Re: Linux 5.5 Breaks Raid1 on Device instead of Partition, Unusable I/O

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi David,

On 3/2/20 4:27 AM, David C. Rankin wrote:
On 03/02/2020 01:08 AM, Chris Murphy wrote:
smart also reports for /de/sdc

   40 53 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455


So I'm suspicious of timeout mismatch as well.
https://raid.wiki.kernel.org/index.php/Timeout_Mismatch


Chris Murphy


The strace between the virtualbox host and guess show and number of I/O waits
that would seem to fit some timeout issue like that. But according to the
page, both drives in this array provide:

SCT capabilities:              (0x1085) SCT Status supported.

SCT Status itself isn't sufficient. You must have ERC "Error Recovery Control", an optional part of SCT.

smartctl -a doesn't expose that. Use smartctl -x in general, or smartctl -l scterc to specifically check the needed setting.

Phil



[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux