I was reshaping/growing my array when it died. Computer came back up
but array wouldn't assemble.
I looked around and saw some commands on how to assemble without the
one drive that looked like it was kicked off sometime ago that I did
not realize (I used --assemble --force --verbose)
I kept getting the error that there were 6 drives, 1 rebuilding, and
not enough to get the array up. I unplugged the one drive that had the
incorrect superblock and ran "mdadm -A -R".
It ran and looked like it was resuming reshaping but it got really
slow - like 7 years slow.
I killed the process, rebooted the machine, and it just auto
reassembled the array and automounted it on boot.
Am in the process of backup right now.
And yes, the drive/array is mounted.
mdadm version 3.3, september 2013
Below is the updated mdadm examine info followed by smartctl (note
that the sd* have changed from the earlier post, likely because I
unplugged that drive):
/dev/sdb:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x45
Array UUID : f7333d4f:8300969d:55148d64:93c8afc8
Name : livingrm-server:2 (local to host livingrm-server)
Creation Time : Thu Jun 30 07:57:36 2016
Raid Level : raid5
Raid Devices : 8
Avail Dev Size : 7813775024 (3725.90 GiB 4000.65 GB)
Array Size : 27348210176 (26081.29 GiB 28004.57 GB)
Used Dev Size : 7813774336 (3725.90 GiB 4000.65 GB)
Data Offset : 262144 sectors
New Offset : 254976 sectors
Super Offset : 8 sectors
State : clean
Device UUID : 2df0b319:bdb18eee:27b318ec:da55d53d
Internal Bitmap : 8 sectors from superblock
Reshape pos'n : 39348736 (37.53 GiB 40.29 GB)
Delta Devices : 1 (7->8)
Update Time : Fri Nov 10 09:17:35 2017
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : d2b7f433 - correct
Events : 651498
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 6
Array State : AAAAAAA. ('A' == active, '.' == missing, 'R' == replacing)
/dev/sdc:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x45
Array UUID : f7333d4f:8300969d:55148d64:93c8afc8
Name : livingrm-server:2 (local to host livingrm-server)
Creation Time : Thu Jun 30 07:57:36 2016
Raid Level : raid5
Raid Devices : 8
Avail Dev Size : 7813775024 (3725.90 GiB 4000.65 GB)
Array Size : 27348210176 (26081.29 GiB 28004.57 GB)
Used Dev Size : 7813774336 (3725.90 GiB 4000.65 GB)
Data Offset : 262144 sectors
New Offset : 254976 sectors
Super Offset : 8 sectors
State : clean
Device UUID : f1a790a9:98e01257:d9ab257d:95c8f1fc
Internal Bitmap : 8 sectors from superblock
Reshape pos'n : 39348736 (37.53 GiB 40.29 GB)
Delta Devices : 1 (7->8)
Update Time : Fri Nov 10 09:17:35 2017
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : 1b42463e - correct
Events : 651498
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 4
Array State : AAAAAAA. ('A' == active, '.' == missing, 'R' == replacing)
/dev/sdd:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x45
Array UUID : f7333d4f:8300969d:55148d64:93c8afc8
Name : livingrm-server:2 (local to host livingrm-server)
Creation Time : Thu Jun 30 07:57:36 2016
Raid Level : raid5
Raid Devices : 8
Avail Dev Size : 7813775024 (3725.90 GiB 4000.65 GB)
Array Size : 27348210176 (26081.29 GiB 28004.57 GB)
Used Dev Size : 7813774336 (3725.90 GiB 4000.65 GB)
Data Offset : 262144 sectors
New Offset : 254976 sectors
Super Offset : 8 sectors
State : clean
Device UUID : 6f44eba1:29d246a4:c5e8312e:bac00a7b
Internal Bitmap : 8 sectors from superblock
Reshape pos'n : 39348736 (37.53 GiB 40.29 GB)
Delta Devices : 1 (7->8)
Update Time : Fri Nov 10 09:17:35 2017
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : 8ff6095a - correct
Events : 651498
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 1
Array State : AAAAAAA. ('A' == active, '.' == missing, 'R' == replacing)
/dev/sde:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x47
Array UUID : f7333d4f:8300969d:55148d64:93c8afc8
Name : livingrm-server:2 (local to host livingrm-server)
Creation Time : Thu Jun 30 07:57:36 2016
Raid Level : raid5
Raid Devices : 8
Avail Dev Size : 7813775024 (3725.90 GiB 4000.65 GB)
Array Size : 27348210176 (26081.29 GiB 28004.57 GB)
Used Dev Size : 7813774336 (3725.90 GiB 4000.65 GB)
Data Offset : 262144 sectors
New Offset : 254976 sectors
Super Offset : 8 sectors
Recovery Offset : 11264816 sectors
State : clean
Device UUID : 109b7a2f:0529794c:2cf95cc1:d6c0bd6b
Internal Bitmap : 8 sectors from superblock
Reshape pos'n : 39348736 (37.53 GiB 40.29 GB)
Delta Devices : 1 (7->8)
Update Time : Fri Nov 10 09:17:35 2017
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : 4a41aa92 - correct
Events : 651498
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 2
Array State : AAAAAAA. ('A' == active, '.' == missing, 'R' == replacing)
/dev/sdf:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x45
Array UUID : f7333d4f:8300969d:55148d64:93c8afc8
Name : livingrm-server:2 (local to host livingrm-server)
Creation Time : Thu Jun 30 07:57:36 2016
Raid Level : raid5
Raid Devices : 8
Avail Dev Size : 7813775024 (3725.90 GiB 4000.65 GB)
Array Size : 27348210176 (26081.29 GiB 28004.57 GB)
Used Dev Size : 7813774336 (3725.90 GiB 4000.65 GB)
Data Offset : 262144 sectors
New Offset : 254976 sectors
Super Offset : 8 sectors
State : clean
Device UUID : deb04cea:d6530966:6c70ca90:bebb143e
Internal Bitmap : 8 sectors from superblock
Reshape pos'n : 39348736 (37.53 GiB 40.29 GB)
Delta Devices : 1 (7->8)
Update Time : Fri Nov 10 09:17:35 2017
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : bfbc7a25 - correct
Events : 651498
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 5
Array State : AAAAAAA. ('A' == active, '.' == missing, 'R' == replacing)
/dev/sdg:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x45
Array UUID : f7333d4f:8300969d:55148d64:93c8afc8
Name : livingrm-server:2 (local to host livingrm-server)
Creation Time : Thu Jun 30 07:57:36 2016
Raid Level : raid5
Raid Devices : 8
Avail Dev Size : 7813775024 (3725.90 GiB 4000.65 GB)
Array Size : 27348210176 (26081.29 GiB 28004.57 GB)
Used Dev Size : 7813774336 (3725.90 GiB 4000.65 GB)
Data Offset : 262144 sectors
New Offset : 254976 sectors
Super Offset : 8 sectors
State : clean
Device UUID : 15d85573:6e78f040:8c028ef3:d1301f9d
Internal Bitmap : 8 sectors from superblock
Reshape pos'n : 39348736 (37.53 GiB 40.29 GB)
Delta Devices : 1 (7->8)
Update Time : Fri Nov 10 09:17:35 2017
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : e57acd25 - correct
Events : 651498
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 3
Array State : AAAAAAA. ('A' == active, '.' == missing, 'R' == replacing)
/dev/sdh:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x45
Array UUID : f7333d4f:8300969d:55148d64:93c8afc8
Name : livingrm-server:2 (local to host livingrm-server)
Creation Time : Thu Jun 30 07:57:36 2016
Raid Level : raid5
Raid Devices : 8
Avail Dev Size : 7813775024 (3725.90 GiB 4000.65 GB)
Array Size : 27348210176 (26081.29 GiB 28004.57 GB)
Used Dev Size : 7813774336 (3725.90 GiB 4000.65 GB)
Data Offset : 262144 sectors
New Offset : 254976 sectors
Super Offset : 8 sectors
State : clean
Device UUID : 64d5961e:230e558c:3748b561:a7c6ab8c
Internal Bitmap : 8 sectors from superblock
Reshape pos'n : 39348736 (37.53 GiB 40.29 GB)
Delta Devices : 1 (7->8)
Update Time : Fri Nov 10 09:17:35 2017
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : 39d43ba7 - correct
Events : 651498
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 0
Array State : AAAAAAA. ('A' == active, '.' == missing, 'R' == replacing)
------
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-98-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD40EFRX-68WT0N0
Serial Number: WD-WCC4E2VKP3SV
LU WWN Device Id: 5 0014ee 2620754c8
Firmware Version: 82.00A82
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Nov 10 09:24:03 2017 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (51120) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 512) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x703d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail
Always - 0
3 Spin_Up_Time 0x0027 191 183 021 Pre-fail
Always - 7441
4 Start_Stop_Count 0x0032 100 100 000 Old_age
Always - 182
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age
Always - 0
9 Power_On_Hours 0x0032 082 082 000 Old_age
Always - 13243
10 Spin_Retry_Count 0x0032 100 100 000 Old_age
Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 182
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age
Always - 113
193 Load_Cycle_Count 0x0032 192 192 000 Old_age
Always - 26737
194 Temperature_Celsius 0x0022 118 101 000 Old_age
Always - 34
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age
Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age
Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-98-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD40EFRX-68WT0N0
Serial Number: WD-WCC4E4JNHEC6
LU WWN Device Id: 5 0014ee 2614842c3
Firmware Version: 82.00A82
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Fri Nov 10 09:24:14 2017 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (53940) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 539) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x703d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail
Always - 0
3 Spin_Up_Time 0x0027 189 180 021 Pre-fail
Always - 7516
4 Start_Stop_Count 0x0032 100 100 000 Old_age
Always - 214
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age
Always - 0
9 Power_On_Hours 0x0032 076 076 000 Old_age
Always - 18057
10 Spin_Retry_Count 0x0032 100 100 000 Old_age
Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 214
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age
Always - 128
193 Load_Cycle_Count 0x0032 189 189 000 Old_age
Always - 33162
194 Temperature_Celsius 0x0022 117 092 000 Old_age
Always - 35
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age
Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age
Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-98-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD40EFRX-68WT0N0
Serial Number: WD-WCC4E2ZYE8AN
LU WWN Device Id: 5 0014ee 20bf26ce9
Firmware Version: 82.00A82
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Fri Nov 10 09:24:17 2017 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (54960) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 550) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x703d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail
Always - 0
3 Spin_Up_Time 0x0027 186 178 021 Pre-fail
Always - 7658
4 Start_Stop_Count 0x0032 100 100 000 Old_age
Always - 214
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age
Always - 0
9 Power_On_Hours 0x0032 076 076 000 Old_age
Always - 18060
10 Spin_Retry_Count 0x0032 100 100 000 Old_age
Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 214
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age
Always - 121
193 Load_Cycle_Count 0x0032 189 189 000 Old_age
Always - 33798
194 Temperature_Celsius 0x0022 117 098 000 Old_age
Always - 35
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age
Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age
Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-98-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD40EFRX-68N32N0
Serial Number: WD-WCC7K7PZ7R6Z
LU WWN Device Id: 5 0014ee 26410129e
Firmware Version: 82.00A82
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Fri Nov 10 09:24:20 2017 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (46440) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 492) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 253 051 Pre-fail
Always - 0
3 Spin_Up_Time 0x0027 100 253 021 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 000 Old_age
Always - 5
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age
Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age
Always - 320
10 Spin_Retry_Count 0x0032 100 253 000 Old_age
Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 5
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age
Always - 2
193 Load_Cycle_Count 0x0032 200 200 000 Old_age
Always - 61
194 Temperature_Celsius 0x0022 118 114 000 Old_age
Always - 32
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age
Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age
Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-98-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD40EFRX-68WT0N0
Serial Number: WD-WCC4E4JNHKL9
LU WWN Device Id: 5 0014ee 2b69e186b
Firmware Version: 82.00A82
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Fri Nov 10 09:24:25 2017 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (55260) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 552) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x703d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail
Always - 1
3 Spin_Up_Time 0x0027 187 180 021 Pre-fail
Always - 7616
4 Start_Stop_Count 0x0032 100 100 000 Old_age
Always - 675
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age
Always - 0
9 Power_On_Hours 0x0032 074 074 000 Old_age
Always - 19242
10 Spin_Retry_Count 0x0032 100 100 000 Old_age
Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 263
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age
Always - 163
193 Load_Cycle_Count 0x0032 188 188 000 Old_age
Always - 36231
194 Temperature_Celsius 0x0022 116 091 000 Old_age
Always - 36
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age
Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age
Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-98-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD40EFRX-68WT0N0
Serial Number: WD-WCC4E4K2JPZT
LU WWN Device Id: 5 0014ee 2b510b64f
Firmware Version: 80.00A80
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Nov 10 09:24:28 2017 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (52320) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 523) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x703d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail
Always - 0
3 Spin_Up_Time 0x0027 189 179 021 Pre-fail
Always - 7541
4 Start_Stop_Count 0x0032 098 098 000 Old_age
Always - 2626
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age
Always - 0
9 Power_On_Hours 0x0032 064 064 000 Old_age
Always - 26956
10 Spin_Retry_Count 0x0032 100 100 000 Old_age
Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 312
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age
Always - 185
193 Load_Cycle_Count 0x0032 188 188 000 Old_age
Always - 38926
194 Temperature_Celsius 0x0022 117 092 000 Old_age
Always - 35
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 192 000 Old_age
Always - 14
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age
Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-98-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD40EFRX-68WT0N0
Serial Number: WD-WCC4E4VTX9TP
LU WWN Device Id: 5 0014ee 261485dc4
Firmware Version: 82.00A82
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Nov 10 09:24:31 2017 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (54780) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 548) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x703d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail
Always - 0
3 Spin_Up_Time 0x0027 189 181 021 Pre-fail
Always - 7516
4 Start_Stop_Count 0x0032 100 100 000 Old_age
Always - 212
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age
Always - 0
9 Power_On_Hours 0x0032 076 076 000 Old_age
Always - 18057
10 Spin_Retry_Count 0x0032 100 100 000 Old_age
Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 212
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age
Always - 122
193 Load_Cycle_Count 0x0032 189 189 000 Old_age
Always - 33611
194 Temperature_Celsius 0x0022 118 092 000 Old_age
Always - 34
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age
Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age
Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
On Fri, Nov 10, 2017 at 5:13 AM, Mark Knecht <markknecht@xxxxxxxxx> wrote:
> On Fri, Nov 10, 2017 at 6:01 AM, Phil Turmel <philip@xxxxxxxxxx> wrote:
>> Hi Jun-Kai,
>>
>> On 11/10/2017 06:31 AM, Wols Lists wrote:
>>> On 10/11/17 03:09, Jun-Kai Teoh wrote:
>>>> Hi all,
>>>>
>>>> I managed to get my RAID drive back up, content looks like it's still
>>>> there, but it's not resyncing or reshaping and my parity drive was
>>>> removed (I did it when I tried to get it back up).
>>
>> If you can see your content (mounted read-only, I hope), backup up
>> everything, in order from most critical to least critical.
>>
>>>> So what should I do now? I'm afraid of doing anything else at this point.
>>
>> Well, you need to provide more information. At least the mdadm -E
>> reports for all of the member devices. Including the "parity" device
>> you removed. (Parity is spread among all devices in a normal raid5
>> layout, so you may be suffering from a misunderstanding.)
>>
>
> Phil,
> Please reference the thread entitled
>
> "Raid 5 array down/missing - went through wiki steps"
>
> All the mdadm -E info and much more was reported there a week
> ago. Wols and I helped get him that far but neither of us was confident
> in giving instructions to get him further.
>
> Cheers,
> Mark
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
