Re: Transferring an existing system from non-RAID disks to RAID1 disks in the same computer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





Am 15.01.23 um 09:41 schrieb Wols Lists:
Are your /boot and /boot/efi using superblock 1.0? My system is bios/grub, so not the same, but I use plain partitions here because otherwise you're likely to get in a circular dependency - you need efi to boot, but the system can't access efi until it's booted ... oops!
the UEFI don't care where the ESP is mounted later
from the viewpoint of the UEFI all paths are /-prefixed

that's only relevant for the OS at the time of kernel-install / updates and the ESP is vfat and don't support RAID anyways



[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux