On 4/26/20 4:21 PM, Wols Lists wrote:
Run lsdrv over the drive and see what that reports.
https://raid.wiki.kernel.org/index.php/Asking_for_help
If you post that here, hopefully somebody can help you reconstruct
whatever was there.
Cheers,
Wol
here is the output of lsdrv for the drive.
USB [usb-storage] Bus 001 Device 002: ID 152d:2338 JMicron Technology
Corp. / JMicron USA Technology Corp. JM20337 Hi-Speed USB to SATA & PATA
Combo Bridge {000000000005}
└scsi 4:0:0:0 TOSHIBA HDWD110 {585T7P6NS}
└sdb 931.51g [8:16] Partitioned (dos)
└sdb1 931.51g [8:17] Empty/Unknown
Here is the smartctl output
# smartctl --xall /dev/sdb
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-96-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA HDWD110
Serial Number: 585T7P6NS
LU WWN Device Id: 5 000039 fd6d91d41
Firmware Version: MS2OA8R0
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Mon Apr 27 10:35:19 2020 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Write SCT (Get) Feature Control Command failed: Read of ATA output
registers not implemented [JMicron]
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 7070) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 118) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
2 Throughput_Performance P-S--- 142 142 054 - 68
3 Spin_Up_Time POS--- 160 160 024 - 152
(Average 135)
4 Start_Stop_Count -O--C- 100 100 000 - 22
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
8 Seek_Time_Performance P-S--- 110 110 020 - 36
9 Power_On_Hours -O--C- 100 100 000 - 1417
10 Spin_Retry_Count PO--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 17
192 Power-Off_Retract_Count -O--CK 100 100 000 - 55
193 Load_Cycle_Count -O--C- 100 100 000 - 55
194 Temperature_Celsius -O---- 200 200 000 - 30 (Min/Max
24/38)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA
commands not implemented [JMicron]
Read GP Log Directory failed
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x06 SL R/O 1 SMART self-test log
0x09 SL R/W 1 Selective self-test log
0x80-0x9f SL R/W 16 Host vendor specific log
0xe0 SL R/W 1 SCT Command/Status
0xe1 SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log Version: 1
No Errors Logged
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 444 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 30 Celsius
Power Cycle Min/Max Temperature: 27/33 Celsius
Lifetime Min/Max Temperature: 24/38 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (55)
Index Estimated Time Temperature Celsius
56 2020-04-27 08:28 29 **********
... ..( 58 skipped). .. **********
115 2020-04-27 09:27 29 **********
116 2020-04-27 09:28 30 ***********
117 2020-04-27 09:29 29 **********
118 2020-04-27 09:30 29 **********
119 2020-04-27 09:31 29 **********
120 2020-04-27 09:32 30 ***********
121 2020-04-27 09:33 29 **********
122 2020-04-27 09:34 29 **********
123 2020-04-27 09:35 30 ***********
124 2020-04-27 09:36 29 **********
125 2020-04-27 09:37 29 **********
126 2020-04-27 09:38 30 ***********
127 2020-04-27 09:39 30 ***********
0 2020-04-27 09:40 30 ***********
1 2020-04-27 09:41 29 **********
2 2020-04-27 09:42 29 **********
3 2020-04-27 09:43 30 ***********
4 2020-04-27 09:44 29 **********
5 2020-04-27 09:45 29 **********
6 2020-04-27 09:46 30 ***********
7 2020-04-27 09:47 30 ***********
8 2020-04-27 09:48 29 **********
9 2020-04-27 09:49 30 ***********
... ..( 45 skipped). .. ***********
55 2020-04-27 10:35 30 ***********
Write SCT (Get) Error Recovery Control Command failed: Read of ATA
output registers not implemented [JMicron]
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA
commands not implemented [JMicron]
Read SATA Phy Event Counters failed
