W dniu 18.09.2024 o 17:40, Dragan Milivojević pisze:
I have noticed a lot of this type of stuff in dmesg, repeating every 5
minutes or so:
[ 1212.352770] sd 3:0:4:0: [sde] tag#3885 CDB: ATA command pass
through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 1212.353063] sd 3:0:4:0: [sde] tag#3885 CDB: ATA command pass
through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 1212.353077] mpt2sas_cm0: sas_address(0x4433221104000000), phy(4)
[ 1212.353084] mpt2sas_cm0: enclosure logical id(0x500062b200d564c0), slot(4)
[ 1212.353090] mpt2sas_cm0: handle(0x0015),
ioc_status(success)(0x0000), smid(3886)
[ 1212.353096] mpt2sas_cm0: request_len(0), underflow(0), resid(0)
[ 1212.353101] mpt2sas_cm0: tag(0), transfer_count(0),
sc->result(0x00000002)
[ 1212.353105] mpt2sas_cm0: scsi_status(check condition)(0x02),
scsi_state(autosense valid )(0x01)
[ 1212.353110] mpt2sas_cm0: [sense_key,asc,ascq]:
[0x01,0x00,0x1d], count(22)
[ 1212.353248] sd 3:0:9:0: [sdj] tag#3886 CDB: ATA command pass
ATA command pass through is usually from smart monitoring tools but
this looks more like drive resets. Cables maybe?
We had similar problem with disk reset.
In our situation problem was with power. When array started check or
rebuild disk power consumption went up and circuit on the board doesn't
have enough capacity.
--
---
Regards,
Adam Nieścierowicz
begin:vcard
fn;quoted-printable:Adam Nie=C5=9Bcierowicz
n;quoted-printable:Nie=C5=9Bcierowicz;Adam
email;internet:adam.niescierowicz@xxxxxxxxxx
x-mozilla-html:TRUE
version:2.1
end:vcard
