2017-02-28 22:08 GMT+01:00 Shaohua Li <shli@xxxxxx>:
> Neil Brown pointed out a potential deadlock in raid 10 code with
> bio_split/chain. The raid1 code could have the same issue, but recent
> barrier rework makes it less likely to happen. The deadlock happens in
> below sequence:
>
> 1. generic_make_request(bio), this will set current->bio_list
> 2. raid10_make_request will split bio to bio1 and bio2
> 3. __make_request(bio1), wait_barrer, add underlayer disk bio to
> current->bio_list
> 4. __make_request(bio2), wait_barrer
>
> If raise_barrier happens between 3 & 4, since wait_barrier runs at 3,
> raise_barrier waits for IO completion from 3. And since raise_barrier
> sets barrier, 4 waits for raise_barrier. But IO from 3 can't be
> dispatched because raid10_make_request() doesn't finished yet.
>
> The solution is to adjust the IO ordering. Quotes from Neil:
> "
> It is much safer to:
>
> if (need to split) {
> split = bio_split(bio, ...)
> bio_chain(...)
> make_request_fn(split);
> generic_make_request(bio);
> } else
> make_request_fn(mddev, bio);
>
> This way we first process the initial section of the bio (in 'split')
> which will queue some requests to the underlying devices. These
> requests will be queued in generic_make_request.
> Then we queue the remainder of the bio, which will be added to the end
> of the generic_make_request queue.
> Then we return.
> generic_make_request() will pop the lower-level device requests off the
> queue and handle them first. Then it will process the remainder
> of the original bio once the first section has been fully processed.
> "
>
> Cc: Coly Li <colyli@xxxxxxx>
> Cc: 王金浦 <jinpuwang@xxxxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx (v3.14+, only the raid10 part)
> Suggested-by: NeilBrown <neilb@xxxxxxxx>
> Signed-off-by: Shaohua Li <shli@xxxxxx>
> ---
> drivers/md/raid1.c | 25 +++++++++++++++++++++++--
> drivers/md/raid10.c | 18 ++++++++++++++++++
> 2 files changed, 41 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
> index 551d654..3c5933b 100644
> --- a/drivers/md/raid1.c
> +++ b/drivers/md/raid1.c
> @@ -1584,9 +1584,30 @@ static void raid1_make_request(struct mddev *mddev, struct bio *bio)
> split = bio;
> }
>
> - if (bio_data_dir(split) == READ)
> + if (bio_data_dir(split) == READ) {
> raid1_read_request(mddev, split);
> - else
> +
> + /*
> + * If a bio is splitted, the first part of bio will
> + * pass barrier but the bio is queued in
> + * current->bio_list (see generic_make_request). If
> + * there is a raise_barrier() called here, the second
> + * part of bio can't pass barrier. But since the first
> + * part bio isn't dispatched to underlaying disks yet,
> + * the barrier is never released, hence raise_barrier
> + * will alays wait. We have a deadlock.
> + * Note, this only happens in read path. For write
> + * path, the first part of bio is dispatched in a
> + * schedule() call (because of blk plug) or offloaded
> + * to raid10d.
> + * Quitting from the function immediately can change
> + * the bio order queued in bio_list and avoid the deadlock.
> + */
> + if (split != bio) {
> + generic_make_request(bio);
> + break;
> + }
> + } else
> raid1_write_request(mddev, split);
> } while (split != bio);
> }
> diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
> index c4db6d1..b1b1f98 100644
> --- a/drivers/md/raid10.c
> +++ b/drivers/md/raid10.c
> @@ -1584,7 +1584,25 @@ static void raid10_make_request(struct mddev *mddev, struct bio *bio)
> split = bio;
> }
>
> + /*
> + * If a bio is splitted, the first part of bio will pass
> + * barrier but the bio is queued in current->bio_list (see
> + * generic_make_request). If there is a raise_barrier() called
> + * here, the second part of bio can't pass barrier. But since
> + * the first part bio isn't dispatched to underlaying disks
> + * yet, the barrier is never released, hence raise_barrier will
> + * alays wait. We have a deadlock.
> + * Note, this only happens in read path. For write path, the
> + * first part of bio is dispatched in a schedule() call
> + * (because of blk plug) or offloaded to raid10d.
> + * Quitting from the function immediately can change the bio
> + * order queued in bio_list and avoid the deadlock.
> + */
> __make_request(mddev, split);
> + if (split != bio && bio_data_dir(bio) == READ) {
> + generic_make_request(bio);
> + break;
> + }
> } while (split != bio);
>
> /* In case raid10d snuck in to freeze_array */
> --
> 2.9.3
>
Looks good to me!
Reviewed-by: Jack Wang <jinpu.wang@xxxxxxxxxxxxxxxx>
Thanks!
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
