Re: [PATCH v2 4/5] md/raid1: Atomic write support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

在 2024/10/30 17:49, John Garry 写道:
Set BLK_FEAT_ATOMIC_WRITES_STACKED to enable atomic writes.

For an attempt to atomic write to a region which has bad blocks, error
the write as we just cannot do this. It is unlikely to find devices which
support atomic writes and bad blocks.

Signed-off-by: John Garry <john.g.garry@xxxxxxxxxx>
---
  drivers/md/raid1.c | 8 ++++++++
  1 file changed, 8 insertions(+)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index a10018282629..b57f69e3e8a7 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1524,6 +1524,13 @@ static void raid1_write_request(struct mddev *mddev, struct bio *bio,
  				blocked_rdev = rdev;
  				break;
  			}
+
+			if (is_bad && bio->bi_opf & REQ_ATOMIC) {
+				/* We just cannot atomically write this ... */
+				error = -EFAULT;
+				goto err_handle;
+			}

One nit here. If the write range are all badblocks, then this rdev is
skipped, and bio won't be splited, so I think atomic write is still fine
in this case. Perhaps move this conditon below?

Same for raid10.

Thanks,
Kuai

+
  			if (is_bad && first_bad <= r1_bio->sector) {
  				/* Cannot write here at all */
  				bad_sectors -= (r1_bio->sector - first_bad);
@@ -3220,6 +3227,7 @@ static int raid1_set_limits(struct mddev *mddev)
md_init_stacking_limits(&lim);
  	lim.max_write_zeroes_sectors = 0;
+	lim.features |= BLK_FEAT_ATOMIC_WRITES_STACKED;
  	err = mddev_stack_rdev_limits(mddev, &lim, MDDEV_STACK_INTEGRITY);
  	if (err) {
  		queue_limits_cancel_update(mddev->gendisk->queue);






[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux