Re: [PATCHv2 0/2] mdadm: setting device role of raid1 disk with failfast

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,
Is nobody interested in those patches?

On Mon, Mar 20, 2017 at 10:51:55AM +0100, Gioh Kim wrote:
> Hi,
> 
> I've found a case that failfast option of mdadm set a disk faulty wrongly.
> Following is my test case.
> 
> mdadm --create /dev/md100 -l 1 --failfast -e 1.2 -n 2 /dev/vdb /dev/vdc
> mdadm /dev/md100 -a --failfast /dev/vdd
> 
> If I use failfast option, the vdd disk was faulty wrongly.
> If not, it was spare.
> 
> This patch fixes a corner case for setting device role and
> prints device role if it's faulty.
> This patch is based on "mdadm - v4.0-8-g72b616a - 2017-03-07".
> 
> v2: fix a typo of v1
> 
> Gioh Kim (1):
>   super1: ignore failfast flag for setting device role
> 
> Jack Wang (1):
>   super1: check and output faulty dev role
> 
>  super1.c | 14 +++++++++-----
>  1 file changed, 9 insertions(+), 5 deletions(-)
> 
> -- 
> 2.5.0
> 

-- 
Best regards,
Gi-Oh Kim
TEL: 0176 2697 8962
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux