Re: WD MyCloud PR4100 RAID Failure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Dec 17, 2019 at 11:54:43AM -0500, Patrick Pearcy wrote:
> MDADM Examine:
> /dev/sda1:
>           Magic : a92b4efc
>         Version : 00.90.00
>            UUID : 3593a169:b2495fbf:90fa7060:4cac0d65
>   Creation Time : Tue Dec 17 10:56:15 2019

This was re-created...

>      Raid Level : raid1

...with Level 1 (Mirror)...

>   Used Dev Size : 2097088 (2048.28 MiB 2147.42 MB)
>      Array Size : 2097088 (2048.28 MiB 2147.42 MB)
>    Raid Devices : 4

...across 4 devices? With that all data would be gone, 
cause it would have replicated anything on disk #1 to 
the other disks.

Oh, it's just 2GiB. A firmware/boot partition, maybe?

Do you have examine for the data partitions?

Regards
Andreas Klauer



[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux