I have the following situation:
I’ve set up my Windows PC a long time ago to have the following raid setup:
- Two 1TB disks in this machine
- Intel Matrix Storage Mgmt
- The disks have one IMSM raid container with two volumes inside
+ The first 200GB of both disks is allocated to a RAID0 volume
+ The remaining 800GB of both disks form a RAID1 volume
- Both volumes then contain multiple partitions with various data,
+ mostly the RAID0 one contains partitions for OS files (Windows
System Partition, C-drive and the like)
+ and then the RAID1 contains actual personal data (documents,
photos, music etc)
A few months back, I decided to try and install a dual-boot Ubuntu
18.04 on the machine.
What ended up happening (I think) is I let the installer write the
partition table to the wrong part of the disk (/dev/sda instead of a
devmapper/dmraid block device, I don't remember exactly), which
corrupted the raid setup. I haven't touched the device since then, but
now want to start using the machine again and hence want to recover my
data as much as possible before (if necessary) reinstalling any OSes.
The current situation is that I can no longer boot the PC from disk
(nor windows or linux) and I can no longer read any of my data on
either disk/volume/partition by default when using a linux-from-USB.
When inspecting the partitions on the drives, it detects invalid
partitions which make no sense (incorrect filesystem types, partition
sizes, etc).
However, some fiddling with mdadm –scan can mount the RAID1 volume in
degraded mode which allows me to read my files in that volume.
This leads me to believe that IMSM stores some metadata at the
beginning of both disks (I’ve found no proof or documentation anywhere
that confirms this), and that my writing of a new partition table has
overwritten or at least corrupted that metadata on the first disk.
I’ve gotten this far in investigating, but am no closer to fixing the
issue. I have been hesitant to run any operations which might be
destructive to my data (if it’s not lost already?). Any help in
further diagnosing - and especially in fixing - my screwup would be
greatly appreciated!
Kind regards,
Adriaan Callaerts
PCI [ahci] 00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 05)
├scsi 0:0:0:0 ATA TOSHIBA MQ01ABD1 {43GUCE2YT}
│└sda 931.51g [8:0] Partitioned (gpt)
│ ├sda1 300.00m [8:1] Empty/Unknown
│ ├sda2 100.00m [8:2] Empty/Unknown
│ ├sda3 128.00m [8:3] Empty/Unknown
│ ├sda4 178.11g [8:4] Empty/Unknown
│ ├sda5 565.00m [8:5] Empty/Unknown
│ ├sda6 9.31g [8:6] Empty/Unknown
│ └sda7 11.51g [8:7] Empty/Unknown
└scsi 3:0:0:0 ATA HGST HTS721010A9 {JG40006PGNY9AC}
└sdb 931.51g [8:16] isw_raid_member
└sdb1 100.00m [8:17] Empty/Unknown
USB [usb-storage] Bus 003 Device 002: ID 13fe:4100 Kingston Technology Company Inc. Flash drive {07012A14B8647A66}
└scsi 6:0:0:0 USB DISK 2.0
└sdc 7.28g [8:32] Partitioned (dos) 'Xubuntu_18.04_LTS_amd64' {2018-04-26-18-40-26-00}
└Mounted as /dev/sdc @ /cdrom
Other Block Devices
├loop0 1.25g [7:0] squashfs
│└Mounted as /dev/loop0 @ /rofs
├loop1 0.00k [7:1] Empty/Unknown
├loop2 0.00k [7:2] Empty/Unknown
├loop3 0.00k [7:3] Empty/Unknown
├loop4 0.00k [7:4] Empty/Unknown
├loop5 0.00k [7:5] Empty/Unknown
├loop6 0.00k [7:6] Empty/Unknown
├loop7 0.00k [7:7] Empty/Unknown
├sdc1 1.33g [8:33] Partitioned (dos) 'Xubuntu_18.04_LTS_amd64' {2018-04-26-18-40-26-00}
└sdc2 2.28m [8:34] vfat {044E-AC17}
Personalities :
unused devices: <none>
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA MQ01ABD100H
Serial Number: 43GUCE2YT
LU WWN Device Id: 5 000039 4b4184b7b
Firmware Version: ALF07M
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Apr 7 21:24:10 2020 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 241) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 2531
4 Start_Stop_Count -O--CK 100 100 000 - 3855
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
8 Seek_Time_Performance P-S--- 100 100 050 - 0
9 Power_On_Hours -O--CK 076 076 000 - 9937
10 Spin_Retry_Count PO--CK 176 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 2563
191 G-Sense_Error_Rate -O--CK 100 100 000 - 19
192 Power-Off_Retract_Count -O--CK 099 099 000 - 858
193 Load_Cycle_Count -O--CK 062 062 000 - 380215
194 Temperature_Celsius -O---K 100 100 000 - 38 (Min/Max 7/67)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 20
220 Disk_Shift -O---- 100 100 000 - 0
222 Loaded_Hours -O--CK 094 094 000 - 2489
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 260
240 Head_Flying_Hours P----- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xb7 GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 20
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 20 [19] occurred at disk power-on lifetime: 9306 hours (387 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 d8 00 00 1d d8 17 07 40 00 Error: ICRC, ABRT at LBA = 0x1dd81707 = 500700935
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 d8 00 00 1d d8 16 08 40 00 02:18:58.914 READ FPDMA QUEUED
60 01 00 00 d0 00 00 1d d8 15 08 40 00 02:18:58.913 READ FPDMA QUEUED
60 01 00 00 c8 00 00 1d d8 14 08 40 00 02:18:58.911 READ FPDMA QUEUED
60 01 00 00 c0 00 00 1d d8 13 08 40 00 02:18:58.910 READ FPDMA QUEUED
60 01 00 00 b8 00 00 1d d8 12 08 40 00 02:18:58.908 READ FPDMA QUEUED
Error 19 [18] occurred at disk power-on lifetime: 9141 hours (380 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 48 00 00 01 68 3b c7 40 00 Error: ICRC, ABRT at LBA = 0x01683bc7 = 23608263
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 48 00 00 01 68 3b c0 40 00 01:23:51.127 READ FPDMA QUEUED
60 00 08 00 40 00 00 01 68 3b 40 40 00 01:23:51.123 READ FPDMA QUEUED
60 00 08 00 38 00 00 01 68 3a c0 40 00 01:23:51.117 READ FPDMA QUEUED
60 00 08 00 30 00 00 01 68 3a 40 40 00 01:23:51.109 READ FPDMA QUEUED
60 00 08 00 28 00 00 01 68 39 c0 40 00 01:23:51.106 READ FPDMA QUEUED
Error 18 [17] occurred at disk power-on lifetime: 9020 hours (375 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 b0 00 00 00 45 ac 5f 40 00 Error: ICRC, ABRT at LBA = 0x0045ac5f = 4566111
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 b0 00 00 00 45 ac 58 40 00 02:10:37.813 READ FPDMA QUEUED
60 00 08 00 a8 00 00 00 45 b0 d0 40 00 02:10:37.809 READ FPDMA QUEUED
60 00 20 00 a0 00 00 04 98 dd e0 40 00 02:10:37.782 READ FPDMA QUEUED
60 00 08 00 98 00 00 04 98 dd e8 40 00 02:10:37.781 READ FPDMA QUEUED
60 00 20 00 90 00 00 04 98 dd c0 40 00 02:10:37.770 READ FPDMA QUEUED
Error 17 [16] occurred at disk power-on lifetime: 8451 hours (352 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 98 00 00 04 3c 2f ff 40 00 Error: ICRC, ABRT at LBA = 0x043c2fff = 71053311
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 98 00 00 04 3c 2f 00 40 00 00:47:46.927 READ FPDMA QUEUED
61 00 20 00 90 00 00 04 32 4e e0 40 00 00:47:46.925 WRITE FPDMA QUEUED
61 00 20 00 88 00 00 04 32 4e c0 40 00 00:47:46.924 WRITE FPDMA QUEUED
61 00 20 00 80 00 00 04 32 4e a0 40 00 00:47:46.924 WRITE FPDMA QUEUED
61 00 20 00 78 00 00 04 32 4e 80 40 00 00:47:46.923 WRITE FPDMA QUEUED
Error 16 [15] occurred at disk power-on lifetime: 8265 hours (344 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 d8 00 00 00 96 04 57 40 00 Error: ICRC, ABRT at LBA = 0x00960457 = 9831511
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 d8 00 00 00 96 04 50 40 00 00:57:18.237 WRITE FPDMA QUEUED
61 00 08 00 d0 00 00 00 08 b0 d0 40 00 00:57:18.237 WRITE FPDMA QUEUED
61 00 08 00 c8 00 00 02 a4 d8 b0 40 00 00:57:18.235 WRITE FPDMA QUEUED
61 00 08 00 c0 00 00 02 a4 b6 40 40 00 00:57:18.234 WRITE FPDMA QUEUED
61 00 08 00 b8 00 00 00 3a 51 c8 40 00 00:57:18.234 WRITE FPDMA QUEUED
Error 15 [14] occurred at disk power-on lifetime: 8068 hours (336 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 98 00 00 00 c6 fd 27 40 00 Error: ICRC, ABRT at LBA = 0x00c6fd27 = 13040935
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 d8 00 a0 00 00 00 c6 fd 28 40 00 01:24:09.314 WRITE FPDMA QUEUED
61 00 28 00 98 00 00 00 c6 fd 00 40 00 01:24:09.314 WRITE FPDMA QUEUED
61 00 d8 00 90 00 00 00 c6 fc 28 40 00 01:24:09.314 WRITE FPDMA QUEUED
61 00 28 00 88 00 00 00 c6 fc 00 40 00 01:24:09.314 WRITE FPDMA QUEUED
61 00 d8 00 80 00 00 00 c6 fb 28 40 00 01:24:09.314 WRITE FPDMA QUEUED
Error 14 [13] occurred at disk power-on lifetime: 8032 hours (334 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 10 00 00 0f 2d 7e c7 40 00 Error: ICRC, ABRT at LBA = 0x0f2d7ec7 = 254639815
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 20 00 00 00 a9 9c ea 40 00 00:05:41.969 READ FPDMA QUEUED
60 01 00 00 18 00 00 0f 2d 7f c8 40 00 00:05:41.964 READ FPDMA QUEUED
60 01 00 00 10 00 00 0f 2d 7d c8 40 00 00:05:41.964 READ FPDMA QUEUED
60 01 00 00 08 00 00 0f 2d 7b c8 40 00 00:05:41.964 READ FPDMA QUEUED
60 01 00 00 00 00 00 0f 2d 79 c8 40 00 00:05:41.964 READ FPDMA QUEUED
Error 13 [12] occurred at disk power-on lifetime: 7821 hours (325 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 e0 00 00 03 87 e9 d7 40 00 Error: ICRC, ABRT at LBA = 0x0387e9d7 = 59238871
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 e0 00 00 03 87 e9 d0 40 00 03:09:31.254 WRITE FPDMA QUEUED
61 00 08 00 d8 00 00 03 87 e8 f8 40 00 03:09:31.254 WRITE FPDMA QUEUED
61 00 08 00 d0 00 00 03 87 e8 b8 40 00 03:09:31.254 WRITE FPDMA QUEUED
61 00 08 00 c8 00 00 03 87 e7 d0 40 00 03:09:31.252 WRITE FPDMA QUEUED
61 00 08 00 c0 00 00 03 87 e6 00 40 00 03:09:31.252 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 1 (0x0001)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 38 Celsius
Power Cycle Min/Max Temperature: 19/38 Celsius
Lifetime Min/Max Temperature: 7/67 Celsius
Under/Over Temperature Limit Count: 0/11959
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/55 Celsius
Min/Max Temperature Limit: 5/55 Celsius
Temperature History Size (Index): 478 (208)
Index Estimated Time Temperature Celsius
209 2020-04-07 13:27 36 *****************
... ..(221 skipped). .. *****************
431 2020-04-07 17:09 36 *****************
432 2020-04-07 17:10 35 ****************
433 2020-04-07 17:11 36 *****************
... ..( 77 skipped). .. *****************
33 2020-04-07 18:29 36 *****************
34 2020-04-07 18:30 37 ******************
... ..( 5 skipped). .. ******************
40 2020-04-07 18:36 37 ******************
41 2020-04-07 18:37 36 *****************
42 2020-04-07 18:38 36 *****************
43 2020-04-07 18:39 36 *****************
44 2020-04-07 18:40 37 ******************
... ..( 69 skipped). .. ******************
114 2020-04-07 19:50 37 ******************
115 2020-04-07 19:51 38 *******************
... ..( 5 skipped). .. *******************
121 2020-04-07 19:57 38 *******************
122 2020-04-07 19:58 37 ******************
123 2020-04-07 19:59 37 ******************
124 2020-04-07 20:00 38 *******************
... ..( 3 skipped). .. *******************
128 2020-04-07 20:04 38 *******************
129 2020-04-07 20:05 37 ******************
... ..( 4 skipped). .. ******************
134 2020-04-07 20:10 37 ******************
135 2020-04-07 20:11 38 *******************
136 2020-04-07 20:12 38 *******************
137 2020-04-07 20:13 38 *******************
138 2020-04-07 20:14 37 ******************
... ..( 5 skipped). .. ******************
144 2020-04-07 20:20 37 ******************
145 2020-04-07 20:21 38 *******************
... ..( 4 skipped). .. *******************
150 2020-04-07 20:26 38 *******************
151 2020-04-07 20:27 37 ******************
... ..( 2 skipped). .. ******************
154 2020-04-07 20:30 37 ******************
155 2020-04-07 20:31 38 *******************
... ..( 2 skipped). .. *******************
158 2020-04-07 20:34 38 *******************
159 2020-04-07 20:35 37 ******************
... ..( 4 skipped). .. ******************
164 2020-04-07 20:40 37 ******************
165 2020-04-07 20:41 38 *******************
166 2020-04-07 20:42 37 ******************
... ..( 6 skipped). .. ******************
173 2020-04-07 20:49 37 ******************
174 2020-04-07 20:50 38 *******************
... ..( 3 skipped). .. *******************
178 2020-04-07 20:54 38 *******************
179 2020-04-07 20:55 37 ******************
... ..( 4 skipped). .. ******************
184 2020-04-07 21:00 37 ******************
185 2020-04-07 21:01 38 *******************
186 2020-04-07 21:02 38 *******************
187 2020-04-07 21:03 37 ******************
... ..( 6 skipped). .. ******************
194 2020-04-07 21:10 37 ******************
195 2020-04-07 21:11 38 *******************
196 2020-04-07 21:12 38 *******************
197 2020-04-07 21:13 38 *******************
198 2020-04-07 21:14 37 ******************
... ..( 4 skipped). .. ******************
203 2020-04-07 21:19 37 ******************
204 2020-04-07 21:20 38 *******************
... ..( 3 skipped). .. *******************
208 2020-04-07 21:24 38 *******************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 2563 --- Lifetime Power-On Resets
0x01 0x010 4 9937 --- Power-on Hours
0x01 0x018 6 37440021334 --- Logical Sectors Written
0x01 0x020 6 688968272 --- Number of Write Commands
0x01 0x028 6 67417870774 --- Logical Sectors Read
0x01 0x030 6 744298234 --- Number of Read Commands
0x02 ===== = = === == Free-Fall Statistics (rev 1) ==
0x02 0x010 4 19 --- Overlimit Shock Events
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 9738 --- Spindle Motor Power-on Hours
0x03 0x010 4 2489 --- Head Flying Hours
0x03 0x018 4 380215 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 33 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 38 --- Current Temperature
0x05 0x010 1 35 N-- Average Short Term Temperature
0x05 0x018 1 37 N-- Average Long Term Temperature
0x05 0x020 1 67 --- Highest Temperature
0x05 0x028 1 7 --- Lowest Temperature
0x05 0x030 1 55 N-- Highest Average Short Term Temperature
0x05 0x038 1 31 N-- Lowest Average Short Term Temperature
0x05 0x040 1 47 N-- Highest Average Long Term Temperature
0x05 0x048 1 36 N-- Lowest Average Long Term Temperature
0x05 0x050 4 20784 --- Time in Over-Temperature
0x05 0x058 1 55 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 5 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 13210 --- Number of Hardware Resets
0x06 0x018 4 20 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 16 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 4 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 4 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
/dev/sda:
MBR Magic : aa55
Partition[0] : 1953525167 sectors at 1 (type ee)
/dev/sdb:
Magic : Intel Raid ISM Cfg Sig.
Version : 1.3.00
Orig Family : 860da8c7
Family : 860da8c7
Generation : 00142d6a
Attributes : All supported
UUID : e25c2506:373d6484:3cbc4a75:8d76952f
Checksum : 99ecca63 correct
MPB Sectors : 2
Disks : 2
RAID Devices : 2
Disk01 Serial : JG40006PGNY9AC
State : active
Id : 00000003
Usable Size : 1953514766 (931.51 GiB 1000.20 GB)
[FHDD]:
UUID : e4be7bbd:f4678f2c:7a8f59e2:b31d9d73
RAID Level : 0
Members : 2
Slots : [_U]
Failed disk : 1
This Slot : 1
Sector Size : 512
Array Size : 419430400 (200.00 GiB 214.75 GB)
Per Dev Size : 209715464 (100.00 GiB 107.37 GB)
Sector Offset : 0
Num Stripes : 819200
Chunk Size : 128 KiB
Reserved : 0
Migrate State : idle
Map State : failed
Dirty State : clean
RWH Policy : off
[SHDD]:
UUID : fee93acb:9e71b62a:43873ecc:0c21a0b3
RAID Level : 1
Members : 2
Slots : [_U]
Failed disk : 0
This Slot : 1
Sector Size : 512
Array Size : 1743781888 (831.50 GiB 892.82 GB)
Per Dev Size : 1743782152 (831.50 GiB 892.82 GB)
Sector Offset : 209719560
Num Stripes : 6811648
Chunk Size : 64 KiB
Reserved : 0
Migrate State : idle
Map State : degraded
Dirty State : clean
RWH Policy : off
Disk00 Serial : 43GUCE2YT:0:0
State : active failed
Id : ffffffff
Usable Size : 1953514766 (931.51 GiB 1000.20 GB)
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: HGST Travelstar 7K1000
Device Model: HGST HTS721010A9E630
Serial Number: JG40006PGNY9AC
LU WWN Device Id: 5 000cca 6acc9856a
Firmware Version: JB0OA3B0
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Apr 7 21:24:17 2020 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 45) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 185) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0
2 Throughput_Performance P-S--- 100 100 040 - 0
3 Spin_Up_Time POS--- 173 173 033 - 2
4 Start_Stop_Count -O--C- 099 099 000 - 2791
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
8 Seek_Time_Performance P-S--- 100 100 040 - 0
9 Power_On_Hours -O--C- 078 078 000 - 9928
10 Spin_Retry_Count PO--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 099 099 000 - 2563
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 116
193 Load_Cycle_Count -O--C- 092 092 000 - 83706
194 Temperature_Celsius -O---- 193 193 000 - 31 (Min/Max 5/48)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
223 Load_Retry_Count -O-R-- 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 1
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 [0] occurred at disk power-on lifetime: 2933 hours (122 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 78 00 00 6e f2 df 90 0e 00 Error: UNC at LBA = 0x6ef2df90 = 1861410704
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 38 00 00 6e f2 df 08 40 00 00:38:27.721 READ FPDMA QUEUED
60 01 00 00 30 00 00 6e f2 de 08 40 00 00:38:27.717 READ FPDMA QUEUED
60 01 00 00 28 00 00 6e f2 dd 08 40 00 00:38:27.715 READ FPDMA QUEUED
60 01 00 00 20 00 00 6e f2 dc 08 40 00 00:38:27.713 READ FPDMA QUEUED
60 01 00 00 18 00 00 6e f2 db 08 40 00 00:38:27.712 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 31 Celsius
Power Cycle Min/Max Temperature: 17/32 Celsius
Lifetime Min/Max Temperature: 5/48 Celsius
Lifetime Average Temperature: 31 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/65 Celsius
Temperature History Size (Index): 128 (100)
Index Estimated Time Temperature Celsius
101 2020-04-07 19:17 30 ***********
... ..( 41 skipped). .. ***********
15 2020-04-07 19:59 30 ***********
16 2020-04-07 20:00 31 ************
17 2020-04-07 20:01 30 ***********
18 2020-04-07 20:02 30 ***********
19 2020-04-07 20:03 31 ************
20 2020-04-07 20:04 30 ***********
21 2020-04-07 20:05 31 ************
22 2020-04-07 20:06 30 ***********
23 2020-04-07 20:07 30 ***********
24 2020-04-07 20:08 31 ************
25 2020-04-07 20:09 30 ***********
26 2020-04-07 20:10 31 ************
... ..( 2 skipped). .. ************
29 2020-04-07 20:13 31 ************
30 2020-04-07 20:14 30 ***********
31 2020-04-07 20:15 31 ************
32 2020-04-07 20:16 30 ***********
33 2020-04-07 20:17 30 ***********
34 2020-04-07 20:18 31 ************
35 2020-04-07 20:19 31 ************
36 2020-04-07 20:20 30 ***********
37 2020-04-07 20:21 30 ***********
38 2020-04-07 20:22 31 ************
39 2020-04-07 20:23 31 ************
40 2020-04-07 20:24 30 ***********
41 2020-04-07 20:25 31 ************
42 2020-04-07 20:26 31 ************
43 2020-04-07 20:27 30 ***********
44 2020-04-07 20:28 31 ************
45 2020-04-07 20:29 31 ************
46 2020-04-07 20:30 30 ***********
... ..( 4 skipped). .. ***********
51 2020-04-07 20:35 30 ***********
52 2020-04-07 20:36 31 ************
... ..( 14 skipped). .. ************
67 2020-04-07 20:51 31 ************
68 2020-04-07 20:52 30 ***********
69 2020-04-07 20:53 31 ************
70 2020-04-07 20:54 31 ************
71 2020-04-07 20:55 30 ***********
72 2020-04-07 20:56 31 ************
... ..( 27 skipped). .. ************
100 2020-04-07 21:24 31 ************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
