Greetings
Running a Raid 10 array with 4 - 3 TB drives. Have a UPS but this area
gets significant lightning and also brownout (rural power) events.
Found the array was read only this morning. Thought that rebooting the
system might correct things - - - it did not as the array did not
load.
commands used followed by system response
mdadm --detail /dev/md0
mdadm: md device /dev/md0 does not appear to be active.
cat /proc/mdstat
md0 : inactive sdc1[5](S) sdf1[8](S) sde1[7](S) sdb1[4](S)
mdadm -E /dev/sdb1
sdc1
sde1
sdf1
everything is the same except for 2 items
sde and sdf have uptime listed from July 04 05:50:46
events 64841
array state of AAAA
sdb and sdc have uptime listed from July 05 01:57:38
events 64844
array state of AAA.
Do I just re-create the array?
TIA
Dee
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
