Ok Phil,
sorry for that.
In the meantime I tried to use mdadm with the --build option.
mdadm --build --level=10 --raid-devices=2 --chunk=64 /dev/md0 /dev/sde1
/dev/sde2
after about 1% I stopped it and did the same with just /dev/sde and
/dev/sdf because I remembered I had used the whole drives previously but
that wasn't that case here -> stopped quickly.
Both times I used e2fsck /dev/md0 -n without success.
I also tried mke2fs -n to find out the superblock copies, without success.
The I created a raid10 because the manpage says: "but the content of the
device is left otherwise untouched" and waited for about 40% resync,
checking md0 with hexdump, then rebooted to install a new system,
because pxe booting is a long process and the risk of the old system
again auto-assembling the array as RAID1 was there.
So now when I boot a new installation the RAID10 is assembled but not
resyncing (auto read-only).
Regarding syslogs of the last working assembly, those don't exist
anymore. The old OS was replaced by a new installation.
Last good assembly was approx. Nov 04 2016 ~ 1400 CET.
# mdadm -E /dev/sde1
/dev/sde1:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x1
Array UUID : 7306a1c3:bec6f242:2d17bc6d:17afa5c7
Name : arch:0
Creation Time : Sat Nov 5 17:58:30 2016
Raid Level : raid10
Raid Devices : 2
Avail Dev Size : 3906764943 (1862.89 GiB 2000.26 GB)
Array Size : 1953382400 (1862.89 GiB 2000.26 GB)
Used Dev Size : 3906764800 (1862.89 GiB 2000.26 GB)
Data Offset : 262144 sectors
Super Offset : 8 sectors
Unused Space : before=262056 sectors, after=143 sectors
State : active
Device UUID : 91f5e09a:fb8c5d17:e3f052e4:fec979fc
Internal Bitmap : 8 sectors from superblock
Update Time : Sat Nov 5 19:21:43 2016
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : c546f079 - correct
Events : 979
Layout : near=2
Chunk Size : 512K
Device Role : Active device 0
Array State : AA ('A' == active, '.' == missing, 'R' == replacing)
-
# mdadm -E /dev/sdf1
/dev/sdf1:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x1
Array UUID : 7306a1c3:bec6f242:2d17bc6d:17afa5c7
Name : arch:0
Creation Time : Sat Nov 5 17:58:30 2016
Raid Level : raid10
Raid Devices : 2
Avail Dev Size : 3906764943 (1862.89 GiB 2000.26 GB)
Array Size : 1953382400 (1862.89 GiB 2000.26 GB)
Used Dev Size : 3906764800 (1862.89 GiB 2000.26 GB)
Data Offset : 262144 sectors
Super Offset : 8 sectors
Unused Space : before=262056 sectors, after=143 sectors
State : active
Device UUID : f0e3d531:98ce389c:1bed4139:5417791d
Internal Bitmap : 8 sectors from superblock
Update Time : Sat Nov 5 19:21:43 2016
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : 57056a03 - correct
Events : 979
Layout : near=2
Chunk Size : 512K
Device Role : Active device 1
Array State : AA ('A' == active, '.' == missing, 'R' == replacing)
-
# ./lsdrv
PCI [ahci] 00:17.0 SATA controller: Intel Corporation Sunrise Point-H
SATA controller [AHCI mode] (rev 31)
├scsi 0:0:0:0 ATA Samsung SSD 840 {S12RNEAD329899T}
│└sda 238.47g [8:0] Partitioned (gpt)
│ ├sda1 300.00m [8:1] ntfs 'Wiederherstellung' {C268192968191E2B}
│ ├sda2 100.00m [8:2] vfat {3220-6E38}
│ ├sda3 128.00m [8:3] Empty/Unknown
│ ├sda4 237.52g [8:4] ntfs {5CC02A08C029E8CA}
│ └sda5 450.00m [8:5] ntfs {48963645963633B2}
├scsi 1:0:0:0 ATA Samsung SSD 840 {S12PNEAD320071X}
│└sdb 119.24g [8:16] Partitioned (gpt)
│ ├sdb1 256.00m [8:17] vfat {6B67-1A2D}
│ └sdb2 118.99g [8:18] ext4 {eb75a1fd-f602-4312-b9ea-44c53b27faf7}
│ └Mounted as /dev/sdb2 @ /
├scsi 2:0:0:0 ATA Samsung SSD 840 {S1D9NSAF642954E}
│└sdc 931.51g [8:32] Partitioned (gpt)
│ ├sdc1 128.00m [8:33] Empty/Unknown
│ └sdc2 931.39g [8:34] ntfs '1TB' {80F86A9DF86A90E8}
├scsi 3:0:0:0 ATA ST4000DM000-1F21 {Z300CW2F}
│└sdd 3.64t [8:48] Partitioned (gpt)
│ ├sdd1 128.00m [8:49] Empty/Unknown
│ └sdd2 3.64t [8:50] ntfs {F2166E73166E38AD}
├scsi 4:0:0:0 ATA TOSHIBA DT01ACA2 {13QH679AS}
│└sde 1.82t [8:64] Partitioned (gpt)
│ └sde1 1.82t [8:65] MD raid10,near2 (0/2) (w/ sdf1) in_sync 'arch:0'
{7306a1c3-bec6-f242-2d17-bc6d17afa5c7}
│ └md127 1.82t [9:127] MD v1.2 raid10,near2 (2) read-auto, 512k Chunk
{7306a1c3:bec6f242:2d17bc6d:17afa5c7}
│ Empty/Unknown
└scsi 5:0:0:0 ATA TOSHIBA DT01ACA2 {13QH4MDAS}
└sdf 1.82t [8:80] Partitioned (gpt)
└sdf1 1.82t [8:81] MD raid10,near2 (1/2) (w/ sde1) in_sync 'arch:0'
{7306a1c3-bec6-f242-2d17-bc6d17afa5c7}
└md127 1.82t [9:127] MD v1.2 raid10,near2 (2) read-auto, 512k Chunk
{7306a1c3:bec6f242:2d17bc6d:17afa5c7}
Empty/Unknown
PCI [ahci] 03:00.0 SATA controller: ASMedia Technology Inc. ASM1062
Serial ATA Controller (rev 02)
├scsi 6:x:x:x [Empty]
└scsi 7:x:x:x [Empty]
-
# dmesg
[ 0.000000] microcode: microcode updated early to revision 0x9e, date
= 2016-06-22
[ 0.000000] Linux version 4.8.6-1-ARCH (builduser@tobias) (gcc
version 6.2.1 20160830 (GCC) ) #1 SMP PREEMPT Mon Oct 31 18:51:30 CET 2016
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux
root=UUID=eb75a1fd-f602-4312-b9ea-44c53b27faf7 rw quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating
point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds
registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is
960 bytes, using 'compacted' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006df83fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000006df84000-0x000000006df84fff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000006df85000-0x000000006dfcefff]
reserved
[ 0.000000] BIOS-e820: [mem 0x000000006dfcf000-0x000000006e026fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000006e027000-0x000000006ed17fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x000000006ed18000-0x000000006ed2dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000006ed2e000-0x000000006ed93fff]
type 20
[ 0.000000] BIOS-e820: [mem 0x000000006ed94000-0x000000006f9cbfff]
reserved
[ 0.000000] BIOS-e820: [mem 0x000000006f9cc000-0x000000006ff99fff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000006ff9a000-0x000000006ffccfff]
ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000006ffcd000-0x000000006fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000700fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000fffffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ESRT=0x6f5c6018 ACPI=0x6ff1e000 ACPI
2.0=0x6ff1e000 SMBIOS=0xf05e0 MPS=0xfc960
[ 0.000000] esrt: Reserving ESRT space from 0x000000006f5c6018 to
0x000000006f5c6050.
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by
O.E.M./X170-Extreme ECC, BIOS F1 02/18/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1000000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.000000] 1 base 0078000000 mask 7FF8000000 uncachable
[ 0.000000] 2 base 0074000000 mask 7FFC000000 uncachable
[ 0.000000] 3 base 0072000000 mask 7FFE000000 uncachable
[ 0.000000] 4 base 0071000000 mask 7FFF000000 uncachable
[ 0.000000] 5 base 0070800000 mask 7FFF800000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x70000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcbe0-0x000fcbef] mapped
at [ffff8800000fcbe0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x01b4d000, 0x01b4dfff] PGTABLE
[ 0.000000] BRK [0x01b4e000, 0x01b4efff] PGTABLE
[ 0.000000] BRK [0x01b4f000, 0x01b4ffff] PGTABLE
[ 0.000000] BRK [0x01b50000, 0x01b50fff] PGTABLE
[ 0.000000] BRK [0x01b51000, 0x01b51fff] PGTABLE
[ 0.000000] BRK [0x01b52000, 0x01b52fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3733f000-0x37996fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000006FF1E000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000006FF1E0A0 0000C4 (v01 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000006FF40CD0 00010C (v05 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000006FF1E200 022ACC (v02 ALASKA A M I
01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x000000006FF99F80 000040
[ 0.000000] ACPI: APIC 0x000000006FF40DE0 0000BC (v03 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000006FF40EA0 000044 (v01 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x000000006FF40EE8 00009C (v01 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000006FF40F88 00003C (v01 ALASKA A M I
01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000006FF40FC8 000038 (v01 ALASKA A M I
01072009 AMI. 0005000B)
[ 0.000000] ACPI: SSDT 0x000000006FF41000 00036D (v01 SataRe SataTabl
00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000006FF41370 000490 (v02 Intel PerfTune
00001000 INTL 20120913)
[ 0.000000] ACPI: LPIT 0x000000006FF41800 000094 (v01 INTEL SKL
00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000006FF41898 000248 (v02 INTEL sensrhub
00000000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000006FF41AE0 002BAE (v02 INTEL PtidDevc
00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000006FF44690 000C45 (v02 INTEL Ther_Rvp
00001000 INTL 20120913)
[ 0.000000] ACPI: DBGP 0x000000006FF452D8 000034 (v01 INTEL
00000000 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x000000006FF45310 000054 (v00 INTEL
00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000006FF45368 002103 (v02 INTEL xh_rvp10
00000000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000006FF47470 005384 (v02 SaSsdt SaSsdt
00003000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x000000006FF4C7F8 000042 (v01 ALASKA A M I
00000000 00000000)
[ 0.000000] ACPI: SSDT 0x000000006FF4C840 000E58 (v02 CpuRef CpuSsdt
00003000 INTL 20120913)
[ 0.000000] ACPI: DMAR 0x000000006FF4D698 000070 (v01 INTEL SKL
00000001 INTL 00000001)
[ 0.000000] ACPI: ASF! 0x000000006FF4D708 0000A5 (v32 INTEL HCG
00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000fffffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0xfffff9000-0xfffffdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000fffffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000006df83fff]
[ 0.000000] node 0: [mem 0x000000006dfcf000-0x000000006e026fff]
[ 0.000000] node 0: [mem 0x000000006ed18000-0x000000006ed2dfff]
[ 0.000000] node 0: [mem 0x000000006ffcd000-0x000000006fffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000fffffffff]
[ 0.000000] Initmem setup node 0 [mem
0x0000000000001000-0x0000000fffffffff]
[ 0.000000] On node 0 totalpages: 16179138
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 28 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6977 pages used for memmap
[ 0.000000] DMA32 zone: 446501 pages, LIFO batch:31
[ 0.000000] Normal zone: 245760 pages used for memmap
[ 0.000000] Normal zone: 15728640 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6df84000-0x6df84fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6df85000-0x6dfcefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6e027000-0x6ed17fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6ed2e000-0x6ed93fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6ed94000-0x6f9cbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6f9cc000-0x6ff99fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6ff9a000-0x6ffccfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x70000000-0x700fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x70100000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x70100000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff
max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128
nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff880fffc00000 s103128
r8192 d32040 u262144
[ 0.000000] pcpu-alloc: s103128 r8192 d32040 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 15926309
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux
root=UUID=eb75a1fd-f602-4312-b9ea-44c53b27faf7 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 63544900K/64716552K available (6130K kernel code,
1051K rwdata, 1912K rodata, 1256K init, 1036K bss, 1171652K reserved, 0K
cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:2048 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 3600.000 MHz processor
[ 0.000027] Calibrating delay loop (skipped), value calculated using
timer frequency.. 7202.00 BogoMIPS (lpj=12000000)
[ 0.000029] pid_max: default: 32768 minimum: 301
[ 0.000046] ACPI: Core revision 20160422
[ 0.024530] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.025246] Security Framework initialized
[ 0.025246] Yama: becoming mindful.
[ 0.027070] Dentry cache hash table entries: 8388608 (order: 14,
67108864 bytes)
[ 0.034236] Inode-cache hash table entries: 4194304 (order: 13,
33554432 bytes)
[ 0.037336] Mount-cache hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.037363] Mountpoint-cache hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.037633] CPU: Physical Processor ID: 0
[ 0.037633] CPU: Processor Core ID: 0
[ 0.037637] mce: CPU supports 10 MCE banks
[ 0.037643] CPU0: Thermal monitoring enabled (TM1)
[ 0.037655] process: using mwait in idle threads
[ 0.037657] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.037657] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.037879] Freeing SMP alternatives memory: 24K (ffffffff81a42000 -
ffffffff81a48000)
[ 0.039879] ftrace: allocating 24337 entries in 96 pages
[ 0.046511] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.046511] smpboot: Max logical packages: 2
[ 0.046514] DMAR: Host address width 39
[ 0.046514] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.046519] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap
d2008c40660462 ecap f050da
[ 0.046520] DMAR: RMRR base: 0x0000006f8f6000 end: 0x0000006f915fff
[ 0.046521] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
[ 0.046521] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[ 0.046522] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt
out bit.
[ 0.046522] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the
BIOS setting.
[ 0.047881] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.047881] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.052016] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.085024] TSC deadline timer enabled
[ 0.085029] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1275 v5 @ 3.60GHz
(family: 0x6, model: 0x5e, stepping: 0x3)
[ 0.085031] Performance Events: PEBS fmt3+, Skylake events, 32-deep
LBR, full-width counters, Intel PMU driver.
[ 0.085048] ... version: 4
[ 0.085048] ... bit width: 48
[ 0.085048] ... generic registers: 4
[ 0.085049] ... value mask: 0000ffffffffffff
[ 0.085049] ... max period: 0000ffffffffffff
[ 0.085049] ... fixed-purpose events: 3
[ 0.085049] ... event mask: 000000070000000f
[ 0.108541] NMI watchdog: enabled on all CPUs, permanently consumes
one hw-PMU counter.
[ 0.125102] x86: Booting SMP configuration:
[ 0.125104] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.790689] x86: Booted up 1 node, 8 CPUs
[ 0.790691] smpboot: Total of 8 processors activated (57631.04 BogoMIPS)
[ 0.797364] devtmpfs: initialized
[ 0.797398] x86/mm: Memory block size: 2048MB
[ 0.798519] PM: Registering ACPI NVS region [mem
0x6df84000-0x6df84fff] (4096 bytes)
[ 0.798520] PM: Registering ACPI NVS region [mem
0x6f9cc000-0x6ff99fff] (6086656 bytes)
[ 0.798596] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.798624] pinctrl core: initialized pinctrl subsystem
[ 0.798725] RTC time: 20:26:17, date: 11/05/16
[ 0.799418] NET: Registered protocol family 16
[ 0.813169] cpuidle: using governor ladder
[ 0.833186] cpuidle: using governor menu
[ 0.833254] ACPI FADT declares the system doesn't support PCIe ASPM,
so disable it
[ 0.833270] ACPI: bus type PCI registered
[ 0.833270] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.833309] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.833310] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.833318] PCI: Using configuration type 1 for base access
[ 0.853323] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.853323] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.853440] ACPI: Added _OSI(Module Device)
[ 0.853441] ACPI: Added _OSI(Processor Device)
[ 0.853441] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.853441] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.854314] ACPI: Executed 23 blocks of module-level executable AML code
[ 0.860386] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.918944] ACPI: Dynamic OEM Table Load:
[ 0.918947] ACPI: SSDT 0xFFFF880FBAAF5800 000726 (v02 PmRef Cpu0Ist
00003000 INTL 20120913)
[ 0.919530] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.920533] ACPI: Dynamic OEM Table Load:
[ 0.920536] ACPI: SSDT 0xFFFF880FBAB07000 00037F (v02 PmRef Cpu0Cst
00003001 INTL 20120913)
[ 0.921527] ACPI: Dynamic OEM Table Load:
[ 0.921530] ACPI: SSDT 0xFFFF880FBAAF1800 0005AA (v02 PmRef ApIst
00003000 INTL 20120913)
[ 0.922246] ACPI: Dynamic OEM Table Load:
[ 0.922248] ACPI: SSDT 0xFFFF880FBAAFC600 000119 (v02 PmRef ApCst
00003000 INTL 20120913)
[ 0.926306] ACPI: Interpreter enabled
[ 0.926331] ACPI: (supports S0 S3 S4 S5)
[ 0.926332] ACPI: Using IOAPIC for interrupt routing
[ 0.926354] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.927747] ACPI: Power Resource [PG00] (on)
[ 0.927992] ACPI: Power Resource [PG01] (on)
[ 0.928218] ACPI: Power Resource [PG02] (on)
[ 0.929681] ACPI: Power Resource [WRST] (off)
[ 0.929888] ACPI: Power Resource [WRST] (off)
[ 0.930097] ACPI: Power Resource [WRST] (off)
[ 0.930303] ACPI: Power Resource [WRST] (off)
[ 0.930510] ACPI: Power Resource [WRST] (off)
[ 0.930713] ACPI: Power Resource [WRST] (off)
[ 0.930917] ACPI: Power Resource [WRST] (off)
[ 0.931120] ACPI: Power Resource [WRST] (off)
[ 0.931337] ACPI: Power Resource [WRST] (off)
[ 0.931542] ACPI: Power Resource [WRST] (off)
[ 0.931744] ACPI: Power Resource [WRST] (off)
[ 0.931948] ACPI: Power Resource [WRST] (off)
[ 0.932152] ACPI: Power Resource [WRST] (off)
[ 0.932358] ACPI: Power Resource [WRST] (off)
[ 0.932560] ACPI: Power Resource [WRST] (off)
[ 0.932763] ACPI: Power Resource [WRST] (off)
[ 0.933026] ACPI: Power Resource [WRST] (off)
[ 0.933230] ACPI: Power Resource [WRST] (off)
[ 0.933434] ACPI: Power Resource [WRST] (off)
[ 0.933640] ACPI: Power Resource [WRST] (off)
[ 0.938424] ACPI: Power Resource [FN00] (off)
[ 0.938468] ACPI: Power Resource [FN01] (off)
[ 0.938509] ACPI: Power Resource [FN02] (off)
[ 0.938550] ACPI: Power Resource [FN03] (off)
[ 0.938592] ACPI: Power Resource [FN04] (off)
[ 0.939326] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.939329] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
ClockPM Segments MSI]
[ 0.939349] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.939760] PCI host bridge to bus 0000:00
[ 0.939761] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.939762] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.939762] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff window]
[ 0.939763] pci_bus 0000:00: root bus resource [mem
0x71800000-0xdfffffff window]
[ 0.939763] pci_bus 0000:00: root bus resource [mem
0xfd000000-0xfe7fffff window]
[ 0.939764] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.939769] pci 0000:00:00.0: [8086:1918] type 00 class 0x060000
[ 0.939971] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.939998] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.940072] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.940176] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.940192] pci 0000:00:14.0: reg 0x10: [mem 0xda130000-0xda13ffff 64bit]
[ 0.940246] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.940310] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.940335] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[ 0.940349] pci 0000:00:14.2: reg 0x10: [mem 0xda14e000-0xda14efff 64bit]
[ 0.940470] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.940486] pci 0000:00:16.0: reg 0x10: [mem 0xda14d000-0xda14dfff 64bit]
[ 0.940547] pci 0000:00:16.0: PME# supported from D3hot
[ 0.940644] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[ 0.940655] pci 0000:00:17.0: reg 0x10: [mem 0xda148000-0xda149fff]
[ 0.940660] pci 0000:00:17.0: reg 0x14: [mem 0xda14c000-0xda14c0ff]
[ 0.940666] pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
[ 0.940671] pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
[ 0.940677] pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
[ 0.940682] pci 0000:00:17.0: reg 0x24: [mem 0xda14b000-0xda14b7ff]
[ 0.940713] pci 0000:00:17.0: PME# supported from D3hot
[ 0.940798] pci 0000:00:1b.0: [8086:a167] type 01 class 0x060400
[ 0.940838] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.940907] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.940934] pci 0000:00:1b.3: [8086:a16a] type 01 class 0x060400
[ 0.940977] pci 0000:00:1b.3: PME# supported from D0 D3hot D3cold
[ 0.941048] pci 0000:00:1b.3: System wakeup disabled by ACPI
[ 0.941083] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
[ 0.941132] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.941204] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.941228] pci 0000:00:1c.2: [8086:a112] type 01 class 0x060400
[ 0.941273] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.941346] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.941369] pci 0000:00:1c.4: [8086:a114] type 01 class 0x060400
[ 0.941412] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.941482] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.941513] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[ 0.941563] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.941634] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.941667] pci 0000:00:1d.4: [8086:a11c] type 01 class 0x060400
[ 0.941716] pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
[ 0.941784] pci 0000:00:1d.4: System wakeup disabled by ACPI
[ 0.941818] pci 0000:00:1f.0: [8086:a149] type 00 class 0x060100
[ 0.941982] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.941991] pci 0000:00:1f.2: reg 0x10: [mem 0xda144000-0xda147fff]
[ 0.942111] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[ 0.942130] pci 0000:00:1f.3: reg 0x10: [mem 0xda140000-0xda143fff 64bit]
[ 0.942157] pci 0000:00:1f.3: reg 0x20: [mem 0xda120000-0xda12ffff 64bit]
[ 0.942199] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.942299] pci 0000:00:1f.3: System wakeup disabled by ACPI
[ 0.942327] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.942373] pci 0000:00:1f.4: reg 0x10: [mem 0xda14a000-0xda14a0ff 64bit]
[ 0.942442] pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
[ 0.942594] pci 0000:00:1f.6: [8086:15b7] type 00 class 0x020000
[ 0.942613] pci 0000:00:1f.6: reg 0x10: [mem 0xda100000-0xda11ffff]
[ 0.942708] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.942773] pci 0000:00:1f.6: System wakeup disabled by ACPI
[ 0.942820] pci 0000:01:00.0: [10de:1184] type 00 class 0x030000
[ 0.942828] pci 0000:01:00.0: reg 0x10: [mem 0xdb000000-0xdbffffff]
[ 0.942837] pci 0000:01:00.0: reg 0x14: [mem 0xb8000000-0xbfffffff
64bit pref]
[ 0.942845] pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff
64bit pref]
[ 0.942850] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.942855] pci 0000:01:00.0: reg 0x30: [mem 0xdc000000-0xdc07ffff pref]
[ 0.942907] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.942931] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
[ 0.942939] pci 0000:01:00.1: reg 0x10: [mem 0xdc080000-0xdc083fff]
[ 0.950242] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.950244] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.950245] pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff]
[ 0.950247] pci 0000:00:01.0: bridge window [mem
0xb8000000-0xc1ffffff 64bit pref]
[ 0.950312] acpiphp: Slot [1] registered
[ 0.950315] pci 0000:00:1b.0: PCI bridge to [bus 02]
[ 0.950388] pci 0000:03:00.0: [1b21:0612] type 00 class 0x010601
[ 0.950402] pci 0000:03:00.0: reg 0x10: [io 0xd050-0xd057]
[ 0.950410] pci 0000:03:00.0: reg 0x14: [io 0xd040-0xd043]
[ 0.950419] pci 0000:03:00.0: reg 0x18: [io 0xd030-0xd037]
[ 0.950427] pci 0000:03:00.0: reg 0x1c: [io 0xd020-0xd023]
[ 0.950435] pci 0000:03:00.0: reg 0x20: [io 0xd000-0xd01f]
[ 0.950443] pci 0000:03:00.0: reg 0x24: [mem 0xdc310000-0xdc3101ff]
[ 0.950451] pci 0000:03:00.0: reg 0x30: [mem 0xdc300000-0xdc30ffff pref]
[ 0.950537] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.960232] pci 0000:00:1b.3: PCI bridge to [bus 03]
[ 0.960238] pci 0000:00:1b.3: bridge window [io 0xd000-0xdfff]
[ 0.960257] pci 0000:00:1b.3: bridge window [mem 0xdc300000-0xdc3fffff]
[ 0.960320] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.960387] pci 0000:00:1c.2: PCI bridge to [bus 05]
[ 0.960388] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
[ 0.960390] pci 0000:00:1c.2: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.960465] pci 0000:06:00.0: [8086:1578] type 01 class 0x060400
[ 0.960548] pci 0000:06:00.0: supports D1 D2
[ 0.960549] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.960609] pci 0000:06:00.0: System wakeup disabled by ACPI
[ 0.970242] pci 0000:00:1c.4: PCI bridge to [bus 06-70]
[ 0.970250] pci 0000:00:1c.4: bridge window [mem 0xc4000000-0xda0fffff]
[ 0.970268] pci 0000:00:1c.4: bridge window [mem
0x90000000-0xb1ffffff 64bit pref]
[ 0.970270] pci 0000:06:00.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 0.970307] pci_bus 0000:07: busn_res: can not insert [bus 07-ff]
under [bus 06-70] (conflicts with (null) [bus 06-70])
[ 0.970320] pci 0000:07:00.0: [8086:1578] type 01 class 0x060400
[ 0.970407] pci 0000:07:00.0: supports D1 D2
[ 0.970407] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.970460] pci 0000:07:01.0: [8086:1578] type 01 class 0x060400
[ 0.970547] pci 0000:07:01.0: supports D1 D2
[ 0.970547] pci 0000:07:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.970598] pci 0000:07:02.0: [8086:1578] type 01 class 0x060400
[ 0.970684] pci 0000:07:02.0: supports D1 D2
[ 0.970684] pci 0000:07:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.970736] pci 0000:07:04.0: [8086:1578] type 01 class 0x060400
[ 0.970822] pci 0000:07:04.0: supports D1 D2
[ 0.970823] pci 0000:07:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.970890] pci 0000:06:00.0: PCI bridge to [bus 07-ff]
[ 0.970895] pci 0000:06:00.0: bridge window [io 0x0000-0x0fff]
[ 0.970897] pci 0000:06:00.0: bridge window [mem 0x00000000-0x000fffff]
[ 0.970902] pci 0000:06:00.0: bridge window [mem
0x00000000-0x000fffff 64bit pref]
[ 0.970904] pci 0000:07:00.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 0.970909] pci 0000:07:01.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 0.970915] pci 0000:07:02.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 0.970920] pci 0000:07:04.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 0.970959] pci 0000:07:00.0: PCI bridge to [bus 08-ff]
[ 0.970963] pci 0000:07:00.0: bridge window [io 0x0000-0x0fff]
[ 0.970966] pci 0000:07:00.0: bridge window [mem 0x00000000-0x000fffff]
[ 0.970971] pci 0000:07:00.0: bridge window [mem
0x00000000-0x000fffff 64bit pref]
[ 0.970972] pci_bus 0000:08: busn_res: [bus 08-ff] end is updated to 08
[ 0.971008] pci 0000:07:01.0: PCI bridge to [bus 09-ff]
[ 0.971012] pci 0000:07:01.0: bridge window [io 0x0000-0x0fff]
[ 0.971015] pci 0000:07:01.0: bridge window [mem 0x00000000-0x000fffff]
[ 0.971019] pci 0000:07:01.0: bridge window [mem
0x00000000-0x000fffff 64bit pref]
[ 0.971020] pci_bus 0000:09: busn_res: [bus 09-ff] end is updated to 09
[ 0.971069] pci 0000:0a:00.0: [8086:15b6] type 00 class 0x0c0330
[ 0.971084] pci 0000:0a:00.0: reg 0x10: [mem 0x00000000-0x0000ffff]
[ 0.971208] pci 0000:0a:00.0: supports D1 D2
[ 0.971208] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.971280] pci 0000:07:02.0: PCI bridge to [bus 0a-ff]
[ 0.971285] pci 0000:07:02.0: bridge window [io 0x0000-0x0fff]
[ 0.971287] pci 0000:07:02.0: bridge window [mem 0x00000000-0x000fffff]
[ 0.971292] pci 0000:07:02.0: bridge window [mem
0x00000000-0x000fffff 64bit pref]
[ 0.971292] pci_bus 0000:0a: busn_res: [bus 0a-ff] end is updated to 0a
[ 0.971328] pci 0000:07:04.0: PCI bridge to [bus 0b-ff]
[ 0.971333] pci 0000:07:04.0: bridge window [io 0x0000-0x0fff]
[ 0.971335] pci 0000:07:04.0: bridge window [mem 0x00000000-0x000fffff]
[ 0.971340] pci 0000:07:04.0: bridge window [mem
0x00000000-0x000fffff 64bit pref]
[ 0.971340] pci_bus 0000:0b: busn_res: [bus 0b-ff] end is updated to 0b
[ 0.971343] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 0b
[ 0.971406] pci 0000:00:1d.0: PCI bridge to [bus 71]
[ 0.971476] acpiphp: Slot [1-1] registered
[ 0.971484] pci 0000:00:1d.4: PCI bridge to [bus 72]
[ 0.972798] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12
14 15)
[ 0.972830] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12
14 15)
[ 0.972862] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12
*14 15)
[ 0.972893] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14
*15)
[ 0.972924] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12
14 15)
[ 0.972955] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12
14 15)
[ 0.972987] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12
14 15)
[ 0.973018] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12
14 15)
[ 0.973275] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.973330] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.973330] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.973331] vgaarb: loaded
[ 0.973332] vgaarb: bridge control possible 0000:01:00.0
[ 0.977322] PCI: Using ACPI for IRQ routing
[ 0.996003] PCI: pci_cache_line_size set to 64 bytes
[ 0.996063] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.996064] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.996064] e820: reserve RAM buffer [mem 0x6df84000-0x6fffffff]
[ 0.996065] e820: reserve RAM buffer [mem 0x6e027000-0x6fffffff]
[ 0.996066] e820: reserve RAM buffer [mem 0x6ed2e000-0x6fffffff]
[ 0.996116] NetLabel: Initializing
[ 0.996117] NetLabel: domain hash size = 128
[ 0.996117] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.996124] NetLabel: unlabeled traffic allowed by default
[ 0.996191] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.996194] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.998234] clocksource: Switched to clocksource hpet
[ 1.001805] VFS: Disk quotas dquot_6.6.0
[ 1.001857] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
bytes)
[ 1.001895] pnp: PnP ACPI init
[ 1.002053] system 00:00: [io 0x0a00-0x0a2f] has been reserved
[ 1.002054] system 00:00: [io 0x0a30-0x0a3f] has been reserved
[ 1.002055] system 00:00: [io 0x0a40-0x0a4f] has been reserved
[ 1.002057] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.002301] system 00:01: [io 0x0680-0x069f] has been reserved
[ 1.002302] system 00:01: [io 0xffff] has been reserved
[ 1.002303] system 00:01: [io 0xffff] has been reserved
[ 1.002303] system 00:01: [io 0xffff] has been reserved
[ 1.002304] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 1.002304] system 00:01: [io 0x164e-0x164f] has been reserved
[ 1.002306] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.002363] system 00:02: [io 0x0800-0x087f] has been reserved
[ 1.002364] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.002376] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.002398] system 00:04: [io 0x1854-0x1857] has been reserved
[ 1.002399] system 00:04: Plug and Play ACPI device, IDs INT3f0d
PNP0c02 (active)
[ 1.002530] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.002530] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.002531] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.002532] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.002532] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.002533] system 00:05: [mem 0xfed90000-0xfed93fff] could not be
reserved
[ 1.002534] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.002535] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 1.002535] system 00:05: [mem 0xfee00000-0xfeefffff] could not be
reserved
[ 1.002536] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 1.002537] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.002562] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 1.002562] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 1.002563] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 1.002564] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be
reserved
[ 1.002564] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 1.002565] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 1.002566] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 1.002567] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.003226] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 1.003227] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 1.003228] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 1.003229] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.003738] pnp: PnP ACPI: found 8 devices
[ 1.011606] clocksource: acpi_pm: mask: 0xffffff max_cycles:
0xffffff, max_idle_ns: 2085701024 ns
[ 1.011640] pci 0000:07:01.0: bridge window [io 0x1000-0x0fff] to
[bus 09] add_size 1000
[ 1.011641] pci 0000:07:01.0: bridge window [mem
0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000 add_align
100000
[ 1.011642] pci 0000:07:01.0: bridge window [mem
0x00100000-0x000fffff] to [bus 09] add_size 200000 add_align 100000
[ 1.011655] pci 0000:07:04.0: bridge window [io 0x1000-0x0fff] to
[bus 0b] add_size 1000
[ 1.011656] pci 0000:07:04.0: bridge window [mem
0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000 add_align
100000
[ 1.011656] pci 0000:07:04.0: bridge window [mem
0x00100000-0x000fffff] to [bus 0b] add_size 200000 add_align 100000
[ 1.011663] pci 0000:07:01.0: res[13]=[io 0x1000-0x0fff]
res_to_dev_res add_size 1000 min_align 1000
[ 1.011664] pci 0000:07:04.0: res[13]=[io 0x1000-0x0fff]
res_to_dev_res add_size 1000 min_align 1000
[ 1.011665] pci 0000:06:00.0: bridge window [io 0x1000-0x0fff] to
[bus 07-0b] add_size 2000
[ 1.011665] pci 0000:07:01.0: res[15]=[mem 0x00100000-0x000fffff
64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1.011666] pci 0000:07:01.0: res[15]=[mem 0x00100000-0x000fffff
64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1.011667] pci 0000:07:04.0: res[15]=[mem 0x00100000-0x000fffff
64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1.011668] pci 0000:07:04.0: res[15]=[mem 0x00100000-0x000fffff
64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1.011668] pci 0000:06:00.0: bridge window [mem
0x00100000-0x000fffff 64bit pref] to [bus 07-0b] add_size 400000
add_align 100000
[ 1.011669] pci 0000:07:01.0: res[14]=[mem 0x00100000-0x000fffff]
res_to_dev_res add_size 200000 min_align 100000
[ 1.011670] pci 0000:07:01.0: res[14]=[mem 0x00100000-0x000fffff]
res_to_dev_res add_size 200000 min_align 100000
[ 1.011671] pci 0000:07:04.0: res[14]=[mem 0x00100000-0x000fffff]
res_to_dev_res add_size 200000 min_align 100000
[ 1.011671] pci 0000:07:04.0: res[14]=[mem 0x00100000-0x000fffff]
res_to_dev_res add_size 200000 min_align 100000
[ 1.011672] pci 0000:06:00.0: bridge window [mem
0x00100000-0x001fffff] to [bus 07-0b] add_size 400000 add_align 100000
[ 1.011676] pci 0000:06:00.0: res[13]=[io 0x1000-0x0fff]
res_to_dev_res add_size 2000 min_align 1000
[ 1.011677] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to
[bus 06-70] add_size 2000
[ 1.011688] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff]
res_to_dev_res add_size 2000 min_align 1000
[ 1.011689] pci 0000:00:1c.4: res[13]=[io 0x1000-0x2fff]
res_to_dev_res add_size 2000 min_align 1000
[ 1.011690] pci 0000:00:1c.4: BAR 13: assigned [io 0x2000-0x3fff]
[ 1.011692] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.011693] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 1.011694] pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff]
[ 1.011696] pci 0000:00:01.0: bridge window [mem
0xb8000000-0xc1ffffff 64bit pref]
[ 1.011698] pci 0000:00:1b.0: PCI bridge to [bus 02]
[ 1.011704] pci 0000:00:1b.3: PCI bridge to [bus 03]
[ 1.011705] pci 0000:00:1b.3: bridge window [io 0xd000-0xdfff]
[ 1.011707] pci 0000:00:1b.3: bridge window [mem 0xdc300000-0xdc3fffff]
[ 1.011711] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 1.011717] pci 0000:00:1c.2: PCI bridge to [bus 05]
[ 1.011718] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
[ 1.011721] pci 0000:00:1c.2: bridge window [mem 0xdc200000-0xdc2fffff]
[ 1.011727] pci 0000:06:00.0: res[14]=[mem 0x00100000-0x001fffff]
res_to_dev_res add_size 400000 min_align 100000
[ 1.011727] pci 0000:06:00.0: res[14]=[mem 0x00100000-0x005fffff]
res_to_dev_res add_size 400000 min_align 100000
[ 1.011728] pci 0000:06:00.0: res[15]=[mem 0x00100000-0x000fffff
64bit pref] res_to_dev_res add_size 400000 min_align 100000
[ 1.011729] pci 0000:06:00.0: res[15]=[mem 0x00100000-0x004fffff
64bit pref] res_to_dev_res add_size 400000 min_align 100000
[ 1.011729] pci 0000:06:00.0: res[13]=[io 0x1000-0x0fff]
res_to_dev_res add_size 2000 min_align 1000
[ 1.011730] pci 0000:06:00.0: res[13]=[io 0x1000-0x2fff]
res_to_dev_res add_size 2000 min_align 1000
[ 1.011731] pci 0000:06:00.0: BAR 14: assigned [mem
0xc4000000-0xc44fffff]
[ 1.011732] pci 0000:06:00.0: BAR 15: assigned [mem
0x90000000-0x903fffff 64bit pref]
[ 1.011733] pci 0000:06:00.0: BAR 13: assigned [io 0x2000-0x3fff]
[ 1.011735] pci 0000:07:01.0: res[14]=[mem 0x00100000-0x000fffff]
res_to_dev_res add_size 200000 min_align 100000
[ 1.011735] pci 0000:07:01.0: res[14]=[mem 0x00100000-0x002fffff]
res_to_dev_res add_size 200000 min_align 100000
[ 1.011736] pci 0000:07:01.0: res[15]=[mem 0x00100000-0x000fffff
64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1.011737] pci 0000:07:01.0: res[15]=[mem 0x00100000-0x002fffff
64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1.011737] pci 0000:07:04.0: res[14]=[mem 0x00100000-0x000fffff]
res_to_dev_res add_size 200000 min_align 100000
[ 1.011738] pci 0000:07:04.0: res[14]=[mem 0x00100000-0x002fffff]
res_to_dev_res add_size 200000 min_align 100000
[ 1.011739] pci 0000:07:04.0: res[15]=[mem 0x00100000-0x000fffff
64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1.011739] pci 0000:07:04.0: res[15]=[mem 0x00100000-0x002fffff
64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 1.011740] pci 0000:07:01.0: res[13]=[io 0x1000-0x0fff]
res_to_dev_res add_size 1000 min_align 1000
[ 1.011741] pci 0000:07:01.0: res[13]=[io 0x1000-0x1fff]
res_to_dev_res add_size 1000 min_align 1000
[ 1.011741] pci 0000:07:04.0: res[13]=[io 0x1000-0x0fff]
res_to_dev_res add_size 1000 min_align 1000
[ 1.011742] pci 0000:07:04.0: res[13]=[io 0x1000-0x1fff]
res_to_dev_res add_size 1000 min_align 1000
[ 1.011743] pci 0000:07:01.0: BAR 14: assigned [mem
0xc4000000-0xc41fffff]
[ 1.011744] pci 0000:07:01.0: BAR 15: assigned [mem
0x90000000-0x901fffff 64bit pref]
[ 1.011744] pci 0000:07:02.0: BAR 14: assigned [mem
0xc4200000-0xc42fffff]
[ 1.011745] pci 0000:07:04.0: BAR 14: assigned [mem
0xc4300000-0xc44fffff]
[ 1.011746] pci 0000:07:04.0: BAR 15: assigned [mem
0x90200000-0x903fffff 64bit pref]
[ 1.011747] pci 0000:07:01.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 1.011747] pci 0000:07:04.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 1.011748] pci 0000:07:00.0: PCI bridge to [bus 08]
[ 1.011758] pci 0000:07:01.0: PCI bridge to [bus 09]
[ 1.011759] pci 0000:07:01.0: bridge window [io 0x2000-0x2fff]
[ 1.011763] pci 0000:07:01.0: bridge window [mem 0xc4000000-0xc41fffff]
[ 1.011765] pci 0000:07:01.0: bridge window [mem
0x90000000-0x901fffff 64bit pref]
[ 1.011770] pci 0000:0a:00.0: BAR 0: assigned [mem 0xc4200000-0xc420ffff]
[ 1.011774] pci 0000:07:02.0: PCI bridge to [bus 0a]
[ 1.011778] pci 0000:07:02.0: bridge window [mem 0xc4200000-0xc42fffff]
[ 1.011784] pci 0000:07:04.0: PCI bridge to [bus 0b]
[ 1.011786] pci 0000:07:04.0: bridge window [io 0x3000-0x3fff]
[ 1.011789] pci 0000:07:04.0: bridge window [mem 0xc4300000-0xc44fffff]
[ 1.011792] pci 0000:07:04.0: bridge window [mem
0x90200000-0x903fffff 64bit pref]
[ 1.011796] pci 0000:06:00.0: PCI bridge to [bus 07-0b]
[ 1.011798] pci 0000:06:00.0: bridge window [io 0x2000-0x3fff]
[ 1.011801] pci 0000:06:00.0: bridge window [mem 0xc4000000-0xc44fffff]
[ 1.011804] pci 0000:06:00.0: bridge window [mem
0x90000000-0x903fffff 64bit pref]
[ 1.011808] pci 0000:00:1c.4: PCI bridge to [bus 06-70]
[ 1.011809] pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff]
[ 1.011811] pci 0000:00:1c.4: bridge window [mem 0xc4000000-0xda0fffff]
[ 1.011813] pci 0000:00:1c.4: bridge window [mem
0x90000000-0xb1ffffff 64bit pref]
[ 1.011816] pci 0000:00:1d.0: PCI bridge to [bus 71]
[ 1.011822] pci 0000:00:1d.4: PCI bridge to [bus 72]
[ 1.011830] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.011831] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.011832] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff
window]
[ 1.011832] pci_bus 0000:00: resource 7 [mem 0x71800000-0xdfffffff
window]
[ 1.011833] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff
window]
[ 1.011833] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 1.011834] pci_bus 0000:01: resource 1 [mem 0xdb000000-0xdc0fffff]
[ 1.011834] pci_bus 0000:01: resource 2 [mem 0xb8000000-0xc1ffffff
64bit pref]
[ 1.011835] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 1.011836] pci_bus 0000:03: resource 1 [mem 0xdc300000-0xdc3fffff]
[ 1.011836] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 1.011837] pci_bus 0000:05: resource 1 [mem 0xdc200000-0xdc2fffff]
[ 1.011837] pci_bus 0000:06: resource 0 [io 0x2000-0x3fff]
[ 1.011838] pci_bus 0000:06: resource 1 [mem 0xc4000000-0xda0fffff]
[ 1.011838] pci_bus 0000:06: resource 2 [mem 0x90000000-0xb1ffffff
64bit pref]
[ 1.011839] pci_bus 0000:07: resource 0 [io 0x2000-0x3fff]
[ 1.011840] pci_bus 0000:07: resource 1 [mem 0xc4000000-0xc44fffff]
[ 1.011840] pci_bus 0000:07: resource 2 [mem 0x90000000-0x903fffff
64bit pref]
[ 1.011841] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
[ 1.011841] pci_bus 0000:09: resource 1 [mem 0xc4000000-0xc41fffff]
[ 1.011842] pci_bus 0000:09: resource 2 [mem 0x90000000-0x901fffff
64bit pref]
[ 1.011842] pci_bus 0000:0a: resource 1 [mem 0xc4200000-0xc42fffff]
[ 1.011843] pci_bus 0000:0b: resource 0 [io 0x3000-0x3fff]
[ 1.011843] pci_bus 0000:0b: resource 1 [mem 0xc4300000-0xc44fffff]
[ 1.011844] pci_bus 0000:0b: resource 2 [mem 0x90200000-0x903fffff
64bit pref]
[ 1.011859] NET: Registered protocol family 2
[ 1.012010] TCP established hash table entries: 524288 (order: 10,
4194304 bytes)
[ 1.012391] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.012469] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.012496] UDP hash table entries: 32768 (order: 8, 1048576 bytes)
[ 1.012592] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
[ 1.012691] NET: Registered protocol family 1
[ 1.041112] pci 0000:01:00.0: Video device with shadowed ROM at [mem
0x000c0000-0x000dffff]
[ 1.041186] pci 0000:06:00.0: enabling device (0000 -> 0003)
[ 1.041216] pci 0000:07:02.0: enabling device (0000 -> 0002)
[ 1.041246] pci 0000:0a:00.0: enabling device (0000 -> 0002)
[ 1.041315] PCI: CLS 0 bytes, default 64
[ 1.041336] Unpacking initramfs...
[ 1.096225] Freeing initrd memory: 6496K (ffff88003733f000 -
ffff880037997000)
[ 1.096245] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.096246] software IO TLB [mem 0x657d1000-0x697d1000] (64MB) mapped
at [ffff8800657d1000-ffff8800697d0fff]
[ 1.096712] Scanning for low memory corruption every 60 seconds
[ 1.096883] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 1.097121] Initialise system trusted keyrings
[ 1.097409] workingset: timestamp_bits=40 max_order=24 bucket_order=0
[ 1.098319] zbud: loaded
[ 1.098459] Key type big_key registered
[ 1.098932] Key type asymmetric registered
[ 1.098949] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 249)
[ 1.099057] io scheduler noop registered
[ 1.099058] io scheduler deadline registered
[ 1.099062] io scheduler cfq registered (default)
[ 1.099471] pcieport 0000:00:1c.2: enabling device (0000 -> 0003)
[ 1.099932] pcieport 0000:07:01.0: enabling device (0000 -> 0003)
[ 1.100126] pcieport 0000:07:04.0: enabling device (0000 -> 0003)
[ 1.100245] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.100248] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.100254] efifb: probing for efifb
[ 1.100261] efifb: framebuffer at 0xc1000000, using 3072k, total 3072k
[ 1.100262] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 1.100262] efifb: scrolling: redraw
[ 1.100263] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.101369] Console: switching to colour frame buffer device 128x48
[ 1.102476] fb0: EFI VGA frame buffer device
[ 1.102480] intel_idle: MWAIT substates: 0x142120
[ 1.102480] intel_idle: v0.4.1 model 0x5E
[ 1.102671] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.102778] GHES: HEST is not enabled!
[ 1.102824] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.103198] Linux agpgart interface v0.103
[ 1.103580] rtc_cmos 00:03: RTC can wake from S4
[ 1.103956] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.104041] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes
nvram, hpet irqs
[ 1.104044] intel_pstate: Intel P-state driver initializing
[ 1.104440] intel_pstate: HWP enabled
[ 1.104625] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.104809] NET: Registered protocol family 10
[ 1.105190] NET: Registered protocol family 17
[ 1.105360] microcode: sig=0x506e3, pf=0x2, revision=0x9e
[ 1.105677] microcode: Microcode Update Driver: v2.01
<tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 1.105836] registered taskstats version 1
[ 1.105837] Loading compiled-in X.509 certificates
[ 1.105844] zswap: loaded using pool lzo/zbud
[ 1.108883] Magic number: 8:901:446
[ 1.109209] rtc_cmos 00:03: setting system clock to 2016-11-05
20:26:17 UTC (1478377577)
[ 1.109241] PM: Hibernation image not present or could not be loaded.
[ 1.109941] Freeing unused kernel memory: 1256K (ffffffff81908000 -
ffffffff81a42000)
[ 1.109941] Write protecting the kernel read-only data: 8192k
[ 1.110428] Freeing unused kernel memory: 136K (ffff8800017de000 -
ffff880001800000)
[ 1.115087] random: systemd-tmpfile: uninitialized urandom read (16
bytes read)
[ 1.116077] random: systemd-udevd: uninitialized urandom read (16
bytes read)
[ 1.116100] random: systemd-udevd: uninitialized urandom read (16
bytes read)
[ 1.116442] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.116451] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.117558] random: systemd-udevd: uninitialized urandom read (16
bytes read)
[ 1.117567] random: systemd-udevd: uninitialized urandom read (16
bytes read)
[ 1.117570] random: systemd-udevd: uninitialized urandom read (16
bytes read)
[ 1.117714] random: systemd-udevd: uninitialized urandom read (16
bytes read)
[ 1.117724] random: systemd-udevd: uninitialized urandom read (16
bytes read)
[ 1.144516] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.145664] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.145685] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.159210] ACPI: bus type USB registered
[ 1.159221] usbcore: registered new interface driver usbfs
[ 1.159230] usbcore: registered new interface driver hub
[ 1.159278] usbcore: registered new device driver usb
[ 1.159420] SCSI subsystem initialized
[ 1.161373] libata version 3.00 loaded.
[ 1.161400] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.161419] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
bus number 1
[ 1.162876] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version
0x100 quirks 0x00109810
[ 1.162881] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.163078] hub 1-0:1.0: USB hub found
[ 1.163113] hub 1-0:1.0: 16 ports detected
[ 1.172477] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.172479] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
bus number 2
[ 1.172625] hub 2-0:1.0: USB hub found
[ 1.172644] hub 2-0:1.0: 10 ports detected
[ 1.176377] usb: port power management may be unreliable
[ 1.177992] ahci 0000:00:17.0: version 3.0
[ 1.178050] xhci_hcd 0000:0a:00.0: xHCI Host Controller
[ 1.178052] xhci_hcd 0000:0a:00.0: new USB bus registered, assigned
bus number 3
[ 1.179326] xhci_hcd 0000:0a:00.0: hcc params 0x200077c1 hci version
0x110 quirks 0x00009810
[ 1.179727] hub 3-0:1.0: USB hub found
[ 1.179731] hub 3-0:1.0: 2 ports detected
[ 1.179818] xhci_hcd 0000:0a:00.0: xHCI Host Controller
[ 1.179820] xhci_hcd 0000:0a:00.0: new USB bus registered, assigned
bus number 4
[ 1.180140] hub 4-0:1.0: USB hub found
[ 1.180177] hub 4-0:1.0: 2 ports detected
[ 1.188494] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps
0x3f impl SATA mode
[ 1.188495] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only
pio slum part ems deso sadm sds apst
[ 1.240580] scsi host0: ahci
[ 1.241175] scsi host1: ahci
[ 1.241767] scsi host2: ahci
[ 1.242345] scsi host3: ahci
[ 1.242906] scsi host4: ahci
[ 1.243457] scsi host5: ahci
[ 1.243634] ata1: SATA max UDMA/133 abar m2048@0xda14b000 port
0xda14b100 irq 128
[ 1.243638] ata2: SATA max UDMA/133 abar m2048@0xda14b000 port
0xda14b180 irq 128
[ 1.243642] ata3: SATA max UDMA/133 abar m2048@0xda14b000 port
0xda14b200 irq 128
[ 1.243645] ata4: SATA max UDMA/133 abar m2048@0xda14b000 port
0xda14b280 irq 128
[ 1.243649] ata5: SATA max UDMA/133 abar m2048@0xda14b000 port
0xda14b300 irq 128
[ 1.243652] ata6: SATA max UDMA/133 abar m2048@0xda14b000 port
0xda14b380 irq 128
[ 1.244097] ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled
[ 1.244157] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps
0x3 impl SATA mode
[ 1.244162] ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp
pio slum part ccc sxs
[ 1.245240] scsi host6: ahci
[ 1.245657] scsi host7: ahci
[ 1.245813] ata7: SATA max UDMA/133 abar m512@0xdc310000 port
0xdc310100 irq 130
[ 1.245818] ata8: SATA max UDMA/133 abar m512@0xdc310000 port
0xdc310180 irq 130
[ 1.491642] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.558506] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.559259] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.559315] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.559438] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.559482] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.559550] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.559554] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.560086] ata1.00: NCQ Send/Recv Log not supported
[ 1.560090] ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max
UDMA/133
[ 1.560093] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 1.560420] ata3.00: supports DRM functions and may not be fully
accessible
[ 1.560472] ata2.00: NCQ Send/Recv Log not supported
[ 1.560477] ata2.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max
UDMA/133
[ 1.560481] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 1.560636] ata4.00: ATA-8: ST4000DM000-1F2168, CC52, max UDMA/133
[ 1.560640] ata4.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 1.560683] ata5.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133
[ 1.560687] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 1.560700] ata1.00: NCQ Send/Recv Log not supported
[ 1.560707] ata1.00: configured for UDMA/133
[ 1.560863] ata3.00: NCQ Send/Recv Log not supported
[ 1.560868] ata3.00: ATA-9: Samsung SSD 840 EVO 1TB, EXT0BB6Q, max
UDMA/133
[ 1.560873] ata3.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth
31/32), AA
[ 1.561015] ata6.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133
[ 1.561018] ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 1.561067] ata2.00: NCQ Send/Recv Log not supported
[ 1.561076] ata2.00: configured for UDMA/133
[ 1.561248] ata3.00: supports DRM functions and may not be fully
accessible
[ 1.561534] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840
6B0Q PQ: 0 ANSI: 5
[ 1.561620] ata4.00: configured for UDMA/133
[ 1.561681] ata3.00: NCQ Send/Recv Log not supported
[ 1.561689] ata3.00: configured for UDMA/133
[ 1.561924] ata5.00: configured for UDMA/133
[ 1.562695] ata6.00: configured for UDMA/133
[ 1.599281] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840
6B0Q PQ: 0 ANSI: 5
[ 1.623106] hub 1-1:1.0: USB hub found
[ 1.623163] hub 1-1:1.0: 4 ports detected
[ 1.652807] scsi 2:0:0:0: Direct-Access ATA Samsung SSD 840
BB6Q PQ: 0 ANSI: 5
[ 1.702916] scsi 3:0:0:0: Direct-Access ATA ST4000DM000-1F21 CC52
PQ: 0 ANSI: 5
[ 1.735132] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.742785] scsi 4:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2
ABB0 PQ: 0 ANSI: 5
[ 1.756386] hub 2-1:1.0: USB hub found
[ 1.756694] hub 2-1:1.0: 4 ports detected
[ 1.786296] scsi 5:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2
ABB0 PQ: 0 ANSI: 5
[ 1.921824] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[ 2.054865] hub 1-3:1.0: USB hub found
[ 2.055213] hub 1-3:1.0: 3 ports detected
[ 2.108466] tsc: Refined TSC clocksource calibration: 3600.002 MHz
[ 2.108482] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x33e4559ce44, max_idle_ns: 440795364889 ns
[ 2.136613] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.143693] ata1.00: Enabling discard_zeroes_data
[ 2.143713] ata2.00: Enabling discard_zeroes_data
[ 2.143748] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256
GB/238 GiB)
[ 2.143779] sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128
GB/119 GiB)
[ 2.143811] sd 5:0:0:0: [sdf] 3907029168 512-byte logical blocks:
(2.00 TB/1.82 TiB)
[ 2.143812] sd 5:0:0:0: [sdf] 4096-byte physical blocks
[ 2.143856] sd 3:0:0:0: [sdd] 7814037168 512-byte logical blocks:
(4.00 TB/3.64 TiB)
[ 2.143857] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks:
(1.00 TB/932 GiB)
[ 2.143858] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[ 2.143976] sd 4:0:0:0: [sde] 3907029168 512-byte logical blocks:
(2.00 TB/1.82 TiB)
[ 2.143977] sd 4:0:0:0: [sde] 4096-byte physical blocks
[ 2.144178] sd 0:0:0:0: [sda] Write Protect is off
[ 2.144179] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.144227] sd 3:0:0:0: [sdd] Write Protect is off
[ 2.144228] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.144250] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.144286] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.144286] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.144353] sd 5:0:0:0: [sdf] Write Protect is off
[ 2.144355] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 2.144371] sd 2:0:0:0: [sdc] Write Protect is off
[ 2.144372] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.144380] sd 3:0:0:0: [sdd] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.144387] ata1.00: Enabling discard_zeroes_data
[ 2.144407] sd 1:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.144421] sd 2:0:0:0: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.144434] sd 4:0:0:0: [sde] Write Protect is off
[ 2.144435] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 2.144475] sd 4:0:0:0: [sde] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.144601] sd 5:0:0:0: [sdf] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.144606] ata2.00: Enabling discard_zeroes_data
[ 2.146447] sda: sda1 sda2 sda3 sda4 sda5
[ 2.146801] ata1.00: Enabling discard_zeroes_data
[ 2.147198] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.147258] sdb: sdb1 sdb2
[ 2.147442] ata2.00: Enabling discard_zeroes_data
[ 2.147759] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.147900] sdc: sdc1 sdc2
[ 2.148622] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 2.158007] random: fast init done
[ 2.175015] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[ 2.178100] sde: sde1
[ 2.179450] sd 4:0:0:0: [sde] Attached SCSI disk
[ 2.203121] GPT:disk_guids don't match.
[ 2.203124] GPT:partition_entry_array_crc32 values don't match:
0xa45bd3ef != 0x6849bdb5
[ 2.203126] GPT: Use GNU Parted to correct GPT errors.
[ 2.203144] sdf: sdf1
[ 2.204157] sd 5:0:0:0: [sdf] Attached SCSI disk
[ 2.213046] sdd: sdd1 sdd2
[ 2.213948] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 2.308952] hub 1-5:1.0: USB hub found
[ 2.309248] hub 1-5:1.0: 4 ports detected
[ 2.378344] usb 1-3.2: new full-speed USB device number 5 using xhci_hcd
[ 2.580579] EXT4-fs (sdb2): mounted filesystem with ordered data
mode. Opts: (null)
[ 2.588436] usb 1-7: new full-speed USB device number 6 using xhci_hcd
[ 2.689932] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.741070] systemd[1]: systemd 231 running in system mode. (+PAM
-AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP
+GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 2.741180] systemd[1]: Detected architecture x86-64.
[ 2.741387] systemd[1]: Set hostname to <dev.luketic>.
[ 2.791709] usb 1-3.3: new full-speed USB device number 7 using xhci_hcd
[ 2.795787] systemd[1]: Listening on udev Kernel Socket.
[ 2.795991] systemd[1]: Created slice User and Session Slice.
[ 2.796055] systemd[1]: Created slice System Slice.
[ 2.796087] systemd[1]: Reached target Slices.
[ 2.796116] systemd[1]: Reached target Login Prompts.
[ 2.796157] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 2.798907] systemd[1]: Listening on /dev/initctl Compatibility Named
Pipe.
[ 2.826984] EXT4-fs (sdb2): re-mounted. Opts: data=ordered
[ 2.963909] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 2.963911] ACPI: Sleep Button [SLPB]
[ 2.963958] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 2.963959] ACPI: Power Button [PWRB]
[ 2.963984] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 2.963985] ACPI: Power Button [PWRF]
[ 2.981923] FUJITSU Extended Socket Network Device Driver - version
1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 2.989726] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.995882] wmi: Mapper loaded
[ 3.003970] Bluetooth: Core ver 2.21
[ 3.003979] NET: Registered protocol family 31
[ 3.003979] Bluetooth: HCI device and connection manager initialized
[ 3.003981] Bluetooth: HCI socket layer initialized
[ 3.003983] Bluetooth: L2CAP socket layer initialized
[ 3.003986] Bluetooth: SCO socket layer initialized
[ 3.005043] usb 1-8: new full-speed USB device number 8 using xhci_hcd
[ 3.006630] systemd-journald[227]: Received request to flush runtime
journal from PID 1
[ 3.046969] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.046970] ACPI: Thermal Zone [TZ00] (28 C)
[ 3.047124] thermal LNXTHERM:01: registered as thermal_zone1
[ 3.047124] ACPI: Thermal Zone [TZ01] (30 C)
[ 3.047153] Bluetooth: HCI UART driver ver 2.3
[ 3.047154] Bluetooth: HCI UART protocol H4 registered
[ 3.047154] Bluetooth: HCI UART protocol BCSP registered
[ 3.047154] Bluetooth: HCI UART protocol LL registered
[ 3.047155] Bluetooth: HCI UART protocol ATH3K registered
[ 3.047155] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 3.047190] Bluetooth: HCI UART protocol Intel registered
[ 3.047198] Bluetooth: HCI UART protocol BCM registered
[ 3.047199] Bluetooth: HCI UART protocol QCA registered
[ 3.047200] Bluetooth: HCI UART protocol AG6XX registered
[ 3.056398] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 3.058645] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.061226] EDAC MC: Ver: 3.0.0
[ 3.061350] i801_smbus 0000:00:1f.4: enabling device (0001 -> 0003)
[ 3.061531] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 3.065602] random: crng init done
[ 3.065620] pps_core: LinuxPPS API ver. 1 registered
[ 3.065620] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giometti@xxxxxxxx>
[ 3.067386] PTP clock support registered
[ 3.069345] EDAC MC0: Giving out device to module ie31200_edac
controller IE31200: DEV 0000:00:00.0 (POLLED)
[ 3.085141] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 3.086958] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters,
655360 ms ovfl timer
[ 3.086959] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 3.086960] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 3.086960] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 3.086961] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 3.086961] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 3.090779] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 3.090780] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 3.097027] [drm] Initialized drm 1.1.0 20060810
[ 3.103081] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec)
set to dynamic conservative mode
[ 3.111434] AVX2 version of gcm_enc/dec engaged.
[ 3.111435] AES CTR mode by8 optimization enabled
[ 3.122073] clocksource: Switched to clocksource tsc
[ 3.146245] iTCO_vendor_support: vendor-support=0
[ 3.148304] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 3.148449] iTCO_wdt: Found a Intel PCH TCO device (Version=4,
TCOBASE=0x0400)
[ 3.148614] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.148982] intel_rapl: Found RAPL domain package
[ 3.148983] intel_rapl: Found RAPL domain core
[ 3.148985] intel_rapl: Found RAPL domain dram
[ 3.154251] usbcore: registered new interface driver usbhid
[ 3.154252] usbhid: USB HID core driver
[ 3.154284] media: Linux media interface: v0.10
[ 3.157190] input: Logitech Gaming Mouse G502 as
/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:046D:C07D.0001/input/input7
[ 3.157372] hid-generic 0003:046D:C07D.0001: input,hidraw0: USB HID
v1.11 Mouse [Logitech Gaming Mouse G502] on usb-0000:00:14.0-7/input0
[ 3.157392] Linux video capture interface: v2.00
[ 3.158292] input: Logitech Gaming Mouse G502 as
/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:046D:C07D.0002/input/input8
[ 3.158898] gspca_main: v2.14.0 registered
[ 3.159040] input: ROCCAT ROCCAT Ryos MK Pro as
/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.0/0003:1E7D:3232.0003/input/input9
[ 3.160050] gspca_main: gspca_zc3xx-2.14.0 probing 046d:08ad
[ 3.193974] nvidia: loading out-of-tree module taints kernel.
[ 3.193978] nvidia: module license 'NVIDIA' taints kernel.
[ 3.193978] Disabling lock debugging due to kernel taint
[ 3.199448] vgaarb: device changed decodes:
PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 3.199495] nvidia-nvlink: Nvlink Core is being initialized, major
device number 239
[ 3.199504] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 375.10
Fri Oct 14 10:30:06 PDT 2016 (using threaded interrupts)
[ 3.204645] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver
for UNIX platforms 375.10 Fri Oct 14 10:05:55 PDT 2016
[ 3.205786] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 3.215102] hid-generic 0003:046D:C07D.0002: input,hiddev0,hidraw1:
USB HID v1.11 Keyboard [Logitech Gaming Mouse G502] on
usb-0000:00:14.0-7/input1
[ 3.215288] input: RODE Microphones RODE NT-USB as
/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.3/0003:19F7:0003.0005/input/input10
[ 3.227116] md: bind<sde1>
[ 3.260377] md: bind<sdf1>
[ 3.265152] md: raid10 personality registered for level 10
[ 3.265305] md/raid10:md127: not clean -- starting background
reconstruction
[ 3.265306] md/raid10:md127: active with 2 out of 2 devices
[ 3.265354] created bitmap (15 pages) for device md127
[ 3.265904] md127: bitmap initialized from disk: read 1 pages, set
17142 of 29807 bits
[ 3.271712] ryos 0003:1E7D:3232.0003: input,hidraw2: USB HID v1.11
Keyboard [ROCCAT ROCCAT Ryos MK Pro] on usb-0000:00:14.0-3.3/input0
[ 3.294230] input: ROCCAT ROCCAT Ryos MK Pro as
/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.1/0003:1E7D:3232.0004/input/input11
[ 3.328364] hid-generic 0003:19F7:0003.0005: input,hiddev0,hidraw3:
USB HID v1.00 Device [RODE Microphones RODE NT-USB] on
usb-0000:00:14.0-8/input3
[ 3.344809] md127: detected capacity change from 0 to 2000263577600
[ 3.385022] ryos 0003:1E7D:3232.0004: input,hiddev0,hidraw4: USB HID
v1.11 Pointer [ROCCAT ROCCAT Ryos MK Pro] on usb-0000:00:14.0-3.3/input1
[ 3.385065] mousedev: PS/2 mouse device common for all mice
[ 3.528818] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized):
registered PHC clock
[ 3.615666] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1)
40:8d:5c:e2:ab:79
[ 3.615670] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network
Connection
[ 3.615753] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No:
FFFFFF-0FF
[ 3.616046] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 3.616048] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio
client
[ 3.617523] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[ 3.633037] snd_hda_codec_ca0132 hdaudioC0D0: autoconfig for CA0132:
line_outs=1 (0xb/0x0/0x0/0x0/0x0) type:line
[ 3.633038] snd_hda_codec_ca0132 hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 3.633039] snd_hda_codec_ca0132 hdaudioC0D0: hp_outs=1
(0x10/0x0/0x0/0x0/0x0)
[ 3.633039] snd_hda_codec_ca0132 hdaudioC0D0: mono: mono_out=0x0
[ 3.633040] snd_hda_codec_ca0132 hdaudioC0D0: dig-out=0xc/0x0
[ 3.633040] snd_hda_codec_ca0132 hdaudioC0D0: inputs:
[ 3.633041] snd_hda_codec_ca0132 hdaudioC0D0: Mic=0x12
[ 3.633041] snd_hda_codec_ca0132 hdaudioC0D0: Line=0x11
[ 3.931157] NVRM: Your system is not currently configured to drive a
VGA console
[ 3.931161] NVRM: on the primary VGA device. The NVIDIA Linux
graphics driver
[ 3.931163] NVRM: requires the use of a text-mode VGA console. Use of
other console
[ 3.931165] NVRM: drivers including, but not limited to, vesafb, may
result in
[ 3.931166] NVRM: corruption and stability problems, and is not
supported.
[ 3.933054] nvidia-modeset: Allocated GPU:0
(GPU-446ab0ba-a3a7-d22e-51af-ccc1c8b89978) @ PCI:0000:01:00.0
[ 4.199124] input: gspca_zc3xx as
/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/input/input13
[ 4.199466] usbcore: registered new interface driver gspca_zc3xx
[ 4.211219] usbcore: registered new interface driver snd-usb-audio
[ 4.225163] snd_hda_codec_ca0132 hdaudioC0D0: ca0132 DSP downloaded
and running
[ 4.232110] input: HDA NVidia HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 4.232150] input: HDA NVidia HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 4.232183] input: HDA NVidia HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 4.232442] input: HDA NVidia HDMI/DP,pcm=9 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 4.581159] input: HDA Intel PCH Front Line Out as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 4.581300] input: HDA Intel PCH Line Out as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 4.581425] input: HDA Intel PCH Front Headphone as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 5.375225] snd_hda_codec_ca0132 hdaudioC0D0: ca0132 DSP downloaded
and running
On 05.11.2016 21:20, Phil Turmel wrote:
On 11/05/2016 10:10 AM, Darko Luketic wrote:
Now. I'd like to save whatever data is possible to be saved.
I'd like to force the 2 drives to be recognized as being in a RAID10
array. By whatever means necessary, without losing more data.
You haven't provided anywhere near enough data to advise you. At the
very least, provide "mdadm -E /dev/sdXn" for each member device and your
dmesg from the current environment, plus syslogs showing the last
assembly of the raid10 you think you want. Paste inline, please.
If you can, run lsdrv[1] on your current environment and paste that in
your reply as well.
Phil
[1] https://github.com/pturmel/lsdrv
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
