[PATCH 3/5] Add key ENCRYPTION_NO_VERIFY to conf

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add ENCRYPTION_NO_VERIFY config key and allow to disable
checking encryption status for given type of drives.

The key is introduced because of SATA Opal disks for which
TPM commands must be enabled in libata kernel module,
(libata.allow_tpm=1), otherwise it is impossible to verify
encryption status. TPM commands are disabled by default.

Currently the key only supports the "sata_opal" value,
if necessary, the functionality is ready to support more types of disks.

Signed-off-by: Blazej Kucman <blazej.kucman@xxxxxxxxx>
---
 config.c           | 25 ++++++++++++++++++++++++-
 drive_encryption.c | 16 ++++++++++++----
 mdadm.conf.5.in    | 13 +++++++++++++
 mdadm.h            |  1 +
 4 files changed, 50 insertions(+), 5 deletions(-)

diff --git a/config.c b/config.c
index 44f7dd2f..b46d71cb 100644
--- a/config.c
+++ b/config.c
@@ -81,7 +81,7 @@ char DefaultAltConfDir[] = CONFFILE2 ".d";
 
 enum linetype { Devices, Array, Mailaddr, Mailfrom, Program, CreateDev,
 		Homehost, HomeCluster, AutoMode, Policy, PartPolicy, Sysfs,
-		MonitorDelay, LTEnd };
+		MonitorDelay, EncryptionNoVerify, LTEnd };
 char *keywords[] = {
 	[Devices]  = "devices",
 	[Array]    = "array",
@@ -96,6 +96,7 @@ char *keywords[] = {
 	[PartPolicy]="part-policy",
 	[Sysfs]    = "sysfs",
 	[MonitorDelay] = "monitordelay",
+	[EncryptionNoVerify] = "ENCRYPTION_NO_VERIFY",
 	[LTEnd]    = NULL
 };
 
@@ -729,6 +730,19 @@ void monitordelayline(char *line)
 	}
 }
 
+static bool sata_opal_encryption_no_verify;
+void encryption_no_verify_line(char *line)
+{
+	char *word;
+
+	for (word = dl_next(line); word != line; word = dl_next(word)) {
+		if (strcasecmp(word, "sata_opal") == 0)
+			sata_opal_encryption_no_verify = true;
+		else
+			pr_err("unrecognised word on ENCRYPTION_NO_VERIFY line: %s\n", word);
+	}
+}
+
 char auto_yes[] = "yes";
 char auto_no[] = "no";
 char auto_homehost[] = "homehost";
@@ -913,6 +927,9 @@ void conf_file(FILE *f)
 		case MonitorDelay:
 			monitordelayline(line);
 			break;
+		case EncryptionNoVerify:
+			encryption_no_verify_line(line);
+			break;
 		default:
 			pr_err("Unknown keyword %s\n", line);
 		}
@@ -1075,6 +1092,12 @@ int conf_get_monitor_delay(void)
 	return monitor_delay;
 }
 
+bool conf_get_sata_opal_encryption_no_verify(void)
+{
+	load_conffile();
+	return sata_opal_encryption_no_verify;
+}
+
 struct createinfo *conf_get_create_info(void)
 {
 	load_conffile();
diff --git a/drive_encryption.c b/drive_encryption.c
index 8421e374..5b9cdc00 100644
--- a/drive_encryption.c
+++ b/drive_encryption.c
@@ -656,10 +656,18 @@ get_ata_encryption_information(int disk_fd, struct encryption_information *infor
 	if (status == MDADM_STATUS_ERROR)
 		return MDADM_STATUS_ERROR;
 
-	if (is_ata_trusted_computing_supported(buffer_identify) &&
-	    !sysfs_is_libata_allow_tpm_enabled(verbose)) {
-		pr_vrb("For SATA with Trusted Computing support, required libata.tpm_enabled=1.\n");
-		return MDADM_STATUS_ERROR;
+	/* Possible OPAL support, further checks require tpm_enabled.*/
+	if (is_ata_trusted_computing_supported(buffer_identify)) {
+		/* OPAL SATA encryption checking disabled. */
+		if (conf_get_sata_opal_encryption_no_verify())
+			return MDADM_STATUS_SUCCESS;
+
+		if (!sysfs_is_libata_allow_tpm_enabled(verbose)) {
+			pr_vrb("Detected SATA drive /dev/%s with Trusted Computing support.\n",
+			       fd2kname(disk_fd));
+			pr_vrb("Cannot verify encryption state. Required libata.tpm_enabled=1.\n");
+			return MDADM_STATUS_ERROR;
+		}
 	}
 
 	ata_opal_status = is_ata_opal(disk_fd, buffer_identify, verbose);
diff --git a/mdadm.conf.5.in b/mdadm.conf.5.in
index 787e51e9..afb0a296 100644
--- a/mdadm.conf.5.in
+++ b/mdadm.conf.5.in
@@ -636,6 +636,17 @@ If multiple
 .B MINITORDELAY
 lines are provided, only first non-zero value is considered.
 
+.TP
+.B ENCRYPTION_NO_VERIFY
+The
+.B ENCRYPTION_NO_VERIFY
+disables encryption verification for devices with particular encryption support detected.
+Currently, only verification of SATA OPAL encryption can be disabled.
+It does not disable ATA security encryption verification.
+Available parameter
+.I "sata_opal".
+
+
 .SH FILES
 
 .SS {CONFFILE}
@@ -744,6 +755,8 @@ SYSFS uuid=bead5eb6:31c17a27:da120ba2:7dfda40d group_thread_cnt=4
 sync_speed_max=1000000
 .br
 MONITORDELAY 60
+.br
+ENCRYPTION_NO_VERIFY sata_opal
 
 .SH SEE ALSO
 .BR mdadm (8),
diff --git a/mdadm.h b/mdadm.h
index f64bb783..9d98693b 100644
--- a/mdadm.h
+++ b/mdadm.h
@@ -1673,6 +1673,7 @@ extern char *conf_get_program(void);
 extern char *conf_get_homehost(int *require_homehostp);
 extern char *conf_get_homecluster(void);
 extern int conf_get_monitor_delay(void);
+extern bool conf_get_sata_opal_encryption_no_verify(void);
 extern char *conf_line(FILE *file);
 extern char *conf_word(FILE *file, int allow_key);
 extern void print_quoted(char *str);
-- 
2.35.3





[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux