Mike has pushed a test version to sourceforge and github. If anybody's willing to clone the repository, compile and test that would be appreciated. For those who don't know this utility, once you've built it just do "xosview &" at the command line and you'll get a pretty little status monitor appear on your screen. I'm planning to test it tomorrow (wife permitting), so I'm not sure how it's going to behave myself. As Mike says, all feedback will be welcome. Cheers, Wol -------- Forwarded Message -------- This may help. I've turned the raid meter on by default and it is set to auto which causes it to search for and display a meter for every md device it finds. The meter gives a pretty compact overview of the raids current state in one glance. If you are able to checkout and build a copy of the source from either of these two repositories (I push to both) I'd be interested in your feedback. https://sourceforge.net/p/xosview/git/ci/master/tree/ https://github.com/mromberg/xosview I developed the new raid meter code using a few of raid1 devices (two drives per raid) with a fedora 24 setup running on a VM. But I am not an experienced raid administrator by any stretch of the imagination. I have no doubt that there are cases and configurations I have not tested or accounted for. So, I welcome any feedback on what is there so far. Mike -- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
