_records=2
> > > > > kworker/0:1-20052 [000] .... 11286.095295: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000044872ffd nr_records=2
> > > > > kworker/0:1-20052 [000] .... 11286.103418: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000cbcf05db nr_records=1
> > > > > kworker/2:3-14372 [002] .... 11286.135155: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000095ed6fca nr_records=2
> > > > > kworker/2:3-14372 [002] .... 11286.135198: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000044872ffd nr_records=1
> > > > > kworker/1:2-20434 [001] .... 11286.155377: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000cbcf05db nr_records=5
> > > > > kworker/2:3-14372 [002] .... 11286.167181: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000026522604 nr_records=5
> > > > > kworker/1:2-20434 [001] .... 11286.179202: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x000000008ef95e14 nr_records=1
> > > > > kworker/2:3-14372 [002] .... 11286.187398: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000c597d297 nr_records=6
> > > > > kworker/3:0-13872 [003] .... 11286.187445: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000050bf92e2 nr_records=3
> > > > > kworker/1:2-20434 [001] .... 11286.198975: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000cbcf05db nr_records=4
> > > > > kworker/1:2-20434 [001] .... 11286.207203: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000095ed6fca nr_records=4
> > > > > <snip>
> > > > >
> > > > > where a page only carries few records to reclaim a memory. In order to
> > > > > improve batching and make utilization more efficient the patch introduces
> > > > > a drain interval that can be set either to KFREE_DRAIN_JIFFIES_MAX or
> > > > > KFREE_DRAIN_JIFFIES_MIN. It is adjusted if a flood is detected, in this
> > > > > case a memory reclaim occurs more often whereas in mostly idle cases the
> > > > > interval is set to its maximum timeout that improves the utilization of
> > > > > page slots.
> > > > >
> > > > > Signed-off-by: Uladzislau Rezki (Sony) <urezki@xxxxxxxxx>
> > > >
> > > > That does look like a problem well worth solving!
> > > >
> > > Agree, better ideas make better final solution :)
> > >
> > > >
> > > > But I am missing one thing. If we are having a callback flood, why do we
> > > > need a shorter timeout?
> > > >
> > > To offload faster, because otherwise we run into classical issue, it is a low
> > > memory condition state resulting in OOM.
> >
> > But doesn't each callback queued during the flood give us an opportunity
> > to react to the flood? That will be way more fine-grained than any
> > reasonable timer, right? Or am I missing something?
> >
> We can set the timer to zero or to current "jiffies" to initiate the
> offloading if the
> page is full. In that sense probably it make sense to propagate those two attr.
> to user space, so the user can configure min/max drain interval.
>
> Or we can only deal with fixed interval exposed via sysfs to control it by user.
> In that case we can get rid of MIN one and just trigger a timer if the page is
> full. I think this approach is better.
Yes I also think triggering timer with zero-timeout is better. Can you (Vlad)
accomplish that by just calling the timer callback inline, instead of queuing
a timer? I imagine you would just do queue_work() instead of
queue_delayed_work() in this scenario.
> > I do agree that the action would often need to be indirect to avoid the
> > memory-allocation-state hassles, but we already can do that, either via
> > an extremely short-term hrtimer or something like irq-work.
> >
> > > > Wouldn't a check on the number of blocks queued be simpler, more direct,
> > > > and provide faster response to the start of a callback flood?
> > > >
> > > I rely on krcp->count because not always we can store the pointer in the page
> > > slots. We can not allocate a page in the caller context thus we use page-cache
> > > worker that fills the cache in normal context. While it populates the cache,
> > > pointers temporary are queued to the linked-list.
> > >
> > > Any thoughts?
> >
> > There are a great many ways to approach this. One of them is to maintain
> > a per-CPU free-running counter of kvfree_rcu() calls, and to reset this
> > counter each jiffy.
> >
> > Or am I missing a trick here?
> >
> Do you mean to have a per-cpu timer that checks the per-cpu-freed counter
> and schedule the work when if it is needed? Or i have missed your point?
I think he (Paul) is describing the way 'flood detection' can work similar to how the
bypass list code is implemented. There he maintains a count which only if
exceeds a limit, will queue on to the bypass list.
This code:
// If we have advanced to a new jiffy, reset counts to allow
// moving back from ->nocb_bypass to ->cblist.
if (j == rdp->nocb_nobypass_last) {
c = rdp->nocb_nobypass_count + 1;
} else {
WRITE_ONCE(rdp->nocb_nobypass_last, j);
c = rdp->nocb_nobypass_count - nocb_nobypass_lim_per_jiffy;
if (ULONG_CMP_LT(rdp->nocb_nobypass_count,
nocb_nobypass_lim_per_jiffy))
c = 0;
else if (c > nocb_nobypass_lim_per_jiffy)
c = nocb_nobypass_lim_per_jiffy;
}
WRITE_ONCE(rdp->nocb_nobypass_count, c);
Your (Vlad's) approach OTOH is also fine to me, you check if page is full and
make that as a 'flood is happening' detector.
thanks,
- Joel
