Re: [PATCH v5 01/14] md: don't ignore suspended array in md_check_recovery()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

在 2024/02/18 16:07, Xiao Ni 写道:
On Sun, Feb 18, 2024 at 2:22 PM Yu Kuai <yukuai1@xxxxxxxxxxxxxxx> wrote:

Hi,

在 2024/02/18 13:07, Xiao Ni 写道:
On Sun, Feb 18, 2024 at 11:24 AM Yu Kuai <yukuai1@xxxxxxxxxxxxxxx> wrote:

Hi,

在 2024/02/18 11:15, Xiao Ni 写道:
On Sun, Feb 18, 2024 at 10:34 AM Yu Kuai <yukuai1@xxxxxxxxxxxxxxx> wrote:

Hi,

在 2024/02/18 10:27, Xiao Ni 写道:
On Sun, Feb 18, 2024 at 9:46 AM Yu Kuai <yukuai1@xxxxxxxxxxxxxxx> wrote:

Hi,

在 2024/02/18 9:33, Xiao Ni 写道:
The deadlock problem mentioned in this patch should not be right?

No, I think it's right. Looks like you are expecting other problems,
like mentioned in patch 6, to be fixed by this patch.

Hi Kuai

Could you explain why step1 and step2 from this comment can happen
simultaneously? From the log, the process should be
The process is :
dev_remove->dm_destroy->__dm_destroy->dm_table_postsuspend_targets(raid_postsuspend)
-> dm_table_destroy(raid_dtr).
After suspending the array, it calls raid_dtr. So these two functions
can't happen simultaneously.

You're removing the target directly, however, dm can suspend the disk
directly, you can simplily:

1) dmsetup suspend xxx
2) dmsetup remove xxx

For dm-raid, the design of suspend stops sync thread first and then it
calls mddev_suspend to suspend array. So I'm curious why the sync
thread can still exit when array is suspended. I know the reason now.
Because before f52f5c71f (md: fix stopping sync thread), the process
is raid_postsuspend->md_stop_writes->__md_stop_writes
(__md_stop_writes sets MD_RECOVERY_FROZEN). In patch f52f5c71f, it
doesn't set MD_RECOVERY_FROZEN in __md_stop_writes anymore.

The process changes to
1. raid_postsuspend->md_stop_writes->__md_stop_writes->stop_sync_thread
(wait until MD_RECOVERY_RUNNING clears)
2. md thread -> md_check_recovery -> unregister_sync_thread ->
md_reap_sync_thread (clears MD_RECOVERY_RUNNING, stop_sync_thread
returns, md_reap_sync_thread sets MD_RECOVERY_NEEDED)
3. raid_postsuspend->mddev_suspend
4. md sync thread starts again because __md_stop_writes doesn't set
MD_RECOVERY_FROZEN.
It's the reason why we can see sync thread still happens when raid is suspended.

So the patch fix this problem should:

As I said, this is really a different problem from this patch, and it is
fixed seperately by patch 9. Please take a look at that patch.

I think we're talking about the same problem. In patch07 it has a new
api md_frozen_sync_thread. It sets MD_RECOVERY_FROZEN before
stop_sync_thread. This is right. If we use this api in
raid_postsuspend, sync thread can't restart. So the deadlock can't
happen anymore?

We are not talking about the same problem at all. This patch just fix a
simple problem in md/raid(not dm-raid). And the deadlock can also be
triggered for md/raid the same.

- mddev_suspend() doesn't handle sync_thread at all;
- md_check_recovery() ignore suspended array;

Please keep in mind this patch just fix the above case. The deadlock in
dm-raid is just an example of problems caused by this. Fix the deadlock
other way doesn't mean this case is fine.

Because this patch set is used to fix dm raid deadlocks. But this
patch changes logic, it looks like more a feature - "we can start/stop
sync thread when array is suspended". Because this patch is added many
years ago and dm raid works well. If we change this, there is
possibilities to introduce new problems. Now we should try to walk
slowly.

This patch itself really is quite simple, it fixes problems for md/raid,
and can be triggered by dm-raid as well. This patch will be needed
regardless of dm-raid, and it's absolutely not a feature.

For dm-raid, there is no doubt that sync_thread should be stopped before
suspend, and keep frozen until resume, and this behaviour is not changed
at all and will never change. Other patches actually tries to gurantee
this. If you think this patch can introduce new problems for dm-raid,
please be more specific.

The problem in dm-raid is that it relies on __md_stop_writes() to stop
and frozen sync_thread, while it also relies that MD_RECOVERY_FROZEN is
not set, and this is abuse of MD_RECOVERY_FROZEN. And if you still think
there are problems with considering of the entire patchset, feel free to
discuss. :)

Thanks,
Kuai





[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux