With write back cache, we use orig_page to do prexor. This patch
makes sure we read data into orig_page for it.
Flag R5_OrigPageUPTDODATE is added to make show when orig_page
has the latest data from raid disk.
Signed-off-by: Song Liu <songliubraving@xxxxxx>
---
drivers/md/raid5-cache.c | 2 ++
drivers/md/raid5.c | 37 ++++++++++++++++++++++++++++---------
drivers/md/raid5.h | 5 +++++
3 files changed, 35 insertions(+), 9 deletions(-)
diff --git a/drivers/md/raid5-cache.c b/drivers/md/raid5-cache.c
index 830bb7f..03cef8b 100644
--- a/drivers/md/raid5-cache.c
+++ b/drivers/md/raid5-cache.c
@@ -2373,6 +2373,8 @@ void r5c_release_extra_page(struct stripe_head *sh)
struct page *p = sh->dev[i].orig_page;
sh->dev[i].orig_page = sh->dev[i].page;
+ clear_bit(R5_OrigPageUPTDODATE, &sh->dev[i].flags);
+
if (!using_disk_info_extra_page)
put_page(p);
}
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 524b041..eb7425a 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -1019,7 +1019,13 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s)
if (test_bit(R5_SkipCopy, &sh->dev[i].flags))
WARN_ON(test_bit(R5_UPTODATE, &sh->dev[i].flags));
- sh->dev[i].vec.bv_page = sh->dev[i].page;
+
+ if (!op_is_write(op) &&
+ test_bit(R5_InJournal, &sh->dev[i].flags) &&
+ sh->dev[i].page != sh->dev[i].orig_page)
+ sh->dev[i].vec.bv_page = sh->dev[i].orig_page;
+ else
+ sh->dev[i].vec.bv_page = sh->dev[i].page;
bi->bi_vcnt = 1;
bi->bi_io_vec[0].bv_len = STRIPE_SIZE;
bi->bi_io_vec[0].bv_offset = 0;
@@ -2389,6 +2395,10 @@ static void raid5_end_read_request(struct bio * bi)
} else if (test_bit(R5_ReadNoMerge, &sh->dev[i].flags))
clear_bit(R5_ReadNoMerge, &sh->dev[i].flags);
+ if (test_bit(R5_InJournal, &sh->dev[i].flags) &&
+ sh->dev[i].page != sh->dev[i].orig_page)
+ set_bit(R5_OrigPageUPTDODATE, &sh->dev[i].flags);
+
if (atomic_read(&rdev->read_errors))
atomic_set(&rdev->read_errors, 0);
} else {
@@ -3603,6 +3613,21 @@ static void handle_stripe_clean_event(struct r5conf *conf,
break_stripe_batch_list(head_sh, STRIPE_EXPAND_SYNC_FLAGS);
}
+/*
+ * For RMW in write back cache, we need extra page in prexor to store the
+ * old data. This page is stored in dev->orig_page.
+ *
+ * This function checks whether we have data for prexor. The exact logic
+ * is:
+ * R5_UPTODATE && (!R5_InJournal || R5_OrigPageUPTDODATE)
+ */
+static inline bool uptodate_for_rmw(struct r5dev *dev)
+{
+ return (test_bit(R5_UPTODATE, &dev->flags)) &&
+ (!test_bit(R5_InJournal, &dev->flags) ||
+ test_bit(R5_OrigPageUPTDODATE, &dev->flags));
+}
+
static int handle_stripe_dirtying(struct r5conf *conf,
struct stripe_head *sh,
struct stripe_head_state *s,
@@ -3634,9 +3659,7 @@ static int handle_stripe_dirtying(struct r5conf *conf,
if ((dev->towrite || i == sh->pd_idx || i == sh->qd_idx ||
test_bit(R5_InJournal, &dev->flags)) &&
!test_bit(R5_LOCKED, &dev->flags) &&
- !((test_bit(R5_UPTODATE, &dev->flags) &&
- (!test_bit(R5_InJournal, &dev->flags) ||
- dev->page != dev->orig_page)) ||
+ !(uptodate_for_rmw(dev) ||
test_bit(R5_Wantcompute, &dev->flags))) {
if (test_bit(R5_Insync, &dev->flags))
rmw++;
@@ -3648,7 +3671,6 @@ static int handle_stripe_dirtying(struct r5conf *conf,
i != sh->pd_idx && i != sh->qd_idx &&
!test_bit(R5_LOCKED, &dev->flags) &&
!(test_bit(R5_UPTODATE, &dev->flags) ||
- test_bit(R5_InJournal, &dev->flags) ||
test_bit(R5_Wantcompute, &dev->flags))) {
if (test_bit(R5_Insync, &dev->flags))
rcw++;
@@ -3702,9 +3724,7 @@ static int handle_stripe_dirtying(struct r5conf *conf,
i == sh->pd_idx || i == sh->qd_idx ||
test_bit(R5_InJournal, &dev->flags)) &&
!test_bit(R5_LOCKED, &dev->flags) &&
- !((test_bit(R5_UPTODATE, &dev->flags) &&
- (!test_bit(R5_InJournal, &dev->flags) ||
- dev->page != dev->orig_page)) ||
+ !(uptodate_for_rmw(dev) ||
test_bit(R5_Wantcompute, &dev->flags)) &&
test_bit(R5_Insync, &dev->flags)) {
if (test_bit(STRIPE_PREREAD_ACTIVE,
@@ -3731,7 +3751,6 @@ static int handle_stripe_dirtying(struct r5conf *conf,
i != sh->pd_idx && i != sh->qd_idx &&
!test_bit(R5_LOCKED, &dev->flags) &&
!(test_bit(R5_UPTODATE, &dev->flags) ||
- test_bit(R5_InJournal, &dev->flags) ||
test_bit(R5_Wantcompute, &dev->flags))) {
rcw++;
if (test_bit(R5_Insync, &dev->flags) &&
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h
index b39fe46..6cc8d4c 100644
--- a/drivers/md/raid5.h
+++ b/drivers/md/raid5.h
@@ -322,6 +322,11 @@ enum r5dev_flags {
* data and parity being written are in the journal
* device
*/
+ R5_OrigPageUPTDODATE, /* with write back cache, we read old data into
+ * dev->orig_page for prexor. When this flag is
+ * set, orig_page contains latest data in the
+ * raid disk.
+ */
};
/*
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
