[PATCH v4 5/5] md/raid10: Atomic write support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Set BLK_FEAT_ATOMIC_WRITES_STACKED to enable atomic writes.

For an attempt to atomic write to a region which has bad blocks, error
the write as we just cannot do this. It is unlikely to find devices which
support atomic writes and bad blocks.

Signed-off-by: John Garry <john.g.garry@xxxxxxxxxx>
---
 drivers/md/raid10.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 8c7f5daa073a..a3936a67e1e8 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1255,6 +1255,7 @@ static void raid10_write_one_disk(struct mddev *mddev, struct r10bio *r10_bio,
 	const enum req_op op = bio_op(bio);
 	const blk_opf_t do_sync = bio->bi_opf & REQ_SYNC;
 	const blk_opf_t do_fua = bio->bi_opf & REQ_FUA;
+	const blk_opf_t do_atomic = bio->bi_opf & REQ_ATOMIC;
 	unsigned long flags;
 	struct r10conf *conf = mddev->private;
 	struct md_rdev *rdev;
@@ -1273,7 +1274,7 @@ static void raid10_write_one_disk(struct mddev *mddev, struct r10bio *r10_bio,
 	mbio->bi_iter.bi_sector	= (r10_bio->devs[n_copy].addr +
 				   choose_data_offset(r10_bio, rdev));
 	mbio->bi_end_io	= raid10_end_write_request;
-	mbio->bi_opf = op | do_sync | do_fua;
+	mbio->bi_opf = op | do_sync | do_fua | do_atomic;
 	if (!replacement && test_bit(FailFast,
 				     &conf->mirrors[devnum].rdev->flags)
 			 && enough(conf, devnum))
@@ -1468,7 +1469,15 @@ static void raid10_write_request(struct mddev *mddev, struct bio *bio,
 				continue;
 			}
 			if (is_bad) {
-				int good_sectors = first_bad - dev_sector;
+				int good_sectors;
+
+				if (bio->bi_opf & REQ_ATOMIC) {
+					/* We just cannot atomically write this ... */
+					error = -EFAULT;
+					goto err_handle;
+				}
+
+				good_sectors = first_bad - dev_sector;
 				if (good_sectors < max_sectors)
 					max_sectors = good_sectors;
 			}
@@ -4025,6 +4034,7 @@ static int raid10_set_queue_limits(struct mddev *mddev)
 	lim.max_write_zeroes_sectors = 0;
 	lim.io_min = mddev->chunk_sectors << 9;
 	lim.io_opt = lim.io_min * raid10_nr_stripes(conf);
+	lim.features |= BLK_FEAT_ATOMIC_WRITES_STACKED;
 	err = mddev_stack_rdev_limits(mddev, &lim, MDDEV_STACK_INTEGRITY);
 	if (err) {
 		queue_limits_cancel_update(mddev->gendisk->queue);
-- 
2.31.1





[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux