On Sat, Apr 08 2017, LM wrote: > Hi, > > I have a 4 disk RAID5, the used dev size is 640.05 GB. Now I want to > replace the 4 disks by 4 disks with a size of 2TB each. > > As far as I understand the man page, this can be achieved by replacing > the devices one after another and for each device rebuild the degraded > array with: > > mdadm /dev/md0 --add /dev/sdX1 > > Then the level change can be done together with growing the array: > > mdadm --grow /dev/md0 --level=raid6 --backup-file=/root/backup-md0 > > Does this work? > > I am asking if it works, because the man page also says: > >> mdadm --grow /dev/md4 --level=6 --backup-file=/root/backup-md4 >> The array /dev/md4 which is currently a RAID5 array will >> be converted to RAID6. There should normally already be >> a spare drive attached to the array as a RAID6 needs one >> more drive than a matching RAID5. > > And in my case only the size of disks is increased, not their number. > Yes, it probably works, and you probably don't need a backup file. Though you might need to explicitly tell mdadm to keep the number of devices unchanged by specifying "--raid-disk=4". You probably aren't very encouraged that I say "probably" and "might", and this is deliberate. I recommend that you crate 4 10Meg files, use losetup to create 10M devices, and build a RAID5 over them with --size=5M. Then try the --grow --level=6 command, and see what happens. If you mess up, you can easily start from scratch and try again. If it works, you can have some confidence that the same process will have the same result on real devices. NeilBrown
Attachment:
signature.asc
Description: PGP signature
