Re: [PATCH v5 09/14] dm-raid: really frozen sync_thread during suspend

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Feb 18, 2024 at 2:34 PM Yu Kuai <yukuai1@xxxxxxxxxxxxxxx> wrote:
>
> Hi,
>
> 在 2024/02/18 12:53, Xiao Ni 写道:
> > Hi Kuai
> >
> > On Thu, Feb 1, 2024 at 5:30 PM Yu Kuai <yukuai1@xxxxxxxxxxxxxxx> wrote:
> >>
> >> From: Yu Kuai <yukuai3@xxxxxxxxxx>
> >>
> >> 1) The flag MD_RECOVERY_FROZEN doesn't mean that sync thread is frozen,
> >>     it only prevent new sync_thread to start, and it can't stop the
> >>     running sync thread;
> >
> > Agree with this
> >
> >> 2) The flag MD_RECOVERY_FROZEN doesn't mean that writes are stopped, use
> >>     it as condition for md_stop_writes() in raid_postsuspend() doesn't
> >>     look correct.
> >
> > I don't agree with it. __md_stop_writes stops sync thread, so it needs
> > to check this flag. And It looks like the name __md_stop_writes is not
> > right. Does it really stop write io? mddev_suspend should be the
> > function that stop write request. From my understanding,
> > raid_postsuspend does two jobs. One is stopping sync thread. Two is
> > suspending array.
>
> MD_RECOVERY_FROZEN is not just used in __md_stop_writes(), so I think
> it's not correct to to check this. For example, if MD_RECOVERY_FROZEN is
> set by raid_message(), then __md_stop_writes() will be skipped.

Hi Kuai

raid_message sets MD_RECOVERY_FROZEN and it stops the sync thread
synchronously. So it doesn't need __md_stop_writes. So from md and
dmraid, it has a rule. If you set MD_RECOVERY_FROZEN, you're in the
process of stopping sync thread.

>
> >
> >> 3) raid_message can set/clear the flag MD_RECOVERY_FROZEN at anytime,
> >>     and if MD_RECOVERY_FROZEN is cleared while the array is suspended,
> >>     new sync_thread can start unexpected.
> >
> > md_action_store doesn't check this either. If the array is suspended
> > and MD_RECOVERY_FROZEN is cleared, before patch01, sync thread can't
> > happen. So it looks like patch01 breaks the logic.
>
> The difference is that md/raid doen't need to frozen sync_thread while
> suspending the array for now. And I don't understand at all why sync
> thread can't happed before patch01.

There is a condition you mentioned above -- the array is suspended.
Before patch01, if one array is suspended, the sync thread can't
happen. Even raid_messages clears MD_RECOVERY_FROZEN, the sync thread
can't start. After resume the array, the sync thread can start again.

Regards
Xiao
>
> Thanks,
> Kuai
>
> >
> > Regards
> > Xiao
> >
> >
> >>
> >> Fix above problems by using the new helper to suspend the array during
> >> suspend, also disallow raid_message() to change sync_thread status
> >> during suspend.
> >>
> >> Note that after commit f52f5c71f3d4 ("md: fix stopping sync thread"), the
> >> test shell/lvconvert-raid-reshape.sh start to hang in stop_sync_thread(),
> >> and with previous fixes, the test won't hang there anymore, however, the
> >> test will still fail and complain that ext4 is corrupted. And with this
> >> patch, the test won't hang due to stop_sync_thread() or fail due to ext4
> >> is corrupted anymore. However, there is still a deadlock related to
> >> dm-raid456 that will be fixed in following patches.
> >>
> >> Reported-by: Mikulas Patocka <mpatocka@xxxxxxxxxx>
> >> Closes: https://lore.kernel.org/all/e5e8afe2-e9a8-49a2-5ab0-958d4065c55e@xxxxxxxxxx/
> >> Fixes: 1af2048a3e87 ("dm raid: fix deadlock caused by premature md_stop_writes()")
> >> Fixes: 9dbd1aa3a81c ("dm raid: add reshaping support to the target")
> >> Fixes: f52f5c71f3d4 ("md: fix stopping sync thread")
> >> Signed-off-by: Yu Kuai <yukuai3@xxxxxxxxxx>
> >> ---
> >>   drivers/md/dm-raid.c | 38 +++++++++++++++++++++++++++++---------
> >>   1 file changed, 29 insertions(+), 9 deletions(-)
> >>
> >> diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
> >> index eb009d6bb03a..5ce3c6020b1b 100644
> >> --- a/drivers/md/dm-raid.c
> >> +++ b/drivers/md/dm-raid.c
> >> @@ -3240,11 +3240,12 @@ static int raid_ctr(struct dm_target *ti, unsigned int argc, char **argv)
> >>          rs->md.ro = 1;
> >>          rs->md.in_sync = 1;
> >>
> >> -       /* Keep array frozen until resume. */
> >> -       set_bit(MD_RECOVERY_FROZEN, &rs->md.recovery);
> >> -
> >>          /* Has to be held on running the array */
> >>          mddev_suspend_and_lock_nointr(&rs->md);
> >> +
> >> +       /* Keep array frozen until resume. */
> >> +       md_frozen_sync_thread(&rs->md);
> >> +
> >>          r = md_run(&rs->md);
> >>          rs->md.in_sync = 0; /* Assume already marked dirty */
> >>          if (r) {
> >> @@ -3722,6 +3723,9 @@ static int raid_message(struct dm_target *ti, unsigned int argc, char **argv,
> >>          if (!mddev->pers || !mddev->pers->sync_request)
> >>                  return -EINVAL;
> >>
> >> +       if (test_bit(RT_FLAG_RS_SUSPENDED, &rs->runtime_flags))
> >> +               return -EBUSY;
> >> +
> >>          if (!strcasecmp(argv[0], "frozen"))
> >>                  set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
> >>          else
> >> @@ -3791,15 +3795,31 @@ static void raid_io_hints(struct dm_target *ti, struct queue_limits *limits)
> >>          blk_limits_io_opt(limits, chunk_size_bytes * mddev_data_stripes(rs));
> >>   }
> >>
> >> +static void raid_presuspend(struct dm_target *ti)
> >> +{
> >> +       struct raid_set *rs = ti->private;
> >> +
> >> +       mddev_lock_nointr(&rs->md);
> >> +       md_frozen_sync_thread(&rs->md);
> >> +       mddev_unlock(&rs->md);
> >> +}
> >> +
> >> +static void raid_presuspend_undo(struct dm_target *ti)
> >> +{
> >> +       struct raid_set *rs = ti->private;
> >> +
> >> +       mddev_lock_nointr(&rs->md);
> >> +       md_unfrozen_sync_thread(&rs->md);
> >> +       mddev_unlock(&rs->md);
> >> +}
> >> +
> >>   static void raid_postsuspend(struct dm_target *ti)
> >>   {
> >>          struct raid_set *rs = ti->private;
> >>
> >>          if (!test_and_set_bit(RT_FLAG_RS_SUSPENDED, &rs->runtime_flags)) {
> >>                  /* Writes have to be stopped before suspending to avoid deadlocks. */
> >> -               if (!test_bit(MD_RECOVERY_FROZEN, &rs->md.recovery))
> >> -                       md_stop_writes(&rs->md);
> >> -
> >> +               md_stop_writes(&rs->md);
> >>                  mddev_suspend(&rs->md, false);
> >>          }
> >>   }
> >> @@ -4012,8 +4032,6 @@ static int raid_preresume(struct dm_target *ti)
> >>          }
> >>
> >>          /* Check for any resize/reshape on @rs and adjust/initiate */
> >> -       /* Be prepared for mddev_resume() in raid_resume() */
> >> -       set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
> >>          if (mddev->recovery_cp && mddev->recovery_cp < MaxSector) {
> >>                  set_bit(MD_RECOVERY_REQUESTED, &mddev->recovery);
> >>                  mddev->resync_min = mddev->recovery_cp;
> >> @@ -4056,9 +4074,9 @@ static void raid_resume(struct dm_target *ti)
> >>                          rs_set_capacity(rs);
> >>
> >>                  mddev_lock_nointr(mddev);
> >> -               clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
> >>                  mddev->ro = 0;
> >>                  mddev->in_sync = 0;
> >> +               md_unfrozen_sync_thread(mddev);
> >>                  mddev_unlock_and_resume(mddev);
> >>          }
> >>   }
> >> @@ -4074,6 +4092,8 @@ static struct target_type raid_target = {
> >>          .message = raid_message,
> >>          .iterate_devices = raid_iterate_devices,
> >>          .io_hints = raid_io_hints,
> >> +       .presuspend = raid_presuspend,
> >> +       .presuspend_undo = raid_presuspend_undo,
> >>          .postsuspend = raid_postsuspend,
> >>          .preresume = raid_preresume,
> >>          .resume = raid_resume,
> >> --
> >> 2.39.2
> >>
> >
> > .
> >
>






[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux