> On Fri, Sep 01, 2017 at 05:26:48PM +0800, Dennis Yang wrote: > > >On Mon, Aug 28, 2017 at 08:01:59PM +0800, Dennis Yang wrote: > > >> break_stripe_batch_list() did not preserve STRIPE_ON_UNPLUG_LIST which is > > >> set when a stripe_head gets queued to the stripe_head list maintained by > > >> raid5_plug_cb and waiting for releasing after blk_unplug(). > > >> > > >> In release_stripe_plug(), if a stripe_head has its STRIPE_ON_UNPLUG_LIST > > >> set, it indicates that this stripe_head is already in the raid5_plug_cb > > >> list and release_stripe() would be called instead to drop a reference > > >> count. Otherwise, the STRIPE_ON_UNPLUG_LIST bit would be set for this > > >> stripe_head and it will get queued into the raid5_plug_cb list. > > >> > > >> Without preserving STRIPE_ON_UNPLUG_LIST in break_stripe_batch_list(), > > >> a stripe_head could be re-added to the raid5_plug_cb list while it is > > >> currently on that list and waiting to be released. This would mess up > > >> the raid5_plug_cb and leads to soft/hard lockup in raid5_unplug() or > > >> kernel crash. > > > > > >Did you observe this? From my understanding, this is impossible. If a stripe is > > >in batch list (that's why we have break_stripe_batch_list), add_stripe_bio will > > >bail out (because sh->batch_head != NULL), so the stripe is never added into > > >plug list, hence has the STRIPE_ON_UNPLUG_LIST bit set. Am I missing anything? > > > > > >Thanks, > > >Shaohua > > > > It is hard to reproduce. Our storage exports 4 iscsi LUNs which are built on > > top of a dm-thin pool with 8 x SSD RAID6. Each two of these iscsi LUNs are > > connected to a windows server which runs 4 fio jobs with 16 threads and > > iodepth = 16. In this setup, we can get the following call trace after couples > > of hours. The stack dump basically shows that the raid5_unplug is holding the > > conf->device_lock for a very long time. After adding some debug traces, we can > > confirm that the raid5_plug_cb->list is corrupted which sometimes leads to > > infinite loop in raid5_unplug. > > > > I didn't notice that add_stripe_bio will bail out if the stripe_head is in > > someone's batch list, but I am wondering if the following scenario will still > > happen. If a stripe_head A is added to another stripe_head B's batch list, in > > this case A will have its batch_head != NULL and be added into the plug list. > > After that, stripe_head B gets handled and called break_stripe_batch_list() to > > reset all the batched stripe_head(including A which is still on the plug list)'s > > state and reset their batch_head to NULL. Before the plug list gets processed, > > if there is another write request comes in and get stripe_head A, A will have > > its batch_head == NULL (cleared by calling break_stripe_batch_list() on B) and > > be added to plug list once again. > > > > Since we have the environment which can reproduce this issue in 6 hours, if > > there is anything we can do to help resolve this issue, we are more than > > willing to help. > > yes, I think you are right. If the stripe is on one thread's plug list, the > thread doesn't do unplug till the stripe is handled (because it's part of a > batch), we will have the stripe in plug list but not have the bit set. Can you > resend the patch with description what happens? BTW, does the patch fix your > issue? > > Thanks, > Shaohua Sure, I will resend a patch to you with updated commit message. We have already run the same stress test on the same environment for 6 days without any error. Since the test cannot run more than 6 hours before this patch, I think it does fix my issue. Thanks, Dennis > > > > Thanks, > > Dennis > > > > [ 4481.493998] BUG: spinlock lockup suspected on CPU#10, md1_raid6/5497 > > [ 4481.501109] lock: 0xffff88102b242888, .magic: dead4ead, .owner: kworker/u24:2/22322, .owner_cpu: 0 > > [ 4481.511231] CPU: 10 PID: 5497 Comm: md1_raid6 Tainted: P W O 4.2.8 #7 > > [ 4481.519504] Hardware name: Default string Default string/Default string, BIOS QY38AR06 01/24/2017 > > [ 4481.529429] ffff88102b242888 ffff881014967c78 ffffffff81c933b6 0000000000000007 > > [ 4481.537739] ffff8805c9720a00 ffff881014967c98 ffffffff810d2c20 ffff88102b242888 > > [ 4481.546048] 0000000082d0f7c8 ffff881014967cc8 ffffffff810d2d9b ffff88102b242888 > > [ 4481.554357] Call Trace: > > [ 4481.557093] [<ffffffff81c933b6>] dump_stack+0x4c/0x65 > > [ 4481.562840] [<ffffffff810d2c20>] spin_dump+0x80/0xd0 > > [ 4481.568489] [<ffffffff810d2d9b>] do_raw_spin_lock+0x9b/0x120 > > [ 4481.574916] [<ffffffff81ca14d1>] _raw_spin_lock_irq+0x41/0x50 > > [ 4481.581443] [<ffffffff816d2204>] ? raid5d+0x64/0x790 > > [ 4481.587091] [<ffffffff816d2204>] raid5d+0x64/0x790 > > [ 4481.592546] [<ffffffff810c35c6>] ? finish_wait+0x46/0x80 > > [ 4481.598583] [<ffffffff810c35e8>] ? finish_wait+0x68/0x80 > > [ 4481.604621] [<ffffffff816d8d2e>] md_thread+0x13e/0x150 > > [ 4481.610464] [<ffffffff810c37e0>] ? wait_woken+0xb0/0xb0 > > [ 4481.616405] [<ffffffff816d8bf0>] ? find_pers+0x80/0x80 > > [ 4481.622249] [<ffffffff8109eed5>] kthread+0x105/0x120 > > [ 4481.627899] [<ffffffff8109edd0>] ? kthread_create_on_node+0x220/0x220 > > [ 4481.635201] [<ffffffff81ca218f>] ret_from_fork+0x3f/0x70 > > [ 4481.641239] [<ffffffff8109edd0>] ? kthread_create_on_node+0x220/0x220 > > [ 4481.654638] NMI backtrace for cpu 0 > > [ 4481.658536] CPU: 0 PID: 22322 Comm: kworker/u24:2 Tainted: P W O 4.2.8 #7 > > [ 4481.667198] Hardware name: Default string Default string/Default string, BIOS QY38AR06 01/24/2017 > > [ 4481.677124] Workqueue: writeback wb_workfn (flush-252:15) > > [ 4481.683160] task: ffff8805c9720a00 ti: ffff8805c84f8000 task.ti: ffff8805c84f8000 > > [ 4481.691531] RIP: 0010:[<ffffffff816cd9f1>] [<ffffffff816cd9f1>] raid5_unplug+0x71/0x270 > > [ 4481.700582] RSP: 0018:ffff8805c84fb938 EFLAGS: 00000046 > > [ 4481.706521] RAX: ffff8805cd2ce258 RBX: ffff881038557280 RCX: ffff8805cd2ce258 > > [ 4481.714502] RDX: ffff8805cd2ce258 RSI: ffff8805cd2ce248 RDI: ffff88102b242000 > > [ 4481.722483] RBP: ffff8805c84fb978 R08: ffffffff81e0a1c0 R09: 0000000000000000 > > [ 4481.730464] R10: 0000000000000000 R11: 00000000071775d0 R12: 00000000b921e53c > > [ 4481.738445] R13: ffff88102b242000 R14: ffff8810385572a0 R15: ffff88102feec000 > > [ 4481.746427] FS: 0000000000000000(0000) GS:ffff88107fc00000(0000) knlGS:0000000000000000 > > [ 4481.755477] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > > [ 4481.761904] CR2: 00007fb7bf2d2000 CR3: 0000000fff8df000 CR4: 00000000003406f0 > > [ 4481.769886] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > > [ 4481.777868] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > > [ 4481.785848] Stack: > > [ 4481.788094] 00000000f835a020 ffff88102b242888 ffff8805c84fbb48 ffff8805c84fb9a8 > > [ 4481.796366] 0000000000000000 ffff8805c84fba28 ffff8805c84fba48 ffff8805c84fb998 > > [ 4481.804640] ffff8805c84fb9e8 ffffffff81463c8b ffff8805c84fb9d8 ffffffff81461bb2 > > [ 4481.812912] Call Trace: > > [ 4481.815644] [<ffffffff81463c8b>] blk_flush_plug_list+0x9b/0x230 > > [ 4481.822361] [<ffffffff81461bb2>] ? submit_bio+0x62/0x150 > > [ 4481.828398] [<ffffffff81464364>] blk_finish_plug+0x24/0x40 > > [ 4481.834628] [<ffffffff812292c3>] mpage_writepages+0x73/0x90 > > [ 4481.840956] [<ffffffff81222f90>] ? I_BDEV+0x10/0x10 > > [ 4481.846506] [<ffffffff81225380>] qnap_blkdev_writepages+0x10/0x20 > > [ 4481.853418] [<ffffffff81188af9>] do_writepages+0x59/0x70 > > [ 4481.859455] [<ffffffff81213874>] __writeback_single_inode+0x74/0xa50 > > [ 4481.866658] [<ffffffff81214a41>] writeback_sb_inodes+0x2f1/0x680 > > [ 4481.873472] [<ffffffff81214e54>] __writeback_inodes_wb+0x84/0xb0 > > [ 4481.880287] [<ffffffff812151a9>] wb_writeback+0x329/0x6e0 > > [ 4482.914006] NMI backtrace for cpu 5 > > [ 4482.917906] CPU: 5 PID: 26333 Comm: kworker/u24:5 Tainted: P W O 4.2.8 #7 > > [ 4482.926567] Hardware name: Default string Default string/Default string, BIOS QY38AR06 01/24/2017 > > [ 4482.936492] Workqueue: writeback wb_workfn (flush-252:14) > > [ 4482.942529] task: ffff8805c7a74340 ti: ffff8805c6228000 task.ti: ffff8805c6228000 > > [ 4482.950898] RIP: 0010:[<ffffffff8149cfd7>] [<ffffffff8149cfd7>] delay_tsc+0x17/0x70 > > [ 4482.959558] RSP: 0018:ffff8805c622b368 EFLAGS: 00000082 > > [ 4482.965498] RAX: 00000000dc0ef28f RBX: ffff88102b242888 RCX: 00000000dc0ef259 > > [ 4482.973479] RDX: 0000000000003c68 RSI: 0000000000000005 RDI: 0000000000000001 > > [ 4482.981460] RBP: ffff8805c622b368 R08: 0000000000000001 R09: 0000000000000001 > > [ 4482.989441] R10: 0000000000000000 R11: 0000000000000007 R12: 00000000763815f7 > > [ 4482.997422] R13: 0000000000000001 R14: 0000000082d0f7c8 R15: ffff88102feec000 > > [ 4483.005403] FS: 0000000000000000(0000) GS:ffff88107fca0000(0000) knlGS:0000000000000000 > > [ 4483.014459] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > > [ 4483.020876] CR2: 00007f54d805a030 CR3: 0000001006c20000 CR4: 00000000003406e0 > > [ 4483.028858] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > > [ 4483.036840] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > > [ 4483.044822] Stack: > > [ 4483.047069] ffff8805c622b378 ffffffff8149cf2a ffff8805c622b3a8 ffffffff810d2d87 > > [ 4483.055341] ffff88102b242888 0000000000000000 ffff88102b242000 ffff881007d702a0 > > [ 4483.063613] ffff8805c622b3d8 ffffffff81ca14d1 ffffffff816cd9ca 0000000000000000 > > [ 4483.071885] Call Trace: > > [ 4483.074617] [<ffffffff8149cf2a>] __delay+0xa/0x10 > > [ 4483.079973] [<ffffffff810d2d87>] do_raw_spin_lock+0x87/0x120 > > [ 4483.086399] [<ffffffff81ca14d1>] _raw_spin_lock_irq+0x41/0x50 > > [ 4483.092920] [<ffffffff816cd9ca>] ? raid5_unplug+0x4a/0x270 > > [ 4483.099151] [<ffffffff816cd9ca>] raid5_unplug+0x4a/0x270 > > [ 4483.105188] [<ffffffff81463c8b>] blk_flush_plug_list+0x9b/0x230 > > [ 4483.111907] [<ffffffff81c9bf9d>] schedule+0x6d/0x90 > > [ 4483.117459] [<ffffffff816c9910>] __get_active_stripe.constprop.61+0x750/0x970 > > [ 4483.125539] [<ffffffff810c37e0>] ? wait_woken+0xb0/0xb0 > > [ 4483.131480] [<ffffffff816c9d2a>] make_request+0x1fa/0xe30 > > [ 4483.137616] [<ffffffff816ddc8e>] ? md_make_request+0x1fe/0x4b0 > > [ 4483.144238] [<ffffffff810c37e0>] ? wait_woken+0xb0/0xb0 > > [ 4483.150179] [<ffffffff816ddc52>] ? md_make_request+0x1c2/0x4b0 > > [ 4483.156800] [<ffffffff816ddc8e>] md_make_request+0x1fe/0x4b0 > > [ 4483.163227] [<ffffffff816ddade>] ? md_make_request+0x4e/0x4b0 > > [ 4483.169750] [<ffffffff816edd43>] ? dm_make_request+0x73/0x110 > > [ 4483.176273] [<ffffffff81461b0e>] generic_make_request+0xce/0x110 > > > > -- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
