Hello all
I am trying to set up a raid 1 array using an SSD and a standard SAT
HDD drives. As I read, it's better to set the write-mostly flag to the
HDD partition of the array to keep SSD performance times.
This is the command I'm using:
# mdadm --create /dev/md1 -n 2 -l 1 --metadata=0.90 --bitmap=internal
/dev/nvme0n1p5 -W /dev/sda8 --write-behind
I expect seeing the (W) indicator in mdstat, but this is not showing:
# cat /proc/mdstat
Personalities : [raid1]
md1 : active raid1 sda8[1] nvme0n1p5[0]
52400064 blocks [2/2] [UU]
[>....................] resync = 0.3% (175936/52400064)
finish=9.8min speed=87968K/sec
unused devices: <none>
But if I force later on the flag by means of the sys FS handle, then
it does appear:
# cat /sys/block/md1/md/dev-sda8/state
in_sync
# echo writemostly > /sys/block/md1/md/dev-sda8/state
# cat /sys/block/md1/md/dev-sda8/state
in_sync,write_mostly
# cat /proc/mdstat
Personalities : [raid1]
md1 : active raid1 sda8[1](W) nvme0n1p5[0]
52400064 blocks [2/2] [UU]
[==>..................] resync = 11.0% (5806336/52400064)
finish=9.8min speed=78966K/sec
bitmap: 1/1 pages [4KB], 65536KB chunk
unused devices: <none>
How is it that the (W) is not showing in the first place?
BTW, this is the system being used:
# uname -a
Linux ubuntu 4.8.0-22-generic #24-Ubuntu SMP Sat Oct 8 09:15:00 UTC
2016 x86_64 x86_64 x86_64 GNU/Linu
Thanks and regards
Victor
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
