RE: mismatch_cnt > 0 during initial sync?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> From: NeilBrown [mailto:neilb@xxxxxxxx]
> Sent: Sunday, June 18, 2017 2:35 PM
> Subject: Re: mismatch_cnt > 0 during initial sync?
> 
> 
> From the perspective of md, the initial sync is no different from any
other sync.  It
> will count the number of mismatches that it finds and fixes.
> 

Should a sync always fix a mismatch it encounters?   I have a RAID1 with 3
disks.  Sometimes I need to replace one disk and after adding a replacement
disk syslog indicates  "RebuildFinished event detected on md device
/dev/md/2, component device  mismatches found: 256 (on raid level 1)" but
says nothing about fixing it.

cat /sys/block/md2/md/last_sync_action
recovery

mdadm -V
mdadm - v3.3 - 3rd September 2013


Thank you,
Pete

--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux