Re: [PATCH 1/3] raid0, linear, md: add error_handlers for raid0 and linear

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Mar 22, 2022 at 8:24 AM Mariusz Tkaczyk
<mariusz.tkaczyk@xxxxxxxxxxxxxxx> wrote:
>
> Patch 62f7b1989c0 ("md raid0/linear: Mark array as 'broken' and fail BIOs
> if a member is gone") allowed to finish writes earlier (before level
> dependent actions) for non-redundant arrays.
>
> To achieve that MD_BROKEN is added to mddev->flags if drive disappearance
> is detected. This is done in is_mddev_broken() which is confusing and not
> consistent with other levels where error_handler() is used.
> This patch adds appropriate error_handler for raid0 and linear and adopt
> md_error() to the change.
>
> Usage of error_handler causes that disk failure can be requested from
> userspace. User can fail the array via #mdadm --set-faulty command. This
> is not safe and will be fixed in mdadm. It is correctable because failed
> state is not recorded in the metadata. After next assembly array will be
> read-write again. For safety reason is better to keep MD_BROKEN in
> runtime only.
>
> Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@xxxxxxxxxxxxxxx>

Sorry for the late response.

> ---
>  drivers/md/md-linear.c | 14 +++++++++++++-
>  drivers/md/md.c        |  6 +++++-
>  drivers/md/md.h        | 10 ++--------
>  drivers/md/raid0.c     | 14 +++++++++++++-
>  4 files changed, 33 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/md/md-linear.c b/drivers/md/md-linear.c
> index 1ff51647a682..c33cd28f1dba 100644
> --- a/drivers/md/md-linear.c
> +++ b/drivers/md/md-linear.c
> @@ -233,7 +233,8 @@ static bool linear_make_request(struct mddev *mddev, struct bio *bio)
>                      bio_sector < start_sector))
>                 goto out_of_bounds;
>
> -       if (unlikely(is_mddev_broken(tmp_dev->rdev, "linear"))) {
> +       if (unlikely(is_rdev_broken(tmp_dev->rdev))) {
> +               md_error(mddev, tmp_dev->rdev);

I apologize if we discussed this before. Shall we just call linear_error()
here?If we go this way, we don't really need ...

>                 bio_io_error(bio);
>                 return true;
>         }
> @@ -281,6 +282,16 @@ static void linear_status (struct seq_file *seq, struct mddev *mddev)
>         seq_printf(seq, " %dk rounding", mddev->chunk_sectors / 2);
>  }
>
> +static void linear_error(struct mddev *mddev, struct md_rdev *rdev)
> +{
> +       if (!test_and_set_bit(MD_BROKEN, &mddev->flags)) {
> +               char *md_name = mdname(mddev);
> +
> +               pr_crit("md/linear%s: Disk failure on %pg detected, failing array.\n",
> +                       md_name, rdev->bdev);
> +       }
> +}
> +
>  static void linear_quiesce(struct mddev *mddev, int state)
>  {
>  }
> @@ -297,6 +308,7 @@ static struct md_personality linear_personality =
>         .hot_add_disk   = linear_add,
>         .size           = linear_size,
>         .quiesce        = linear_quiesce,
> +       .error_handler  = linear_error,

... set error_handler here, and ...

>  };
>
>  static int __init linear_init (void)
> diff --git a/drivers/md/md.c b/drivers/md/md.c
> index 0a89f072dae0..3354afc9d2a3 100644
> --- a/drivers/md/md.c
> +++ b/drivers/md/md.c
> @@ -7985,7 +7985,11 @@ void md_error(struct mddev *mddev, struct md_rdev *rdev)
>
>         if (!mddev->pers || !mddev->pers->error_handler)
>                 return;
> -       mddev->pers->error_handler(mddev,rdev);
> +       mddev->pers->error_handler(mddev, rdev);
> +
> +       if (mddev->pers->level == 0 || mddev->pers->level == LEVEL_LINEAR)
> +               return;

... this check here.

Did I miss something?

Thanks,
Song

[...]



[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux