Re: [PATCH -next v3 5/7] md: factor out a helper rdev_is_spare() from remove_and_add_spares()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

在 2023/08/23 10:28, Xiao Ni 写道:
On Wed, Aug 23, 2023 at 10:20 AM Xiao Ni <xni@xxxxxxxxxx> wrote:

On Sun, Aug 20, 2023 at 5:13 PM Yu Kuai <yukuai1@xxxxxxxxxxxxxxx> wrote:

From: Yu Kuai <yukuai3@xxxxxxxxxx>

There are no functional changes, just to make the code simpler and
prepare to delay remove_and_add_spares() to md_start_sync().

Signed-off-by: Yu Kuai <yukuai3@xxxxxxxxxx>
---
  drivers/md/md.c | 15 ++++++++++-----
  1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index ceace5ffadd6..11d27c934fdd 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -9169,6 +9169,14 @@ static bool rdev_removeable(struct md_rdev *rdev)
         return true;
  }

+static bool rdev_is_spare(struct md_rdev *rdev)
+{
+       return !test_bit(Candidate, &rdev->flags) && rdev->raid_disk >= 0 &&
+              !test_bit(In_sync, &rdev->flags) &&
+              !test_bit(Journal, &rdev->flags) &&
+              !test_bit(Faulty, &rdev->flags);
+}
+
  static int remove_and_add_spares(struct mddev *mddev,
                                  struct md_rdev *this)
  {
@@ -9217,13 +9225,10 @@ static int remove_and_add_spares(struct mddev *mddev,
         rdev_for_each(rdev, mddev) {
                 if (this && this != rdev)
                         continue;
+               if (rdev_is_spare(rdev))
+                       spares++;
                 if (test_bit(Candidate, &rdev->flags))
                         continue;

Hi Kuai

Why not put rdev_is_spare after testing Candidate?

Best Regards
Xiao

I know the answer now, Because the next patch wants to put codes into
the function rdev_addable

Yes, and thanks for the review!

Kuai

-               if (rdev->raid_disk >= 0 &&
-                   !test_bit(In_sync, &rdev->flags) &&
-                   !test_bit(Journal, &rdev->flags) &&
-                   !test_bit(Faulty, &rdev->flags))
-                       spares++;
                 if (rdev->raid_disk >= 0)
                         continue;
                 if (test_bit(Faulty, &rdev->flags))
--
2.39.2


Reviewed-by: Xiao Ni <xni@xxxxxxxxxx>

.





[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux