[PATCH] restripe.c: Use _FILE_OFFSET_BITS to enable largefile support

[Khem Raj <raj.khem@xxxxxxxxx>]

Instead of using the lseek64 and friends, its better to enable it via
the feature macro _FILE_OFFSET_BITS = 64 and let the C library deal with
the width of types

Signed-off-by: Khem Raj <raj.khem@xxxxxxxxx>
---
 restripe.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

--- a/restripe.c
+++ b/restripe.c
@@ -22,6 +22,9 @@
  *    Email: <neilb@xxxxxxx>
  */
 
+/* Enable largefile support */
+#define _FILE_OFFSET_BITS 64
+
 #include "mdadm.h"
 #include <stdint.h>
 
@@ -581,7 +584,7 @@ int save_stripes(int *source, unsigned l
 				       raid_disks, level, layout);
 			if (dnum < 0) abort();
 			if (source[dnum] < 0 ||
-			    lseek64(source[dnum],
+			    lseek(source[dnum],
 				    offsets[dnum] + offset, 0) < 0 ||
 			    read(source[dnum], buf+disk * chunk_size,
 				 chunk_size) != chunk_size) {
@@ -754,8 +757,8 @@ int restore_stripes(int *dest, unsigned
 					   raid_disks, level, layout);
 			if (src_buf == NULL) {
 				/* read from file */
-				if (lseek64(source, read_offset, 0) !=
-					 (off64_t)read_offset) {
+				if (lseek(source, read_offset, 0) !=
+					 (off_t)read_offset) {
 					rv = -1;
 					goto abort;
 				}
@@ -816,7 +819,7 @@ int restore_stripes(int *dest, unsigned
 		}
 		for (i=0; i < raid_disks ; i++)
 			if (dest[i] >= 0) {
-				if (lseek64(dest[i],
+				if (lseek(dest[i],
 					 offsets[i]+offset, 0) < 0) {
 					rv = -1;
 					goto abort;
@@ -866,7 +869,7 @@ int test_stripes(int *source, unsigned l
 		int disk;
 
 		for (i = 0 ; i < raid_disks ; i++) {
-			if ((lseek64(source[i], offsets[i]+start, 0) < 0) ||
+			if ((lseek(source[i], offsets[i]+start, 0) < 0) ||
 			    (read(source[i], stripes[i], chunk_size) !=
 			     chunk_size)) {
 				free(q);
--- a/raid6check.c
+++ b/raid6check.c
@@ -22,6 +22,9 @@
  *    Based on "restripe.c" from "mdadm" codebase
  */
 
+/* Enable largefile support */
+#define _FILE_OFFSET_BITS 64
+
 #include "mdadm.h"
 #include <stdint.h>
 #include <signal.h>
@@ -279,9 +282,9 @@ int manual_repair(int chunk_size, int sy
 	}
 
 	int write_res1, write_res2;
-	off64_t seek_res;
+	off_t seek_res;
 
-	seek_res = lseek64(source[fd1],
+	seek_res = lseek(source[fd1],
 			   offsets[fd1] + start * chunk_size, SEEK_SET);
 	if (seek_res < 0) {
 		fprintf(stderr, "lseek failed for failed_disk1\n");
@@ -289,7 +292,7 @@ int manual_repair(int chunk_size, int sy
 	}
 	write_res1 = write(source[fd1], blocks[failed_slot1], chunk_size);
 
-	seek_res = lseek64(source[fd2],
+	seek_res = lseek(source[fd2],
 			   offsets[fd2] + start * chunk_size, SEEK_SET);
 	if (seek_res < 0) {
 		fprintf(stderr, "lseek failed for failed_disk2\n");
@@ -374,7 +377,7 @@ int check_stripes(struct mdinfo *info, i
 			goto exitCheck;
 		}
 		for (i = 0 ; i < raid_disks ; i++) {
-			off64_t seek_res = lseek64(source[i], offsets[i] + start * chunk_size,
+			off_t seek_res = lseek(source[i], offsets[i] + start * chunk_size,
 						   SEEK_SET);
 			if (seek_res < 0) {
 				fprintf(stderr, "lseek to source %d failed\n", i);
--- a/swap_super.c
+++ b/swap_super.c
@@ -1,3 +1,6 @@
+/* Enable largefile support */
+#define _FILE_OFFSET_BITS 64
+
 #include <unistd.h>
 #include <stdlib.h>
 #include <fcntl.h>
@@ -16,8 +19,6 @@
 
 #define MD_NEW_SIZE_SECTORS(x)		((x & ~(MD_RESERVED_SECTORS - 1)) - MD_RESERVED_SECTORS)
 
-extern long long lseek64(int, long long, int);
-
 int main(int argc, char *argv[])
 {
 	int fd, i;
@@ -38,8 +39,8 @@ int main(int argc, char *argv[])
 		exit(1);
 	}
 	offset = MD_NEW_SIZE_SECTORS(size) * 512LL;
-	if (lseek64(fd, offset, 0) < 0LL) {
-		perror("lseek64");
+	if (lseek(fd, offset, 0) < 0LL) {
+		perror("lseek");
 		exit(1);
 	}
 	if (read(fd, super, 4096) != 4096) {
@@ -68,8 +69,8 @@ int main(int argc, char *argv[])
 		super[32*4+10*4 +i] = t;
 	}
 
-	if (lseek64(fd, offset, 0) < 0LL) {
-		perror("lseek64");
+	if (lseek(fd, offset, 0) < 0LL) {
+		perror("lseek");
 		exit(1);
 	}
 	if (write(fd, super, 4096) != 4096) {