[md PATCH 2/2] md: fix test in md_write_start()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



md_write_start() needs to clear the in_sync flag is it is set, or if
there might be a race with set_in_sync() such that the later will
set it very soon.  In the later case it is sufficient to take the
spinlock to synchronize with set_in_sync(), and then set the flag
if needed.

The current test is incorrect.
It should be:
  if "flag is set" or "race is possible"

"flag is set" is trivially "mddev->in_sync".
"race is possible" should be tested by "mddev->sync_checkers".

If sync_checkers is 0, then there can be no race.  set_in_sync() will
wait in percpu_ref_switch_to_atomic_sync() for an RCU grace period,
and as md_write_start() holds the rcu_read_lock(), set_in_sync() will
be sure ot see the update to writes_pending.

If sync_checkers is > 0, there could be race.  If md_write_start()
happened entirely between
		if (!mddev->in_sync &&
		    percpu_ref_is_zero(&mddev->writes_pending)) {
and
			mddev->in_sync = 1;
in set_in_sync(), then it would not see that is_sync had been set,
and set_in_sync() would not see that writes_pending had been
incremented.

This bug means that in_sync is sometimes not set when it should be.
Consequently there is a small chance that the array will be marked as
"clean" when in fact it is inconsistent.

Fixes: 4ad23a976413 ("MD: use per-cpu counter for writes_pending")
cc: stable@xxxxxxxxxxxxxxx (v4.12+)
Signed-off-by: NeilBrown <neilb@xxxxxxxx>
---
 drivers/md/md.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index d84aceede1cb..e4ba95f6cd59 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7996,7 +7996,7 @@ bool md_write_start(struct mddev *mddev, struct bio *bi)
 	if (mddev->safemode == 1)
 		mddev->safemode = 0;
 	/* sync_checkers is always 0 when writes_pending is in per-cpu mode */
-	if (mddev->in_sync || !mddev->sync_checkers) {
+	if (mddev->in_sync || mddev->sync_checkers) {
 		spin_lock(&mddev->lock);
 		if (mddev->in_sync) {
 			mddev->in_sync = 0;


--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux