[PATCH -next 18/29] md: quiesce before md_kick_rdev_from_array() for md-cluster

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Yu Kuai <yukuai3@xxxxxxxxxx>

md_kick_rdev_from_array() can be called from md_check_recovery() and
md_reload_sb() for md-cluster, it's very complicated to use new apis to
suspend the array before holding 'reconfig_mutex' in this case.

Fortunately, md-cluster is only supported for raid1 and raid10, and they
both impelement quiesce() callback that is safe to be called from daemon
thread. Hence use quiesce() callback to prevent io concurrent with
removing rdev from the array.

Signed-off-by: Yu Kuai <yukuai3@xxxxxxxxxx>
---
 drivers/md/md.c | 38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 765667b5fa59..d550bacd0efc 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -9514,6 +9514,21 @@ void md_check_recovery(struct mddev *mddev)
 
 		if (mddev_is_clustered(mddev)) {
 			struct md_rdev *rdev, *tmp;
+			bool suspended = false;
+
+			/*
+			 * md-cluster is used for raid1/raid10, and they both
+			 * implement quiesce() callback that is safe to be
+			 * called from daemon thread.
+			 */
+			rdev_for_each(rdev, mddev)
+				if (test_bit(ClusterRemove, &rdev->flags) &&
+				    rdev->raid_disk < 0) {
+					mddev->pers->quiesce(mddev, true);
+					suspended = true;
+					break;
+				}
+
 			/* kick the device if another node issued a
 			 * remove disk.
 			 */
@@ -9522,6 +9537,9 @@ void md_check_recovery(struct mddev *mddev)
 						rdev->raid_disk < 0)
 					md_kick_rdev_from_array(rdev);
 			}
+
+			if (suspended)
+				mddev->pers->quiesce(mddev, false);
 		}
 
 		if (try_set_sync && !mddev->external && !mddev->in_sync) {
@@ -9814,6 +9832,7 @@ static void check_sb_changes(struct mddev *mddev, struct md_rdev *rdev)
 {
 	struct mdp_superblock_1 *sb = page_address(rdev->sb_page);
 	struct md_rdev *rdev2, *tmp;
+	bool suspended = false;
 	int role, ret;
 
 	/*
@@ -9828,6 +9847,22 @@ static void check_sb_changes(struct mddev *mddev, struct md_rdev *rdev)
 			md_bitmap_update_sb(mddev->bitmap);
 	}
 
+	/*
+	 * md-cluster is used for raid1/raid10, and they both
+	 * implement quiesce() callback.
+	 */
+	rdev_for_each(rdev2, mddev) {
+		if (test_bit(Faulty, &rdev2->flags))
+			continue;
+		role = le16_to_cpu(sb->dev_roles[rdev2->desc_nr]);
+		if (test_bit(Candidate, &rdev2->flags) &&
+		    role == MD_DISK_ROLE_FAULTY) {
+			mddev->pers->quiesce(mddev, true);
+			suspended = true;
+			break;
+		}
+	}
+
 	/* Check for change of roles in the active devices */
 	rdev_for_each_safe(rdev2, tmp, mddev) {
 		if (test_bit(Faulty, &rdev2->flags))
@@ -9883,6 +9918,9 @@ static void check_sb_changes(struct mddev *mddev, struct md_rdev *rdev)
 		}
 	}
 
+	if (suspended)
+		mddev->pers->quiesce(mddev, false);
+
 	if (mddev->raid_disks != le32_to_cpu(sb->raid_disks)) {
 		ret = update_raid_disks(mddev, le32_to_cpu(sb->raid_disks));
 		if (ret)
-- 
2.39.2




[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux