Re: Disk Monitoring

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





Am 29.06.2017 um 12:25 schrieb Gandalf Corvotempesta:
2017-06-29 12:20 GMT+02:00 Mateusz Korniak <mateusz-lists@xxxxxxxxxxxxxx>:
Also SMART long test should perform "read/verify scan of all of the user data
area", so it is good idea to do it periodically and monitor results.

I'm already using this, but is not very reliable.
I had some disks failed by hw raid controller due to unreadable sector
(3/11) still passing the smart long test
and some failed smart long test still passing the hw raid check

hence you do both - in any case, software-raid as well as hardware-raid

* scheduled smart check
* scheduled scrub

i had enough cases where while the scrub was running smartd alerted about a disk going bad - at the end of the day it don't matter which of both cries, the point is that you get (hopefully) a alert that you should replace a specific disk before a second one starts to go bad
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux