Greetings
Had some system issues and decided in the process of trying to repair
things that I would rather use my SSD (/dev/sdd) for my operating
system disk with the goal of improving performance. Up to this time
the raid-10 array had been working as expected so there are/were no
complaints nor issues.
I don't know if many or any of you have installed your operating
system on an SSD but this proves to be quite an interesting adventure,
especially when its a UEFI system. Have finally gotten things so there
is some semblance of order and wanted to start some items that had be
left idle as I spent time trying to effect my system installation.
It was at this point that I noticed that my Raid-10 array would not
mount (in the past a simple click on the left hand column icon for the
array would prompt a request for the root password to effect access
(after booting only) and then access would be available until a
subsequent reboot required the process to be repeated.
At present I am not able to access the array. Details of commands
tried are included in the following (which includes all of the
necessary background data, I hope (please advise if more information
is needed)). I chose not to attempt any --force actions without first
asking for advice on this list.
TIA for your assistance.
Dee
root@debianbase:/# cat /proc/mdstat
Personalities : [raid10] [linear] [multipath] [raid0] [raid1] [raid6]
[raid5] [raid4]
md0 : active (auto-read-only) raid10 sde1[7] sdf1[8] sdc1[5] sdb1[4]
1953518592 blocks super 1.2 512K chunks 2 near-copies [4/4] [UUUU]
unused devices: <none>
root@debianbase:/# fdisk -l
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: D04AE313-6B83-42E1-8DD0-F22374CA82C0
Device Start End Sectors Size Type
/dev/sda1 2048 499711 497664 243M EFI System
/dev/sda2 499712 1525759 1026048 501M EFI System
/dev/sda3 1525760 2025471 499712 244M Linux filesystem
/dev/sda4 2025472 31322111 29296640 14G Linux filesystem
/dev/sda5 31322112 156321791 124999680 59.6G Linux swap
/dev/sda6 156321792 166086655 9764864 4.7G Linux filesystem
/dev/sda7 166086656 185618431 19531776 9.3G Linux filesystem
/dev/sda8 185618432 205150207 19531776 9.3G Linux filesystem
/dev/sda9 205150208 224681983 19531776 9.3G Linux filesystem
/dev/sda10 224681984 1298900991 1074219008 512.2G Linux filesystem
/dev/sda11 1298900992 1347729407 48828416 23.3G Linux filesystem
/dev/sda12 1347729408 1353588735 5859328 2.8G Linux filesystem
/dev/sda13 1353588736 1368238079 14649344 7G Linux filesystem
/dev/sda14 1368238080 1397534719 29296640 14G Linux filesystem
/dev/sda15 1397534720 1412184063 14649344 7G Linux filesystem
/dev/sda16 1412184064 1705152511 292968448 139.7G Linux filesystem
/dev/sda17 1705152512 1753980927 48828416 23.3G Linux filesystem
/dev/sda18 1753980928 1773512703 19531776 9.3G Linux filesystem
/dev/sda19 1773512704 1793044479 19531776 9.3G Linux filesystem
/dev/sda20 1793044480 1817458687 24414208 11.7G Linux filesystem
/dev/sda21 1817460736 1858420735 40960000 19.5G Linux filesystem
Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: DB65C34C-3931-4489-A9F5-117EF9434E0E
Device Start End Sectors Size Type
/dev/sdb1 2048 1953523711 1953521664 931.5G Linux filesystem
Disk /dev/md0: 1.8 TiB, 2000403038208 bytes, 3907037184 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 524288 bytes / 1048576 bytes
Disklabel type: dos
Disk identifier: 0x00000000
Device Boot Start End Sectors Size Id Type
/dev/md0p1 2048 3907037183 3907035136 1.8T 83 Linux
Disk /dev/sdc: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 444D74E4-BFC9-41DD-B687-D56247D55500
Device Start End Sectors Size Type
/dev/sdc1 2048 1953523711 1953521664 931.5G Linux filesystem
Disk /dev/sdd: 223.6 GiB, 240057409536 bytes, 468862128 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 784C52AE-6049-44C1-9224-23235A36BBB3
Device Start End Sectors Size Type
/dev/sdd1 2048 1050623 1048576 512M EFI System
/dev/sdd2 1054720 1579007 524288 256M Linux filesystem
/dev/sdd3 1583104 22063103 20480000 9.8G Linux filesystem
/dev/sdd4 22067200 63027199 40960000 19.5G Linux filesystem
/dev/sdd5 63031296 73271295 10240000 4.9G Linux filesystem
/dev/sdd6 73275392 93755391 20480000 9.8G Linux filesystem
/dev/sdd7 93759488 144959487 51200000 24.4G Linux filesystem
Disk /dev/sde: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: EE8F5DCF-AE5D-47B6-B3CD-86226CCCEA64
Device Start End Sectors Size Type
/dev/sde1 2048 1953523711 1953521664 931.5G Linux filesystem
Disk /dev/sdf: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 7851B841-1CD1-4BE8-A5A1-9F18F69D81D2
Device Start End Sectors Size Type
/dev/sdf1 2048 1953523711 1953521664 931.5G Linux filesystem
root@debianbase:/# mdadm --detail /dev/md0
/dev/md0:
Version : 1.2
Creation Time : Mon Mar 5 08:26:28 2012
Raid Level : raid10
Array Size : 1953518592 (1863.02 GiB 2000.40 GB)
Used Dev Size : 976759296 (931.51 GiB 1000.20 GB)
Raid Devices : 4
Total Devices : 4
Persistence : Superblock is persistent
Update Time : Fri Apr 27 12:29:01 2018
State : clean
Active Devices : 4
Working Devices : 4
Failed Devices : 0
Spare Devices : 0
Layout : near=2
Chunk Size : 512K
Name : debianbase:0 (local to host debianbase)
UUID : 79baaa2f:0aa2b9fa:18e2ea6b:6e2846b3
Events : 65543
Number Major Minor RaidDevice State
5 8 33 0 active sync set-A /dev/sdc1
4 8 17 1 active sync set-B /dev/sdb1
7 8 65 2 active sync set-A /dev/sde1
8 8 81 3 active sync set-B /dev/sdf1
root@debianbase:/# mdadm --examine /dev/sdb
/dev/sdb:
MBR Magic : aa55
Partition[0] : 1953525167 sectors at 1 (type ee)
root@debianbase:/# mdadm --examine /dev/sdb1
/dev/sdb1:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x0
Array UUID : 79baaa2f:0aa2b9fa:18e2ea6b:6e2846b3
Name : debianbase:0 (local to host debianbase)
Creation Time : Mon Mar 5 08:26:28 2012
Raid Level : raid10
Raid Devices : 4
Avail Dev Size : 1953519616 (931.51 GiB 1000.20 GB)
Array Size : 1953518592 (1863.02 GiB 2000.40 GB)
Used Dev Size : 1953518592 (931.51 GiB 1000.20 GB)
Data Offset : 2048 sectors
Super Offset : 8 sectors
Unused Space : before=1960 sectors, after=1024 sectors
State : clean
Device UUID : c7f26246:2aa8d446:8d8a49ed:52c5a11d
Update Time : Fri Apr 27 12:29:01 2018
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : 1906bff5 - correct
Events : 65543
Layout : near=2
Chunk Size : 512K
Device Role : Active device 1
Array State : AAAA ('A' == active, '.' == missing, 'R' == replacing)
root@debianbase:/# mdadm --examine /dev/sdc1
/dev/sdc1:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x0
Array UUID : 79baaa2f:0aa2b9fa:18e2ea6b:6e2846b3
Name : debianbase:0 (local to host debianbase)
Creation Time : Mon Mar 5 08:26:28 2012
Raid Level : raid10
Raid Devices : 4
Avail Dev Size : 1953519616 (931.51 GiB 1000.20 GB)
Array Size : 1953518592 (1863.02 GiB 2000.40 GB)
Used Dev Size : 1953518592 (931.51 GiB 1000.20 GB)
Data Offset : 2048 sectors
Super Offset : 8 sectors
Unused Space : before=1960 sectors, after=1024 sectors
State : clean
Device UUID : f869ec9b:0cc02d7d:dd27c67c:f86a5eb9
Update Time : Fri Apr 27 12:29:01 2018
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : d02291ff - correct
Events : 65543
Layout : near=2
Chunk Size : 512K
Device Role : Active device 0
Array State : AAAA ('A' == active, '.' == missing, 'R' == replacing)
root@debianbase:/# mdadm --examine /dev/sde1
/dev/sde1:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x0
Array UUID : 79baaa2f:0aa2b9fa:18e2ea6b:6e2846b3
Name : debianbase:0 (local to host debianbase)
Creation Time : Mon Mar 5 08:26:28 2012
Raid Level : raid10
Raid Devices : 4
Avail Dev Size : 1953519616 (931.51 GiB 1000.20 GB)
Array Size : 1953518592 (1863.02 GiB 2000.40 GB)
Used Dev Size : 1953518592 (931.51 GiB 1000.20 GB)
Data Offset : 2048 sectors
Super Offset : 8 sectors
Unused Space : before=1960 sectors, after=1024 sectors
State : clean
Device UUID : e28f9336:745c1005:546f5df0:0ce392ee
Update Time : Fri Apr 27 12:29:01 2018
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : 9b7813de - correct
Events : 65543
Layout : near=2
Chunk Size : 512K
Device Role : Active device 2
Array State : AAAA ('A' == active, '.' == missing, 'R' == replacing)
root@debianbase:/# mdadm --examine /dev/sdf1
/dev/sdf1:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x0
Array UUID : 79baaa2f:0aa2b9fa:18e2ea6b:6e2846b3
Name : debianbase:0 (local to host debianbase)
Creation Time : Mon Mar 5 08:26:28 2012
Raid Level : raid10
Raid Devices : 4
Avail Dev Size : 1953519616 (931.51 GiB 1000.20 GB)
Array Size : 1953518592 (1863.02 GiB 2000.40 GB)
Used Dev Size : 1953518592 (931.51 GiB 1000.20 GB)
Data Offset : 2048 sectors
Super Offset : 8 sectors
Unused Space : before=1960 sectors, after=1024 sectors
State : clean
Device UUID : f98e28d6:dbac496d:13805880:abfb4533
Update Time : Fri Apr 27 12:29:01 2018
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : 77f48cbb - correct
Events : 65543
Layout : near=2
Chunk Size : 512K
Device Role : Active device 3
Array State : AAAA ('A' == active, '.' == missing, 'R' == replacing)
root@debianbase:/# cat /proc/mdstat
Personalities : [raid10] [linear] [multipath] [raid0] [raid1] [raid6]
[raid5] [raid4]
md0 : active (auto-read-only) raid10 sdc1[5] sdf1[8] sde1[7] sdb1[4]
1953518592 blocks super 1.2 512K chunks 2 near-copies [4/4] [UUUU]
unused devices: <none>
root@debianbase:/# smartctl
bash: smartctl: command not found
root@debianbase:/# smartctl
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-3-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
ERROR: smartctl requires a device name as the final command-line argument.
Use smartctl -h to get a usage summary
root@debianbase:/# smartctl /dev/sdb1
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-3-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
ATA device successfully opened
Use 'smartctl -a' (or '-x') to print SMART (and more) information
root@debianbase:/# smartctl -a /dev/sdb1
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-3-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD10EFRX-68FYTN0
Serial Number: WD-WCC4J3TC25D3
LU WWN Device Id: 5 0014ee 20cd9cd93
Firmware Version: 82.00A82
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat Apr 28 15:16:12 2018 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (13980) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 159) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail
Always - 0
3 Spin_Up_Time 0x0027 137 131 021 Pre-fail
Always - 4125
4 Start_Stop_Count 0x0032 100 100 000 Old_age
Always - 102
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age
Always - 0
9 Power_On_Hours 0x0032 078 078 000 Old_age
Always - 16105
10 Spin_Retry_Count 0x0032 100 100 000 Old_age
Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 85
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age
Always - 43
193 Load_Cycle_Count 0x0032 193 193 000 Old_age
Always - 22264
194 Temperature_Celsius 0x0022 110 105 000 Old_age
Always - 33
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age
Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age
Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@debianbase:/# smartctl -a /dev/sdc1
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-3-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD10EFRX-68FYTN0
Serial Number: WD-WCC4J6TTLZTE
LU WWN Device Id: 5 0014ee 2b784490e
Firmware Version: 82.00A82
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat Apr 28 15:17:12 2018 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (13440) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 153) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail
Always - 0
3 Spin_Up_Time 0x0027 135 131 021 Pre-fail
Always - 4233
4 Start_Stop_Count 0x0032 100 100 000 Old_age
Always - 88
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age
Always - 0
9 Power_On_Hours 0x0032 077 077 000 Old_age
Always - 17321
10 Spin_Retry_Count 0x0032 100 253 000 Old_age
Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 86
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age
Always - 42
193 Load_Cycle_Count 0x0032 193 193 000 Old_age
Always - 22236
194 Temperature_Celsius 0x0022 109 104 000 Old_age
Always - 34
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age
Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age
Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@debianbase:/# smartctl -a /dev/sde1
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-3-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD10EFRX-68FYTN0
Serial Number: WD-WCC4J6XRY5AN
LU WWN Device Id: 5 0014ee 20cd940c6
Firmware Version: 82.00A82
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Apr 28 15:17:28 2018 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (13440) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 153) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail
Always - 0
3 Spin_Up_Time 0x0027 134 129 021 Pre-fail
Always - 4266
4 Start_Stop_Count 0x0032 100 100 000 Old_age
Always - 89
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age
Always - 0
9 Power_On_Hours 0x0032 077 077 000 Old_age
Always - 17323
10 Spin_Retry_Count 0x0032 100 253 000 Old_age
Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 87
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age
Always - 43
193 Load_Cycle_Count 0x0032 193 193 000 Old_age
Always - 22223
194 Temperature_Celsius 0x0022 106 099 000 Old_age
Always - 37
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age
Always - 1
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age
Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@debianbase:/# smartctl -a /dev/sdf1
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-3-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD10EFRX-68FYTN0
Serial Number: WD-WCC4J4XV62F4
LU WWN Device Id: 5 0014ee 20cd9d7d1
Firmware Version: 82.00A82
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Apr 28 15:17:36 2018 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (13320) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 152) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail
Always - 0
3 Spin_Up_Time 0x0027 138 135 021 Pre-fail
Always - 4075
4 Start_Stop_Count 0x0032 100 100 000 Old_age
Always - 102
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age
Always - 0
9 Power_On_Hours 0x0032 080 080 000 Old_age
Always - 14912
10 Spin_Retry_Count 0x0032 100 100 000 Old_age
Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 85
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age
Always - 42
193 Load_Cycle_Count 0x0032 193 193 000 Old_age
Always - 22188
194 Temperature_Celsius 0x0022 108 102 000 Old_age
Always - 35
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age
Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age
Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@debianbase:/#
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
