On Tue, Jan 26, 2021 at 08:40:24PM -0800, Paul E. McKenney wrote:
> On Wed, Jan 27, 2021 at 10:42:35AM +0800, Boqun Feng wrote:
> > Hi Paul,
> >
> > On Tue, Jan 19, 2021 at 08:32:33PM -0800, paulmck@xxxxxxxxxx wrote:
> > > From: "Paul E. McKenney" <paulmck@xxxxxxxxxx>
> > >
> > > Historically, a task that has been subjected to RCU priority boosting is
> > > deboosted at rcu_read_unlock() time. However, with the advent of deferred
> > > quiescent states, if the outermost rcu_read_unlock() was invoked with
> > > either bottom halves, interrupts, or preemption disabled, the deboosting
> > > will be delayed for some time. During this time, a low-priority process
> > > might be incorrectly running at a high real-time priority level.
> > >
> > > Fortunately, rcu_read_unlock_special() already provides mechanisms for
> > > forcing a minimal deferral of quiescent states, at least for kernels
> > > built with CONFIG_IRQ_WORK=y. These mechanisms are currently used
> > > when expedited grace periods are pending that might be blocked by the
> > > current task. This commit therefore causes those mechanisms to also be
> > > used in cases where the current task has been or might soon be subjected
> > > to RCU priority boosting. Note that this applies to all kernels built
> > > with CONFIG_RCU_BOOST=y, regardless of whether or not they are also
> > > built with CONFIG_PREEMPT_RT=y.
> > >
> > > This approach assumes that kernels build for use with aggressive real-time
> > > applications are built with CONFIG_IRQ_WORK=y. It is likely to be far
> > > simpler to enable CONFIG_IRQ_WORK=y than to implement a fast-deboosting
> > > scheme that works correctly in its absence.
> > >
> > > While in the area, alphabetize the rcu_preempt_deferred_qs_handler()
> > > function's local variables.
> > >
> > > Cc: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
> > > Cc: Scott Wood <swood@xxxxxxxxxx>
> > > Cc: Lai Jiangshan <jiangshanlai@xxxxxxxxx>
> > > Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
> > > Signed-off-by: Paul E. McKenney <paulmck@xxxxxxxxxx>
> > > ---
> > > kernel/rcu/tree_plugin.h | 26 ++++++++++++++------------
> > > 1 file changed, 14 insertions(+), 12 deletions(-)
> > >
> > > diff --git a/kernel/rcu/tree_plugin.h b/kernel/rcu/tree_plugin.h
> > > index 8b0feb2..fca31c6 100644
> > > --- a/kernel/rcu/tree_plugin.h
> > > +++ b/kernel/rcu/tree_plugin.h
> > > @@ -660,9 +660,9 @@ static void rcu_preempt_deferred_qs_handler(struct irq_work *iwp)
> > > static void rcu_read_unlock_special(struct task_struct *t)
> > > {
> > > unsigned long flags;
> > > + bool irqs_were_disabled;
> > > bool preempt_bh_were_disabled =
> > > !!(preempt_count() & (PREEMPT_MASK | SOFTIRQ_MASK));
> > > - bool irqs_were_disabled;
> > >
> > > /* NMI handlers cannot block and cannot safely manipulate state. */
> > > if (in_nmi())
> > > @@ -671,30 +671,32 @@ static void rcu_read_unlock_special(struct task_struct *t)
> > > local_irq_save(flags);
> > > irqs_were_disabled = irqs_disabled_flags(flags);
> > > if (preempt_bh_were_disabled || irqs_were_disabled) {
> > > - bool exp;
> > > + bool expboost; // Expedited GP in flight or possible boosting.
> > > struct rcu_data *rdp = this_cpu_ptr(&rcu_data);
> > > struct rcu_node *rnp = rdp->mynode;
> > >
> > > - exp = (t->rcu_blocked_node &&
> > > - READ_ONCE(t->rcu_blocked_node->exp_tasks)) ||
> > > - (rdp->grpmask & READ_ONCE(rnp->expmask));
> > > + expboost = (t->rcu_blocked_node && READ_ONCE(t->rcu_blocked_node->exp_tasks)) ||
> > > + (rdp->grpmask & READ_ONCE(rnp->expmask)) ||
> > > + (IS_ENABLED(CONFIG_RCU_BOOST) && irqs_were_disabled &&
> > > + t->rcu_blocked_node);
> >
> > I take it that you check whether possible boosting is in progress via
> > the last expression of "||", ie:
> >
> > (IS_ENABLED(CONFIG_RCU_BOOST) && irqs_were_disabled &&
> > t->rcu_blocked_node)
> >
> > if so, I don't see the point of using the new "expboost" in the
> > raise_softirq_irqoff() branch, because if in_irq() is false, we only
> > raise softirq if irqs_were_disabled is false (otherwise, we may take the
> > risk of doing a wakeup with a pi or rq lock held, IIRC), and the
> > boosting part of the "expboost" above is only true if irqs_were_disabled
> > is true, so using expboost makes no different here.
>
> I started out with two local variables, one for each side of the ||,
> but this looked nicer.
>
> > > // Need to defer quiescent state until everything is enabled.
> > > - if (use_softirq && (in_irq() || (exp && !irqs_were_disabled))) {
> > > + if (use_softirq && (in_irq() || (expboost && !irqs_were_disabled))) {
> > > // Using softirq, safe to awaken, and either the
> > > - // wakeup is free or there is an expedited GP.
> > > + // wakeup is free or there is either an expedited
> > > + // GP in flight or a potential need to deboost.
> >
> > and this comment will be incorrect, we won't enter here solely because
> > there is a potential need to deboost.
>
> You are quite right, given the !irqs_were_disabled.
>
> > That said, why the boosting condition has a "irqs_were_disabled" in it?
> > What if a task gets boosted because of RCU boosting, and exit the RCU
> > read-side c.s. with irq enabled and there is no expedited GP in flight,
> > will the task get deboosted quickly enough?
>
> Because if !irqs_were_disabled, there will be a local_bh_enable() or
> a preempt_enable(), give or take preempt_enable_no_resched(), and those
> will both get the scheduler involved because of the set_tsk_need_resched()
> and set_preempt_need_resched(). There is thus no need for the irq_work
> unless irqs_were_disabled.
>
But if so, shouldn't we check !preemp_bh_were_disabled instead of
irqs_were_disabled? I.e. there is no need for the irq_work unless
preemption and bottom halves are all enabled (IOW, we cannot expect the
task to get into scheduler soon via *_enable()).
Current what we are doing is if irqs_were_disabled is true (along with
other checks pass), we queue a irq work, but in this situation,
preept_bh_were_disabled might be true as well, which means there may be
a preempt_enable() not far away.
Consider the following simple example, if we have a in-flight gp or
this task has been boosted:
preempt_disable();
local_irq_disable();
rcu_read_lock();
...
rcu_read_unlock();
// current we will queue a irq work here.
local_irq_enable();
preempt_enable();
// but we will enter scheduelr here./
> I am not all that worried about preempt_enable_no_resched() because
> it is a problem for RT even in the absence of RCU priority boosting.
> And the current uses appear to be in things that one would not use while
> running an RT workload.
>
> > Maybe I'm missing some subtle?
>
> Or maybe I am. Thoughts?
>
> Thanx, Paul
>
> > Regards,
> > Boqun
> >
> > > raise_softirq_irqoff(RCU_SOFTIRQ);
> > > } else {
> > > // Enabling BH or preempt does reschedule, so...
> > > - // Also if no expediting, slow is OK.
> > > - // Plus nohz_full CPUs eventually get tick enabled.
> > > + // Also if no expediting and no possible deboosting,
> > > + // slow is OK. Plus nohz_full CPUs eventually get
> > > + // tick enabled.
> > > set_tsk_need_resched(current);
> > > set_preempt_need_resched();
> > > if (IS_ENABLED(CONFIG_IRQ_WORK) && irqs_were_disabled &&
so the irqs_were_disabled here should be !preempt_bh_were_disabled?
Regards,
Boqun
> > > - !rdp->defer_qs_iw_pending && exp && cpu_online(rdp->cpu)) {
> > > + expboost && !rdp->defer_qs_iw_pending && cpu_online(rdp->cpu)) {
> > > // Get scheduler to re-evaluate and call hooks.
> > > // If !IRQ_WORK, FQS scan will eventually IPI.
> > > - init_irq_work(&rdp->defer_qs_iw,
> > > - rcu_preempt_deferred_qs_handler);
> > > + init_irq_work(&rdp->defer_qs_iw, rcu_preempt_deferred_qs_handler);
> > > rdp->defer_qs_iw_pending = true;
> > > irq_work_queue_on(&rdp->defer_qs_iw, rdp->cpu);
> > > }
> > > --
> > > 2.9.5
> > >
