> What does smartctl report on sdc and sde (I think you want smartctl -x,
> the extended "display everything" command)?
[root@lamachine ~]# smartctl -x /dev/{sdc,sdd,sde}
smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.3.3-303.fc23.x86_64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
ERROR: smartctl takes ONE device name as the final command-line argument.
You have provided 3 device names:
/dev/sdc
/dev/sdd
/dev/sde
Use smartctl -h to get a usage summary
[root@lamachine ~]# smartctl -x /dev/sdc
smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.3.3-303.fc23.x86_64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Green
Device Model: WDC WD30EZRX-00D8PB0
Serial Number: WD-WCC4NCWT13RF
LU WWN Device Id: 5 0014ee 25fc9e460
Firmware Version: 80.00A80
User Capacity: 3,000,591,900,160 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Sep 13 07:53:18 2016 BST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (38940) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 391) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 177 177 021 - 6116
4 Start_Stop_Count -O--CK 100 100 000 - 41
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 085 085 000 - 11128
10 Spin_Retry_Count -O--CK 100 253 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 41
192 Power-Off_Retract_Count -O--CK 200 200 000 - 20
193 Load_Cycle_Count -O--CK 142 142 000 - 175500
194 Temperature_Celsius -O---K 123 114 000 - 27
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 200 200 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 27 Celsius
Power Cycle Min/Max Temperature: 23/27 Celsius
Lifetime Min/Max Temperature: 15/36 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (376)
Index Estimated Time Temperature Celsius
377 2016-09-12 23:56 ? -
378 2016-09-12 23:57 23 ****
379 2016-09-12 23:58 24 *****
... ..( 4 skipped). .. *****
384 2016-09-13 00:03 24 *****
385 2016-09-13 00:04 25 ******
386 2016-09-13 00:05 25 ******
387 2016-09-13 00:06 25 ******
388 2016-09-13 00:07 26 *******
... ..( 2 skipped). .. *******
391 2016-09-13 00:10 26 *******
392 2016-09-13 00:11 27 ********
... ..( 7 skipped). .. ********
400 2016-09-13 00:19 27 ********
401 2016-09-13 00:20 29 **********
402 2016-09-13 00:21 28 *********
... ..( 4 skipped). .. *********
407 2016-09-13 00:26 28 *********
408 2016-09-13 00:27 29 **********
... ..( 4 skipped). .. **********
413 2016-09-13 00:32 29 **********
414 2016-09-13 00:33 30 ***********
... ..( 5 skipped). .. ***********
420 2016-09-13 00:39 30 ***********
421 2016-09-13 00:40 31 ************
... ..( 23 skipped). .. ************
445 2016-09-13 01:04 31 ************
446 2016-09-13 01:05 32 *************
... ..( 24 skipped). .. *************
471 2016-09-13 01:30 32 *************
472 2016-09-13 01:31 ? -
473 2016-09-13 01:32 33 **************
474 2016-09-13 01:33 32 *************
... ..( 9 skipped). .. *************
6 2016-09-13 01:43 32 *************
7 2016-09-13 01:44 33 **************
... ..( 20 skipped). .. **************
28 2016-09-13 02:05 33 **************
29 2016-09-13 02:06 32 *************
30 2016-09-13 02:07 32 *************
31 2016-09-13 02:08 32 *************
32 2016-09-13 02:09 33 **************
33 2016-09-13 02:10 32 *************
... ..( 62 skipped). .. *************
96 2016-09-13 03:13 32 *************
97 2016-09-13 03:14 ? -
98 2016-09-13 03:15 24 *****
... ..( 4 skipped). .. *****
103 2016-09-13 03:20 24 *****
104 2016-09-13 03:21 25 ******
105 2016-09-13 03:22 25 ******
106 2016-09-13 03:23 25 ******
107 2016-09-13 03:24 26 *******
... ..( 2 skipped). .. *******
110 2016-09-13 03:27 26 *******
111 2016-09-13 03:28 27 ********
... ..( 6 skipped). .. ********
118 2016-09-13 03:35 27 ********
119 2016-09-13 03:36 28 *********
... ..( 11 skipped). .. *********
131 2016-09-13 03:48 28 *********
132 2016-09-13 03:49 29 **********
... ..( 8 skipped). .. **********
141 2016-09-13 03:58 29 **********
142 2016-09-13 03:59 30 ***********
... ..( 11 skipped). .. ***********
154 2016-09-13 04:11 30 ***********
155 2016-09-13 04:12 31 ************
... ..( 42 skipped). .. ************
198 2016-09-13 04:55 31 ************
199 2016-09-13 04:56 ? -
200 2016-09-13 04:57 22 ***
201 2016-09-13 04:58 22 ***
202 2016-09-13 04:59 23 ****
203 2016-09-13 05:00 23 ****
204 2016-09-13 05:01 24 *****
205 2016-09-13 05:02 24 *****
206 2016-09-13 05:03 25 ******
... ..( 3 skipped). .. ******
210 2016-09-13 05:07 25 ******
211 2016-09-13 05:08 26 *******
212 2016-09-13 05:09 27 ********
... ..( 7 skipped). .. ********
220 2016-09-13 05:17 27 ********
221 2016-09-13 05:18 28 *********
... ..( 13 skipped). .. *********
235 2016-09-13 05:32 28 *********
236 2016-09-13 05:33 29 **********
... ..( 10 skipped). .. **********
247 2016-09-13 05:44 29 **********
248 2016-09-13 05:45 30 ***********
... ..( 16 skipped). .. ***********
265 2016-09-13 06:02 30 ***********
266 2016-09-13 06:03 31 ************
... ..( 96 skipped). .. ************
363 2016-09-13 07:40 31 ************
364 2016-09-13 07:41 ? -
365 2016-09-13 07:42 31 ************
366 2016-09-13 07:43 31 ************
367 2016-09-13 07:44 30 ***********
368 2016-09-13 07:45 30 ***********
369 2016-09-13 07:46 30 ***********
370 2016-09-13 07:47 31 ************
... ..( 5 skipped). .. ************
376 2016-09-13 07:53 31 ************
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 1280 Vendor specific
[root@lamachine ~]# smartctl -x /dev/sdd
smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.3.3-303.fc23.x86_64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Green
Device Model: WDC WD30EZRX-00D8PB0
Serial Number: WD-WCC4NPRDD6D7
LU WWN Device Id: 5 0014ee 25fca27b1
Firmware Version: 80.00A80
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Sep 13 07:53:20 2016 BST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (39060) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 392) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 176 176 021 - 6166
4 Start_Stop_Count -O--CK 100 100 000 - 41
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 085 085 000 - 11129
10 Spin_Retry_Count -O--CK 100 253 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 41
192 Power-Off_Retract_Count -O--CK 200 200 000 - 27
193 Load_Cycle_Count -O--CK 137 137 000 - 191240
194 Temperature_Celsius -O---K 123 114 000 - 27
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 200 200 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 27 Celsius
Power Cycle Min/Max Temperature: 23/27 Celsius
Lifetime Min/Max Temperature: 15/36 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (401)
Index Estimated Time Temperature Celsius
402 2016-09-12 23:56 ? -
403 2016-09-12 23:57 23 ****
404 2016-09-12 23:58 23 ****
405 2016-09-12 23:59 24 *****
... ..( 3 skipped). .. *****
409 2016-09-13 00:03 24 *****
410 2016-09-13 00:04 25 ******
411 2016-09-13 00:05 25 ******
412 2016-09-13 00:06 25 ******
413 2016-09-13 00:07 26 *******
... ..( 2 skipped). .. *******
416 2016-09-13 00:10 26 *******
417 2016-09-13 00:11 27 ********
... ..( 7 skipped). .. ********
425 2016-09-13 00:19 27 ********
426 2016-09-13 00:20 28 *********
427 2016-09-13 00:21 29 **********
... ..( 10 skipped). .. **********
438 2016-09-13 00:32 29 **********
439 2016-09-13 00:33 30 ***********
... ..( 4 skipped). .. ***********
444 2016-09-13 00:38 30 ***********
445 2016-09-13 00:39 31 ************
... ..( 23 skipped). .. ************
469 2016-09-13 01:03 31 ************
470 2016-09-13 01:04 32 *************
... ..( 26 skipped). .. *************
19 2016-09-13 01:31 32 *************
20 2016-09-13 01:32 ? -
21 2016-09-13 01:33 33 **************
22 2016-09-13 01:34 32 *************
... ..( 11 skipped). .. *************
34 2016-09-13 01:46 32 *************
35 2016-09-13 01:47 33 **************
... ..( 11 skipped). .. **************
47 2016-09-13 01:59 33 **************
48 2016-09-13 02:00 32 *************
... ..( 73 skipped). .. *************
122 2016-09-13 03:14 32 *************
123 2016-09-13 03:15 ? -
124 2016-09-13 03:16 23 ****
125 2016-09-13 03:17 24 *****
... ..( 3 skipped). .. *****
129 2016-09-13 03:21 24 *****
130 2016-09-13 03:22 25 ******
131 2016-09-13 03:23 25 ******
132 2016-09-13 03:24 25 ******
133 2016-09-13 03:25 26 *******
134 2016-09-13 03:26 26 *******
135 2016-09-13 03:27 26 *******
136 2016-09-13 03:28 27 ********
... ..( 7 skipped). .. ********
144 2016-09-13 03:36 27 ********
145 2016-09-13 03:37 28 *********
... ..( 11 skipped). .. *********
157 2016-09-13 03:49 28 *********
158 2016-09-13 03:50 29 **********
... ..( 9 skipped). .. **********
168 2016-09-13 04:00 29 **********
169 2016-09-13 04:01 30 ***********
... ..( 12 skipped). .. ***********
182 2016-09-13 04:14 30 ***********
183 2016-09-13 04:15 31 ************
... ..( 40 skipped). .. ************
224 2016-09-13 04:56 31 ************
225 2016-09-13 04:57 ? -
226 2016-09-13 04:58 22 ***
227 2016-09-13 04:59 22 ***
228 2016-09-13 05:00 23 ****
229 2016-09-13 05:01 23 ****
230 2016-09-13 05:02 24 *****
231 2016-09-13 05:03 24 *****
232 2016-09-13 05:04 25 ******
... ..( 3 skipped). .. ******
236 2016-09-13 05:08 25 ******
237 2016-09-13 05:09 26 *******
238 2016-09-13 05:10 27 ********
... ..( 6 skipped). .. ********
245 2016-09-13 05:17 27 ********
246 2016-09-13 05:18 28 *********
... ..( 13 skipped). .. *********
260 2016-09-13 05:32 28 *********
261 2016-09-13 05:33 29 **********
... ..( 11 skipped). .. **********
273 2016-09-13 05:45 29 **********
274 2016-09-13 05:46 30 ***********
... ..( 20 skipped). .. ***********
295 2016-09-13 06:07 30 ***********
296 2016-09-13 06:08 31 ************
... ..( 92 skipped). .. ************
389 2016-09-13 07:41 31 ************
390 2016-09-13 07:42 ? -
391 2016-09-13 07:43 31 ************
... ..( 9 skipped). .. ************
401 2016-09-13 07:53 31 ************
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 1283 Vendor specific
[root@lamachine ~]# smartctl -x /dev/sde
smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.3.3-303.fc23.x86_64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Green
Device Model: WDC WD30EZRX-00D8PB0
Serial Number: WD-WCC4N1294906
LU WWN Device Id: 5 0014ee 25f968120
Firmware Version: 80.00A80
User Capacity: 3,000,591,900,160 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Sep 13 07:53:23 2016 BST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (43200) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 433) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 175 175 021 - 6208
4 Start_Stop_Count -O--CK 100 100 000 - 40
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 085 085 000 - 11141
10 Spin_Retry_Count -O--CK 100 253 000 - 0
11 Calibration_Retry_Count -O--CK 100 253 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 40
192 Power-Off_Retract_Count -O--CK 200 200 000 - 27
193 Load_Cycle_Count -O--CK 143 143 000 - 172837
194 Temperature_Celsius -O---K 123 113 000 - 27
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 200 200 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 27 Celsius
Power Cycle Min/Max Temperature: 23/27 Celsius
Lifetime Min/Max Temperature: 16/37 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (145)
Index Estimated Time Temperature Celsius
146 2016-09-12 23:56 ? -
147 2016-09-12 23:57 23 ****
148 2016-09-12 23:58 23 ****
149 2016-09-12 23:59 24 *****
... ..( 3 skipped). .. *****
153 2016-09-13 00:03 24 *****
154 2016-09-13 00:04 25 ******
155 2016-09-13 00:05 25 ******
156 2016-09-13 00:06 25 ******
157 2016-09-13 00:07 26 *******
158 2016-09-13 00:08 26 *******
159 2016-09-13 00:09 26 *******
160 2016-09-13 00:10 27 ********
... ..( 8 skipped). .. ********
169 2016-09-13 00:19 27 ********
170 2016-09-13 00:20 28 *********
... ..( 6 skipped). .. *********
177 2016-09-13 00:27 28 *********
178 2016-09-13 00:28 29 **********
... ..( 5 skipped). .. **********
184 2016-09-13 00:34 29 **********
185 2016-09-13 00:35 30 ***********
... ..( 5 skipped). .. ***********
191 2016-09-13 00:41 30 ***********
192 2016-09-13 00:42 31 ************
... ..( 25 skipped). .. ************
218 2016-09-13 01:08 31 ************
219 2016-09-13 01:09 32 *************
... ..( 20 skipped). .. *************
240 2016-09-13 01:30 32 *************
241 2016-09-13 01:31 ? -
242 2016-09-13 01:32 33 **************
243 2016-09-13 01:33 32 *************
... ..( 35 skipped). .. *************
279 2016-09-13 02:09 32 *************
280 2016-09-13 02:10 33 **************
... ..( 63 skipped). .. **************
344 2016-09-13 03:14 33 **************
345 2016-09-13 03:15 ? -
346 2016-09-13 03:16 23 ****
347 2016-09-13 03:17 24 *****
... ..( 3 skipped). .. *****
351 2016-09-13 03:21 24 *****
352 2016-09-13 03:22 25 ******
353 2016-09-13 03:23 25 ******
354 2016-09-13 03:24 25 ******
355 2016-09-13 03:25 26 *******
356 2016-09-13 03:26 26 *******
357 2016-09-13 03:27 26 *******
358 2016-09-13 03:28 27 ********
... ..( 5 skipped). .. ********
364 2016-09-13 03:34 27 ********
365 2016-09-13 03:35 28 *********
... ..( 9 skipped). .. *********
375 2016-09-13 03:45 28 *********
376 2016-09-13 03:46 29 **********
... ..( 5 skipped). .. **********
382 2016-09-13 03:52 29 **********
383 2016-09-13 03:53 30 ***********
... ..( 7 skipped). .. ***********
391 2016-09-13 04:01 30 ***********
392 2016-09-13 04:02 31 ************
... ..( 28 skipped). .. ************
421 2016-09-13 04:31 31 ************
422 2016-09-13 04:32 32 *************
... ..( 23 skipped). .. *************
446 2016-09-13 04:56 32 *************
447 2016-09-13 04:57 ? -
448 2016-09-13 04:58 22 ***
449 2016-09-13 04:59 22 ***
450 2016-09-13 05:00 23 ****
451 2016-09-13 05:01 23 ****
452 2016-09-13 05:02 24 *****
453 2016-09-13 05:03 24 *****
454 2016-09-13 05:04 25 ******
... ..( 3 skipped). .. ******
458 2016-09-13 05:08 25 ******
459 2016-09-13 05:09 26 *******
460 2016-09-13 05:10 27 ********
461 2016-09-13 05:11 28 *********
... ..( 12 skipped). .. *********
474 2016-09-13 05:24 28 *********
475 2016-09-13 05:25 29 **********
... ..( 6 skipped). .. **********
4 2016-09-13 05:32 29 **********
5 2016-09-13 05:33 30 ***********
... ..( 8 skipped). .. ***********
14 2016-09-13 05:42 30 ***********
15 2016-09-13 05:43 31 ************
... ..( 41 skipped). .. ************
57 2016-09-13 06:25 31 ************
58 2016-09-13 06:26 32 *************
... ..( 74 skipped). .. *************
133 2016-09-13 07:41 32 *************
134 2016-09-13 07:42 ? -
135 2016-09-13 07:43 32 *************
... ..( 9 skipped). .. *************
145 2016-09-13 07:53 32 *************
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 1285 Vendor specific
[root@lamachine ~]#
> And looking at the lsdrv stuff, were you using LVM? That's got a load of
> references to LV.
yes I was using LVM on top of raid
Thanks for the help so far guys!
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
