Hi,
在 2024/08/28 9:31, Xiao Ni 写道:
On Wed, Aug 28, 2024 at 9:15 AM Yu Kuai <yukuai1@xxxxxxxxxxxxxxx> wrote:
Hi,
在 2024/08/28 4:32, Song Liu 写道:
On Mon, Aug 26, 2024 at 12:50 AM Yu Kuai <yukuai1@xxxxxxxxxxxxxxx> wrote:
[...]
And with this we can build bitmap as kernel module, but that's not
our concern for now.
This version was tested with mdadm tests. There are still few failed
tests in my VM, howerver, it's the test itself need to be fixed and
we're working on it.
Do we have new test failures after this set? If so, which ones?
No, there are new failures.
Hi all
I suggest running lvm2 regression tests too. I can't run it myself now
because I can't get a stable network connection all the time.
Today, I run one round of the lvm2 tests with following script in my VM:
for t in `ls test/shell`; do
if cat test/shell/$t | grep raid &> /dev/null; then
make check T=shell/$t
fi
done
And the failed tests are:
[root@fedora lvm2]# cat log1 | grep "### " | grep failed
### failed: [ndev-vanilla] shell/lvconvert-raid-reshape-size.sh
### failed: [ndev-vanilla] shell/lvconvert-repair-raid.sh
Then, I revert this set and test above tests again, they still fail. So
I didn't dig into these tests. :)
Thanks,
Kuai
Best Regards
Xiao
Thanks,
Kuai
Thanks,
Song
Yu Kuai (42):
md/raid1: use md_bitmap_wait_behind_writes() in raid1_read_request()
md/md-bitmap: replace md_bitmap_status() with a new helper
md_bitmap_get_stats()
[...]
.
.
