On Sun, Jul 19 2020, Zhao Heming wrote:
> When array convert to clustered bitmap, the safe_mode_delay doesn't clean and vice versa.
> the /sys/block/mdX/md/safe_mode_delay keep original value after changing bitmap type.
> in safe_delay_store(), the code forbids setting mddev->safemode_delay when array is clustered.
> So in cluster-md env, the expected safemode_delay value should be 0.
>
> reproduction steps:
> ```
> node1 # mdadm --zero-superblock /dev/sd{b,c,d}
> node1 # mdadm -C /dev/md0 -b internal -e 1.2 -n 2 -l mirror /dev/sdb /dev/sdc
> node1 # cat /sys/block/md0/md/safe_mode_delay
> 0.204
> node1 # mdadm -G /dev/md0 -b none
> node1 # mdadm --grow /dev/md0 --bitmap=clustered
> node1 # cat /sys/block/md0/md/safe_mode_delay
> 0.204 <== doesn't change, should ZERO for cluster-md
>
> node1 # mdadm --zero-superblock /dev/sd{b,c,d}
> node1 # mdadm -C /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sdb /dev/sdc
> node1 # cat /sys/block/md0/md/safe_mode_delay
> 0.000
> node1 # mdadm -G /dev/md0 -b none
> node1 # cat /sys/block/md0/md/safe_mode_delay
> 0.000 <== doesn't change, should default value
> ```
>
> md_setup_cluster() is a good place for setting, but md_cluster_stop is
> good for clean job when md_setup_cluster return err.
>
> see below flow:
> (user space)
> mdadm -C /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sda /dev/sdb
> mdadm --grow /dev/md0 -b none
> (kernel space)
> SET_ARRAY_INFO
> update_array_info
> + mddev->bitmap_info.nodes = 0;
> + md_cluster_ops->leave(mddev)
> + md_bitmap_destroy
> md_bitmap_free //won't trigger md_cluster_stop() because above set 0.
>
> Signed-off-by: Zhao Heming <heming.zhao@xxxxxxxx>
> ---
> drivers/md/md.c | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/md/md.c b/drivers/md/md.c
> index f567f536b529..e20f1d5a5261 100644
> --- a/drivers/md/md.c
> +++ b/drivers/md/md.c
> @@ -101,6 +101,8 @@ static void mddev_detach(struct mddev *mddev);
> * count by 2 for every hour elapsed between read errors.
> */
> #define MD_DEFAULT_MAX_CORRECTED_READ_ERRORS 20
> +/* Default safemode delay: 200 msec */
> +#define DEFAULT_SAFEMODE_DELAY ((200 * HZ)/1000 +1)
> /*
> * Current RAID-1,4,5 parallel reconstruction 'guaranteed speed limit'
> * is 1000 KB/sec, so the extra system load does not show up that much.
> @@ -5982,7 +5984,7 @@ int md_run(struct mddev *mddev)
> if (mddev_is_clustered(mddev))
> mddev->safemode_delay = 0;
> else
> - mddev->safemode_delay = (200 * HZ)/1000 +1; /* 200 msec delay */
> + mddev->safemode_delay = DEFAULT_SAFEMODE_DELAY;
> mddev->in_sync = 1;
> smp_wmb();
> spin_lock(&mddev->lock);
> @@ -7361,6 +7363,7 @@ static int update_array_info(struct mddev *mddev, mdu_array_info_t *info)
>
> mddev->bitmap_info.nodes = 0;
> md_cluster_ops->leave(mddev);
> + mddev->safemode_delay = DEFAULT_SAFEMODE_DELAY;
> }
> mddev_suspend(mddev);
> md_bitmap_destroy(mddev);
> @@ -8366,6 +8369,7 @@ int md_setup_cluster(struct mddev *mddev, int nodes)
> }
> spin_unlock(&pers_lock);
>
> + mddev->safemode_delay = 0;
> return md_cluster_ops->join(mddev, nodes);
I still don't think you should change safemode_delay here until after
->join succeeds.
NeilBrown
> }
>
> @@ -8375,6 +8379,7 @@ void md_cluster_stop(struct mddev *mddev)
> return;
> md_cluster_ops->leave(mddev);
> module_put(md_cluster_mod);
> + mddev->safemode_delay = DEFAULT_SAFEMODE_DELAY;
> }
>
> static int is_mddev_idle(struct mddev *mddev, int init)
> --
> 2.25.0
Attachment:
signature.asc
Description: PGP signature
