Re: Is the LSI SAS9211-8i still the go to HBA?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/28/2017 03:52 AM, Johannes Truschnigg wrote:
On Thu, Sep 28, 2017 at 10:40:43AM +0200, Carsten Aulbert wrote:
Hi

On 09/28/17 10:34, Eyal Lebedinsky wrote:
[...]
So, is there another candidate for 8 way HBA for use with linux software
raid?
We operate a couple of SAS3008 based cards from Broadcom formerly known
as Avago formerly known as LSI ;)

E.g. the 9300-8i card which we flashed ourselves from IR to IT mode work
quite nicely without any complain at the moment.
Same here - just make sure to flash a recent-ish firmware image. The 3008 was
unusable garbage before the (iirc) "P8" release for us.

I have 9211 (for about 9 months). Had to flash IT firmware. It is a bit slow in enumerrating attached disks and sometimes kernel misses a disk or two at boot up that shows up afterwards. This kind of messes up md. I suspect this is more of the problem with ubuntu 14.04 I have, rather than md or 9211 problem. However, simple re-add fixes it. Since upgrade to newer version is a problem for me, I am just dealing with it. So, you may not even have this problem.

Ramesh

--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux