Re: "--re-add for /dev/sdb1 to /dev/md0 is not possible"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 22/09/2020 11:27, Roy Sigurd Karlsbakk wrote:
It would be very nice if someone at linux-raid could prioritise this rather obvious bug in the bbl code, where the bbl keeps replicating itself over and over, regardless of any actual failures on the disks. IMHO the whole BBL should be scrapped, as mentioned earlier, since it really has no function. Mapping out bad sectors is for the drive to decide and if it can't handle it, it should be kicked out of the array.

Well, I guess if you want a volunteer, you're it! Thanks for steping up to the plate!

Cheers,
Wol



[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux