Hi Neil, 2016-11-24 5:47 GMT+01:00 NeilBrown <neilb@xxxxxxxx>: > On Sat, Nov 19 2016, Jack Wang wrote: > >> 2016-11-18 6:16 GMT+01:00 NeilBrown <neilb@xxxxxxxx>: >>> Hi, >>> >>> I've been sitting on these patches for a while because although they >>> solve a real problem, it is a fairly limited use-case, and I don't >>> really like some of the details. >>> >>> So I'm posting them as RFC in the hope that a different perspective >>> might help me like them better, or find a better approach. >>> >>> The core idea is that when you have multiple copies of data >>> (i.e. mirrored drives) it doesn't make sense to wait for a read from >>> a drive that seems to be having problems. It will probably be faster >>> to just cancel that read, and read from the other device. >>> Similarly, in some circumstances, it might be better to fail a drive >>> that is being slow to respond to writes, rather than cause all writes >>> to be very slow. >>> >>> The particular context where this comes up is when mirroring across >>> storage arrays, where the storage arrays can temporarily take an >>> unusually long time to respond to requests (firmware updates have >>> been mentioned). As the array will have redundancy internally, there >>> is little risk to the data. The mirrored pair is really only for >>> disaster recovery, and it is deemed better to lose the last few >>> minutes of updates in the case of a serious disaster, rather than >>> occasionally having latency issues because one array needs to do some >>> maintenance for a few minutes. The particular storage arrays in >>> question are DASD devices which are part of the s390 ecosystem. >> >> Hi Neil, >> >> Thanks for pushing this feature also to mainline. >> We at Profitbricks use raid1 across IB network, one pserver with >> raid1, both legs on 2 remote storages. >> We've noticed if one remote storage crash , and raid1 still keep >> sending IO to the faulty leg, even after 5 minutes, >> md still redirect I/Os, and md refuse to remove active disks, eg: > > That make sense. It cannot remove the active disk until all pending IO > completes, either with an error or with success. > > If the target has a long timeout, that can delay progress a lot. > >> >> I tried to port you patch from SLES[1], with the patchset, it reduce >> the time to ~30 seconds. >> >> I'm happy to see this feature upstream :) >> I will test again this new patchset. > > Thanks for your confirmation that this is more generally useful than I > thought, and I'm always happy to hear for more testing :-) > > Thanks, > NeilBrown Just want to update test result, so far it's working fine, no regression :) Will report if anything breaks. Thanks Jack -- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
