Re: moving spares into group and checking spares

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Sep 14, 2016 at 4:59 PM, scar <scar@xxxxxxxxxx> wrote:
> Chris Murphy wrote on 09/14/2016 03:33 PM:
>>
>> SCT ERC value is less than SCSI command timer value?
>
>
>
> they are 1TB Hitachi HUA7210SASUN drives in Sun Fire X4540 with SCT ERC
> value of 255 (25.5 seconds) and /sys/block/sdX/device/timeout is set to 30

Interesting choice, I haven't seen it cut that closely before, but it
ought to work. The value I most often see is 70 deciseconds which for
sure will fail, if it's going to, well before the command timer gives
up.


-- 
Chris Murphy
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux